Print Delivery Documents Transaction

You can use the Print Delivery Documents transaction to print all documents connected to a delivery.

See Using the Print Delivery Documents Transaction.

Print Delivery Documents parameters

Parameter Name Values Example Default Value
Auto confirm input field data

1:Printer

A: No. The user must confirm the value either by scanning or by entering the data manually.

B: Yes. The value is confirmed automatically.

C: Yes. The value is confirmed automatically, if the suggested data is not Blank.

D: Yes. The value is confirmed automatically, if the suggested data is Blank.

Note:  Mandatory field with blank suggested data cannot be auto confirmed. This will require input regardless of this setting..
1=C 1=A
Auto trigger Next when all fields confirmed

0: No

1: Yes

1 0
Suggest data for input field Printer

Any Printer

Note:  If no printer is set, the printer from User Settings will be suggested.
PRINTER01 Blank
Verify input field suggested data

Input fields:

1:Printer

A: No. The scanned value is not verified against the suggested value.

B: Yes. A warning message is displayed if the scanned value does not match the suggested value.

C: Yes. A warning message is displayed if the scanned value is greater than the suggested value.

D: Yes. A warning message is displayed if the scanned value is less than the suggested value.

E: Yes. The scanned value must match the suggested value.

F: Yes. The scanned value cannot be greater than the suggested value.

G: Yes. The scanned value cannot be less than the suggested value.

H: Yes. The scanned value cannot be less than the suggested value. A warning message is displayed if the scanned value is greater than the suggested value.

I: Yes. The scanned value cannot be less than the suggested value. A warning message is displayed if the scanned value is greater than the suggested value.

Note: 
  • If data is not specified, the value A is defaulted
  • Values C, D, F, G, H and I are only applicable for numeric input fields.
1=B 1=A
Note:  If you do not specify a parameter value, or you specify an invalid value, the default value will be used.