Feature Control

This section describes the feature controls that are available for WMS.

These controls are accessible through Facility > ENTERPRISE > Enterprise > Administration > Feature Control. By default, the feature flags are disabled. Enabling the flag will allow you to use the feature in WMS.

This table describes the groups that are listed under the Feature Control page. Expand each group to see the list of feature flags.

Group Description Group type
LMACTIONS Load Maintenance Actions.

When enabled, the Ship option is available under the Actions tab on the Load Maintenance page.

 Forward Only

Enabling this group type means you cannot disable the group.
OUTBOUNDLABELPRINTBYPOOLINGATZONE Outbound Label Printing based on Pooling or at zone.

When enabled, the Label Printer field is available when creating a new user under the User page and the Auto Print Carton Content Label checkbox is available under the Zone page.

 Forward Only

Enabling this group type means you cannot disable the group.
RAINBOWPALLETPUTAWAYQTYVALIDATION Rainbow Pallet Putaway Quantity Validation.

With this flag enabled, the Drop ID column is available for the rainbow pallet under the Inventory Transaction page.

 Forward Only

Enabling this group type means you cannot disable the group.
2024.10 Features in 2024.10 Release. Flex

You can switch the option to Enable or Disable the feature.
2025.10 Features in 2025.10 Release Flex

You can switch the option to Enable or Disable the feature.
2026.04 Features in 2026.04 Release Flex

You can switch the option to Enable or Disable the feature.

This table lists the feature flags that can be enabled or disabled under each group. You can have more than one feature flag under each group.

Feature Description Feature type
LMACTIONSHIP Load Maintenance Ship Action.

When shipping loads, you can only ship from the Actions tab.

 Flex

You can switch the option to Enable or Disable the feature.
POOLINGORPRINTATZONE Feature for Outbound Label Printing based on Pooling or at zone.

When printing labels, the labels are sent to the printer associated to the first zone where the case ID is picked from.

 Flex

You can switch the option to Enable or Disable the feature.
RAINBOWPALLETPUTAWAY Feature for Rainbow Pallet Putaway Quantity Validation.

When viewing inventory transactions, the Rainbow Pallet ID column and field changes to the Drop ID.

 Flex

You can switch the option to Enable or Disable the feature.
T2VINTRL Feature for Configuration Management for local packages. Flex

You can switch the option to Enable or Disable the feature.
INTTRANSFERADVSERIAL Internal Transfer Advanced Serial Entry. You can switch the option to Enable or Disable the feature.
OWNERLABELSXLIMP If this parameter is enabled, the Export Options and Import options are displayed on the Owner Labels tab of the Owner screen. You can switch the option to Enable or Disable the feature.
DRAWLINESCOLOR

Remove Line Type and add Color to Drawing Lines.

If this parameter is enabled, the Color field is displayed and the Line Type field is disabled on the Drawing Lines screen.

 You can switch the option to Enable or Disable the feature.
VOICECONSOLQTYMULTIORDERS Enables the voice selection to consolidate item pick quantities for multiple shipment orders. You can switch the option to Enable or Disable the feature.
USESHIPTOTTLSHLFLIFE

Use Minimum Shelf-Life Override Percent with Total Shelf.

If this parameter is enabled:

  • The Use Minimum Shelf Life Override Percent with Total Shelf Life at Allocation check box is displayed on the Processing tab of the ShipTo screen.
  • You can perform shelf-life allocation based on the total shelf life of an item.
 You can switch the option to Enable or Disable the feature.
CHERRYPICKMULTI Enabling a replenishment strategy for the Cherry Pick Multiple functionality.

If this parameter is enabled:

  • The Default Cherry Pick Multiple Replenishment Strategy field is displayed on the Task tab of the Owner screen.
  • The Cherry Pick Multiple Replenishment Strategy field is displayed on the Outbound tab of the Item screen.
 You can switch the option to Enable or Disable the feature.
LOADMULTIPLE Load Multiple Pallets Simultaneously.

This feature allows you to scan and load up to 10 pallets at a time.

If this parameter is enabled, the Multi Load Task option is displayed on the Load Management screen in the RF application.

 You can switch the option to Enable or Disable the feature.
PUTAWAYROTATION

System to check existing inventory during putaway process, to ensure FIFO rotation rules are followed.

If this parameter is enabled, these check boxes are displayed on the Detail tab of the Putaway strategy screen:

  • Strict FIFO Rotation Lottable04/05
  • Strict Rotation All
 You can switch the option to Enable or Disable the feature.
SUPRESSQTYPENDINGIN

Allow users to suppress quantity pending in warning messages for certain specific Location categories.

If this parameter is enabled, the PNDMVINMSG code is displayed on the Code screen. This code can be used to add the category of the locations for which you can suppress the warning message during putaway, if required.

 You can switch the option to Enable or Disable the feature.
ADDRESSLABELPRINTING If this parameter is enabled, the ORD# field is displayed on the Print Lbl/Rpt screen. This allows you to print address and container labels using the shipment order. You can switch the option to Enable or Disable the feature.
MASSTRANSFER Creating Internal Transfer from Mass Internal Transfer. If this parameter is enabled, these options are displayed from the Actions menu of the Mass Internal Transfer screen:
  • Create Transfer
  • Add to Transfer
 You can switch the option to Enable or Disable the feature.
ECOMPACKINGPHASEIII

ECommerce Packing Phase III

If this parameter is enabled, you can use these features while performing Ecommerce Packing:

  • Apply shipment order processing rules
  • Display items before selecting the carton
  • Default the list size
  • Barcode scan input for carton selection
 You can switch the option to Enable or Disable the feature.
VOICEIMPROVEMENTS Enables various voice improvements.

If this parameter is enabled, additional copies of labels can be printed during receiving activities using the Voice Receiving functionality.

 You can switch the option to Enable or Disable the feature.
XTNDATEDIFF If this parameter is enabled, the Date Diff value is displayed in the Select Date Operator field. This field can be accessed from the Rule Maintenance screen of the Extensible Business Rule menu. The Date Diff operator allows you to calculate the difference between two date bio attributes in days, hours, and minutes. Flex

You can switch the option to Enable or Disable the feature.
ASSIGNMENTCREATIONSTRATEGY

Assignment Creation Strategy

If this parameter is enabled:

  • The Assignment Creation Strategy option is displayed on the Outbound Control module.
  • The Assignment Creation Strategy field is displayed on the Task tab of the Owner screen.
 You can switch the option to Enable or Disable the feature.
PCINCLUDEEMPTYLOC

Include Empty Locations for New Physical Counting.

If this parameter is enabled, the Include Empty Locations (Wall to Wall Only) check box is displayed on the New Physical Control screen.

 Flex

You can switch the option to Enable or Disable the feature.
UITIMECLOCKGRACE

Implement the API Grace Periods in the UI Timeclock.

If this parameter is enabled, these parameters on the System Settings screen are also enabled:

  • TCLOCK_IN_PREPUNCH_GRACE
  • TCLOCK_IN_POSTPUNCH_GRACE
  • TCLOCK_OUT_PREPUNCH_GRACE
  • TCLOCK_OUT_POSTPUNCH_GRACE
 You can switch the option to Enable or Disable the feature.
SGLOUTLBLPERASSIGNCASEID If this parameter is enabled, the SGLOUTLBLPERASSIGNCASEID parameter is displayed on the System Settings screen. This enables you to print a single outer label for an assignment or Case ID, even if the Case ID contains multiple orders. Flex

You can switch the option to Enable or Disable the feature.
WAVECONSOL Automatic Wave Consolidation To Single Speedline

If this parameter is enabled:

  • The Automatically Assign Speed Lines By Area check box is displayed on the Query Builder screen.
  • The Speed Line Area field is displayed on the Outbound tab of the Item screen.
 Flex

You can switch the option to Enable or Disable the feature.
ENABLETRAILERCHECKS If this parameter is enabled, the ENABLETRAILERCHECKS system parameter is displayed on the System Settings screen. Flex

You can switch the option to Enable or Disable the feature.
EnableWaveProcessResilience If this parameter is enabled, the Paused Background Job screen is displayed. Flex

You can switch the option to Enable or Disable the feature.
ErrorMessageExternalCache If this parameter is enabled, the Error Configuration option is displayed on the Administration menu. Flex

You can switch the option to Enable or Disable the feature.
MOVEALLOCID If this parameter is enabled, the MOVEALLOCID parameter is displayed on the System Settings screen. Flex

You can switch the option to Enable or Disable the feature.
ECOMPACKINGPHASEIV If this parameter is enabled:
  • The Mandatory value is displayed in the Pack Station Location field from the Ecommerce Packing Strategy screen.
  • The USEWMIMAGESFORECOM parameter is displayed on the System Settings screen.
 Flex

You can switch the option to Enable or Disable the feature.
CYCLECOUNT

Cycle Count Enhancements

If this parameter is enabled:

  • The Maintenance Detail option is displayed on the Cycle Count functionality.
  • The Item Characteristic 1 field is displayed on the Request To Count screen.
  • The New Physical Lottable Validation field is renamed as New Physical Inventory and Cycle Count Lottable Validation.
 Flex

You can switch the option to Enable or Disable the feature.
TRANSSHIPASNENHANCEMENTS

Transship ASN Enhancements.

If this parameter is enabled:

  • Duplicate Containers: The application uses of an additional key field, to manage duplicate containers during transship receive, ship, and load processes.
  • Container ID Generation: The application automatically generates container IDs, using the Facility Control number counter.
  • Alternate SKUs: the application verifies alternate SKUs that you have specified on the RF Verify Transship screen.
 Flex

You can switch the option to Enable or Disable the feature.
WMSSHIPTOLOCALE If this parameter is enabled, the shipment-related documents are printed based on the settings defined on the ShipTo and Reports screens.

You can switch the option to Enable or Disable the feature.
INVDATESRESET

If this parameter is enabled:

  • The Reset option is displayed on the Inventory Dates screen. You can use this option to reset the inventory dates master record by updating the next bill date.
  • The application deletes recurring billing charges that have a status other than Invoice.

You can switch the option to Enable or Disable the feature.
ALLWORKMAKEASSGNBG

Move the All Work Make Assignment process to Single Threaded Batch Process

  • If this parameter is enabled, the Background Job Status screen displays a single record for the assignment, shipment order, or wave after clicking the Make Assignments option on the All Work screen. This action reduces system load and improves performance.
  • If this parameter is not enabled, the Background Job Status screen displays all related pick detail records for the assignment, shipment order, or wave.
Note: You must enable the BACKGROUNDPROCESSRFLPNREC parameter on the System Settings screen.

You can switch the option to Enable or Disable the feature.
CLRQTYPENDING

If this parameter is enabled:

  • The Clear Quantity pending In job is displayed on the Job List screen.
  • The CLRQTYPND script is displayed on the Archive Setup screen.

When you run the Clear Quantity pending In job, the application sets the Qty Pending In field value to zero on the Inventory Balances screen for relevant inventory records. This action ensures that the pending quantities do not interfere with future operations such as Putaway or Move, and prevents errors caused by pending values.

Note: The job is executed based on the number of days configured on the Archive Setup screen.

You can switch the option to Enable or Disable the feature.
MULTITHREADCONTROLFORKITTINGPROCESS

If this parameter is enabled:

  • The Initial ProcessHID and IsMultithread Process columns are displayed on the Background Job Process Review screen.
  • The application separates the receiving process from the shipping process for KIT Order ASN when a user starts receiving the KIT Order ASN in the RF application.

The application validates the data during receiving and automatically starts a background job for shipping. You can verify the shipping status on the Background Job Status screen.

Note: You must enable the BKGJOBFORSINGLESCANLPNKITASN parameter on the System Settings screen to enable this functionality.

You can switch the option to Enable or Disable the feature.
REMOVEFROMTOQTYEQCHECK

If this parameter is enabled, the application skips validation of the From Quantity and To Quantity fields on the Internal Transfer screen. This setting is used to bypass validation errors when transferring items with quantities that differ from the From Quantity and To Quantity values defined by pack UOMs.

Note: You must enable the INTERNALXFERQTYVAL parameter on the System Settings screen to use this functionality.

You can switch the option to Enable or Disable the feature.
MASSOVERRIDE If this parameter is enabled, the Finalize with Override Date option is displayed in the Action list menu. This list menu can be accessed from the Mass Internal Transfer screen.

You can switch the option to Enable or Disable the feature.
ASSGPICKPERFORM If this parameter is enabled, the Streamline Pick menu is displayed in the RF application. This option can be accessed from the WMS Main Menu > Outbound Menu > Pick Menu > Streamline Pick.

You can use this menu to access the updated Assignment and Clustered Assignment picking screens.

You can switch the option to Enable or Disable the feature.
UISHELFLIFEVAL

If this parameter is enabled, the application enables you to receive ASN detail lines that failed during the Inbound Shelf Life validation.

You can perform this action on these ASN screens:

  • Facility > Warehouse > WMS > Inbound > ASN/Receipt > Actions > Receive All
  • Facility > Warehouse > WMS > Inbound > ASN/Receipt Detail > Actions > Receive

You can switch the option to Enable or Disable the feature.
BGJOBSHIPMENTORDERPICK If this parameter is enabled, the application processes the picking tasks on Background Job Process Review screen.

You can switch the option to Enable or Disable the feature.
SHIPMENTLINECANCEL If this parameter is enabled, the Cancel Line option is displayed in the Actions detail list menu on the Shipment Order and the Shipment Detail screens. If you enable this parameter, the application allows you to cancel individual shipment order lines when inventory is unavailable. However, you can process the remaining order lines in the shipment order.

You can switch the option to Enable or Disable the feature.
TMPICKZONE If this parameter is enabled:
  • The task manager picking permissions are determined using the Picking Zone field. This field can be accessed on the Location screen.
  • The TMPICKZONE parameter is displayed on the System Settings screen. Based on the setting, the application creates assignments using picking zones instead of putaway zones.

You can switch the option to Enable or Disable the feature.
UPDITEMCUBEBASEDONDIMS

If this parameter is enabled, the ITEMCUBEUPDATEFROMPACKDIMS and GENCOMMODITYUPDATEDEVENTSWITHPACKUPDATES parameters are displayed on the Configuration Settings screen. This screen can be accessed from the Administration menu.

If you enable the configuration parameters, the cube for all items are updated based on the dimensions specified on the Dimensions tab of the Pack screen.

You can switch the option to Enable or Disable the feature.
SETCUSTOMERONHOLD

If this parameter is enabled, these options are displayed:

  • Enable/Disable(Owner screen at Enterprise level)
  • Hold/Inactive and Allow Receiving for Owner on hold(Processing tab of the Owner screen at the Warehouse level)

If these options are enabled, you can set a specific owner to on-hold or inactive, which stops new receipts or shipments for the owner. However, stocks can be moved when moving inventory to a new location or area.

You can switch the option to Enable or Disable the feature.
CARTASGNIP

If this parameter is enabled, these parameters are displayed on the System Settings screen:

  • CARTASGNIMP
  • OPTIMIZEASSIGNMENTS
  • ASSGNBUILDPER

When you enable the system setting parameters, the application enhances cartonization and assignment building by applying carton‑splitting and optimization logics. The application does not split the case IDs during assignment building.

You can switch the option to Enable or Disable the feature.
UPDATESKUXLOCLOT If this parameter is enabled, the UPDATESKUXLOCLOT parameter is displayed on the System Settings screen. If the system settings parameter is enabled:
  • The lot numbers are populated for the assigned speed line when an item is moved, replenished, or adjusted in the specified location.
  • The application allocates inventory from the assigned speed pick location first instead of the speed pick location defined during the wave creation.

You can switch the option to Enable or Disable the feature.
COUNTERSALESPHASEII

If this parameter is enabled, the application auto picks orders that customers pick manually and bring to the counter. A store associate specifies the customer order in ERP, and the application auto picks the items.

Serial numbers are also captured for items that are auto‑picked.

Note: This functionality is enabled when the Order Type field is set to Countersale on the Shipment Order screen. When a Countersale order is created and released, and the inventory is picked from locations whose category type is Counter, the order is automatically updated to the Picked status.

You can switch the option to Enable or Disable the feature.
EBRFACILITYCONTROL

Facility Control for Extensible Business Rules

If this parameter is enabled, the Facility Control menu is displayed on the Rule Maintenance screen. This option allows users to add or remove facilities for multiple EBRs simultaneously.

You can switch the option to Enable or Disable the feature.