Executing an RF-assisted replenishment

To execute an RF-assisted replenishment:

  1. Select Replenish & Move (3) > Replenishment (1) from the RF device Main menu. The Input Zones (RP) screen is displayed.
  2. Perform one of these actions:
    • Specify the name of each pick zone for which you are calculating replenishment requirements.
    • Type ALL in the first ZONE field and press Enter twice. The first five replenishment tasks are displayed.
    Note: 
    • If you specify or scan ALL, the application retrieves up to the first five replenishment tasks.
    • If you specify a pick zone in field 1, the application displays only the replenishment tasks for that zone (From and To locations within the zone).
    • If you specify additional pick zones in the remaining fields, the application displays replenishment tasks for each of those zones and allows crossover between the zones.
    • Based on warehouse requirements, WM can be configured to display more than five zone fields.
  3. Accept the first task, or select a different task by pressing 6 (forward) or 4 (back) on the Replenishment (RP02) screen

    This information is displayed:

    ITEM
    The item to be replenished.
    SLIFE
    The shelf-life days assigned o the pick location.
    Note: 
    • This field is displayed only if the Replenishment Shelf Life field is populated on the Assign Locs tab on the Item screen.
    • The application displays an error message if the inventory does not meet the required shelf-life criteria.
    From
    The location from which the item is replenished.
    Lpn
    The license plate number of the item (if there is one).
    Qty
    The total number of items to replenish.
    UOM
    The Unit of measure for the item, such as case, pallet, innerpack, or each.
    Note: If the quantity on the source pallet exeeds the pallet quantity defined in the item's Pack Key, the application displays the inventory quantity in EA instead of PL. To enable this functionality, you must enable the REPLENWITHOVERSIZEPALLETS and USEPACKUOMONRF parameters on the System Settings screen.
    To
    The destination of the items (location to replenish).
  4. Press Enter to accept the task. The Replenishment (RP03) screen is displayed.
  5. Specify this information:
    From
    The location from which the item is replenished
    Item
    The item being replenished.
    Lpn
    The license plate number of the item.
    Lpn Qty
    The quantity of lpn.
    Residue
    The computed difference between the lpn quantity and the replenishment quantity.
    Lot (Display Only)
    Lot number associated with the item being replenished
    Repl Qty
    Amount of items to replenish.
    to (In Transit Loc)
    Temporary location for the move to record the first step of the transaction. This field can be used differently on operation needs. Possible uses include:
    • Use a default value of INTRANSIT to show the inventory is in process. If always leaving this as INTRANSIT, the RF screen can be modified to hide the field from the user.
    • Enable the operator to specify or scan a different temporary location, such as an equipment ID number. This improves the tracking of the physical location of the inventory while the move is in process.
    ToLoc
    The location where the item is placed.
    Note: You can view and select the assigned pick location for an item using the F2 function key or lookup field. The assigned locations are displayed with location type (Pick, Case, or Layer), based on the locations specified for the item on the Assign Locs tab of the Item screen. See Item pick location configuration (Assign Locations tab) topic from Infor WMS User and Administration Library (Cloud).
  6. Specify the reason code.
  7. Press Enter twice. The next replenishment list is displayed.
  8. Repeat steps 3-6 to complete additional replenishment tasks.