Labels tab

Use this tab to define the Inbound LPN length, enable RF auto-printing of LPN labels at receipt, and specify the outbound labels required for shipping and for the BOL.

You can specify this information on the Labels tab:

Inbound LPN Prefix
Optional prefix for system generated inbound LPN IDs.
Inbound LPN Length
The total length of the inbound LPN Id including the prefix.
RF Auto Print LPN Label at Receipt
Determines if the LPN label is automatically printed after RF receiving.
RF Auto Fill Generated LPN Id
Determines if the LPN field on the RF receiving screens is auto-filled when a new LPN is generated.
Receipt Unit Label Name
The Label Name of the Receipt Unit Label to be printed during RF receiving.
Receipt Unit Label UOM
The UOM to be used when printing Receipt Unit Labels. For example, if the Receipt Unit Label UOM is set to Case, a label is printed for each received case based on the received PACK. Receipt Unit Labels are not printed if the received PACK does not contain a value for the specified UOM.
LPN Barcode Symbology
Supported symbology used by the owner, based on the Loftware server package used to print them.
LPN Barcode Format

Supported barcode format used by the owner.

If you choose SSCC, the License plate number is the parsed combination of the following fields in order:

  • SSCC 1st Digit
  • UCC Vendor #
  • Next PALLETID (from Number Control) [nine (9) digits]
  • Check digit (calculated based on the previously mentioned digits)

    If you choose user-defined, the PALLETID (from Number Control) is used for the license plate number.

LPN Length

Length of LPN(s) allowed for the owner.

If the LPN Barcode Format field is set to SSCC, the proper setting for this field is nine (9) based on current UCC standards. The acceptable length for user-defined numbers is 6-18.

Application ID

Application identifier of the LPN.

This field is only active when the symbology you select is equal to UCC128.

Default value: 00

SSCC 1st Digit

First digit to use for the SSCC format. This field is only active when the label format you select is equal to SSCC.

Default value: 0

UCC Vendor #
Vendor number the UCC assigned to the owner.
Note: If available, the UCC vendor number is reflected in the initial digits of a generated Bill of Lading number.
Standard Outbound Label Prefix
Optional prefix for standard outbound LPN IDs (STD Case).
Case Label Type
Label type to be used when labels are generated during allocation. Available options include:
  • STD Case Labels
  • SGTIN Case Labels
  • SSCC Case Labels
Outbound Labels Required to Ship
Determines if outbound case labels must be printed before shipment orders may be shipped. Prevents shipping or warns the user if outbound case labels have not been printed.
Outbound Labels Required for BOL
Determines if outbound case labels must be printed before the Bill of Lading report may be printed. Prevents printing of the BOL or warns the user if outbound case labels have not been printed.
Outbound Labels Level
Determines which outbound labels will be printed (Inner, Outer, etc.).
Outbound Labels Count Level
Determines the level used when generating label counts (1 of N). For example, if the count level is Order, then the N count is the total label count for the Order.

You can also specify this information under LPN Format Validation For Picking:

Length
Specify the length of the LPN format.
Masking Format
Specify a masking syntax to ensure the correct format is used for the string being scanned as the serial number. These masking configuration values are valid:
  • N = Numeric
  • A = Alpha
  • C = Alpha or Numeric
  • D = Character (-.#,*)
  • B = Blank

Examples:

  • If the item serial is AABBCC1234, the masking format should be AAAAAANNNN.
  • If the item serial is SER-90800A-10001, the masking format should be AAADNNNNNADNNNNN.

Regardless of when the serial is scanned, the masking format is checked to ensure that the number being scanned is consistent with a syntax identified for the item. If it is not, you cannot complete the transaction.

LPN Prefix
Specify a prefix for system generated LPN IDs.

You can specify this information under LPN Format Validation For Packing:

Length
Specify the length of the LPN format.
Masking Format
Specify a masking syntax to ensure the correct format is used for the string being scanned as the serial number. These masking configuration values are valid:
  • N = Numeric
  • A = Alpha
  • C = Alpha or Numeric
  • D = Character (-.#,*)
  • B = Blank

Examples:

  • If the item serial is AABBCC1234, the masking format should be AAAAAANNNN.
  • If the item serial is SER-90800A-10001, the masking format should be AAADNNNNNADNNNNN.

Regardless of when the serial is scanned, the masking format is checked to ensure that the number being scanned is consistent with a syntax identified for the item. If it is not, you cannot complete the transaction.

LPN Prefix
Specify a prefix for system generated LPN IDs.

You can specify this information under LPN Format Validation For Loading:

Length
Specify the length of the LPN format.
Masking Format
Specify a masking syntax to ensure the correct format is used for the string being scanned as the serial number. These masking configuration values are valid:
  • N = Numeric
  • A = Alpha
  • C = Alpha or Numeric
  • D = Character (-.#,*)
  • B = Blank

Examples:

  • If the item serial is AABBCC1234, the masking format should be AAAAAANNNN.
  • If the item serial is SER-90800A-10001, the masking format should be AAADNNNNNADNNNNN.

Regardless of when the serial is scanned, the masking format is checked to ensure that the number being scanned is consistent with a syntax identified for the item. If it is not, you cannot complete the transaction.

From LPN Prefix
Specify a prefix for system generated from LPN IDs.
To LPN Prefix
Specify a prefix for system generated to LPN IDs.