Feature Control

This section describes the feature controls that are available for WMS.

These controls are accessible through Administration > Feature Control. By default, the feature flags are disabled. Enabling the flag will allow you to use the feature in WMS.

This table describes the groups that are listed under the Feature Control page. Expand each group to see the list of feature flags.

Group Description Group type
LMACTIONS Load Maintenance Actions.

When enabled, the Ship option is available under the Actions tab on the Load Maintenance page.

 Forward Only

Enabling this group type means you cannot disable the group.
OUTBOUNDLABELPRINTBYPOOLINGATZONE Outbound Label Printing based on Pooling or at zone.

When enabled, the Label Printer field is available when creating a new user under the User page and the Auto Print Carton Content Label checkbox is available under the Zone page.

 Forward Only

Enabling this group type means you cannot disable the group.
RAINBOWPALLETPUTAWAYQTYVALIDATION Rainbow Pallet Putaway Quantity Validation.

With this flag enabled, the Drop ID column is available for the rainbow pallet under the Inventory Transaction page.

 Forward Only

Enabling this group type means you cannot disable the group.
2024.10 Features in 2024.10 Release. Flex

You can switch the option to Enable or Disable the feature.
2025.04 Features in 2025.04 Release. Flex

You can switch the option to Enable or Disable the feature.
2025.10 Features in 2025.10 Release Flex

You can switch the option to Enable or Disable the feature.

This table lists the feature flags that can be enabled or disabled under each group. You can have more than one feature flag under each group.

Feature Description Feature type
LMACTIONSHIP Load Maintenance Ship Action.

When shipping loads, you can only ship from the Actions tab.

 Flex

You can switch the option to Enable or Disable the feature.
POOLINGORPRINTATZONE Feature for Outbound Label Printing based on Pooling or at zone.

When printing labels, the labels are sent to the printer associated to the first zone where the case ID is picked from.

 Flex

You can switch the option to Enable or Disable the feature.
RAINBOWPALLETPUTAWAY Feature for Rainbow Pallet Putaway Quantity Validation.

When viewing inventory transactions, the Rainbow Pallet ID column and field changes to the Drop ID.

 Flex

You can switch the option to Enable or Disable the feature.
T2VINTRL Feature for Configuration Management for local packages. Flex

You can switch the option to Enable or Disable the feature.
INTTRANSFERADVSERIAL Internal Transfer Advanced Serial Entry. You can switch the option to Enable or Disable the feature.
WMSBIRSTREPORTSTOIDM Send WMS Birst Report to IDM. You can switch the option to Enable or Disable the feature.
RLSASSIGNLASTPCK Release Inactive Assignment Based on Last Pick.

The assignments that are not active are automatically released or cleared, based on the status of the most recent pick operation.

 You can switch the option to Enable or Disable the feature.
INTEGRATIONLOGSRESETERROR Integration Logs Screen Reset Error Enhancement.

This feature allows you to enable the Reset Error option. This option is used to clear multiple logs from the Integration Logs screen.

 You can switch the option to Enable or Disable the feature.
PTGSORTBYLOTTABLE Pick to Grid Sort by Requested Lottable.

The PTG (Pick To Grid) Sort feature prioritizes and sorts the order details, if lottables are specified for an order.

 You can switch the option to Enable or Disable the feature.
SHORTPICKTOZERO If the feature is enabled, the Clear All Allocated Inventory from Pick Location after First Short Pick check box is displayed on the Reason screen.

This feature is used to move inventory from the pick location to a configured location when the inventory for a first pick item is not available at the pick location.

 You can switch the option to Enable or Disable the feature.
MOVEZEROCOUNTCC Move zero cycle counts to location.

This feature enables you to move items in the inventory based on the system data. This feature is used when the correct inventory data is not displayed in the RF device when performing the cycle count.

 You can switch the option to Enable or Disable the feature.
STOPCOMPMSGFORDA Stop complete message for DA Pick by Load.

This feature allows system to display a confirmation message when a RF user completes all picks for a stop based on load ID before moving to the next stop. This helps in proper loading on the truck during pre-staging.

 You can switch the option to Enable or Disable the feature.
SHELFLIFEREQDELIVDTE If this parameter is enabled, the Use Requested Delivery Date with Shelf Life Allocation check box is displayed on these screens:
  • Owner (Task tab)
  • Shipment Order Header (Ship tab)

This feature enables the system to determine the appropriate inventory item for shipment order allocation, based on the requested delivery date and the outbound shelf life of the item.

 You can switch the option to Enable or Disable the feature.
INVBALCSPL When this feature is enabled, the system displays the Case On Hand and Pallet On Hand fields on theInventory Balance screen. These fields are used to view case and pallet level quantities for each inventory item. You can switch the option to Enable or Disable the feature.
PAFORLOCATIONSTATUS

Putaway strategy for location status.

If this parameter is enabled, the Location Status field is displayed on the Location Detail tab of the Putaway screen.

 You can switch the option to Enable or Disable the feature.
IGNORESTAGELOCPUT

Ignore Staging Locations for Putaway.

If this parameter is enabled, the IGNORESTAGELOCPUT system parameter is displayed on the System Settings screen.

This functionality is used to skip the inbound and outbound pick and drop (PND) locations for the putaway task.

 You can switch the option to Enable or Disable the feature.
TALLYPCKDETAILS Record Tally Picking Details.

If this parameter is enabled, the TALLYPCKDETAILS system parameter is displayed on the System Settings screen.

 You can switch the option to Enable or Disable the feature.
EXPIREDAGEDINVHOLD Auto Hold of expired inventory or aged inventory using threshold days.
If this parameter is enabled:
  • When the Expiration Auto Hold by Lot job is run, the system puts on hold the inventory lots that are expired or close to the expiry date based on item settings.
  • The Shelf Life Auto Hold By Lot – Expired, Shelf Life Auto Hold By Lot – Pre-Expired, and Shelf Life Auto Hold Threshold Days fields are displayed on the Outbound tab of the Item screen.
 You can switch the option to Enable or Disable the feature.
OWNERLABELSXLIMP If this parameter is enabled, the Export Options and Import options are displayed on the Owner Labels tab of the Owner screen. You can switch the option to Enable or Disable the feature.
DRAWLINESCOLOR

Remove Line Type and add Color to Drawing Lines.

If this parameter is enabled, the Color field is displayed and the Line Type field is disabled on the Drawing Lines screen.

 You can switch the option to Enable or Disable the feature.
VOICECONSOLQTYMULTIORDERS Enables the voice selection to consolidate item pick quantities for multiple shipment orders. You can switch the option to Enable or Disable the feature.
USESHIPTOTTLSHLFLIFE

Use Minimum Shelf-Life Override Percent with Total Shelf.

If this parameter is enabled:
  • The Use Minimum Shelf Life Override Percent with Total Shelf Life at Allocation check box is displayed on the Processing tab of the ShipTo screen.
  • You can perform shelf-life allocation based on the total shelf life of an item.
 You can switch the option to Enable or Disable the feature.
CHERRYPICKMULTI Enabling a replenishment strategy for the Cherry Pick Multiple functionality.
If this parameter is enabled:
  • The Default Cherry Pick Multiple Replenishment Strategy field is displayed on the Task tab of the Owner screen.
  • The Cherry Pick Multiple Replenishment Strategy field is displayed on the Outbound tab of the Item screen.
 You can switch the option to Enable or Disable the feature.
LOADMULTIPLE Load Multiple Pallets Simultaneously.

This feature allows you to scan and load up to 10 pallets at a time.

If this parameter is enabled, the Multi Load Task option is displayed on the Load Management screen in the RF application.

 You can switch the option to Enable or Disable the feature.
PUTAWAYROTATION

System to check existing inventory during putaway process, to ensure FIFO rotation rules are followed.

If this parameter is enabled, these check boxes are displayed on the Detail tab of the Putaway strategy screen:

  • Strict FIFO Rotation Lottable04/05
  • Strict Rotation All
 You can switch the option to Enable or Disable the feature.
SUPRESSQTYPENDINGIN

Allow users to suppress quantity pending in warning messages for certain specific Location categories.

If this parameter is enabled, the PNDMVINMSG code is displayed on the Code screen. This code can be used to add the category of the locations for which you can suppress the warning message during putaway, if required.

 You can switch the option to Enable or Disable the feature.
ADDRESSLABELPRINTING If this parameter is enabled, the ORD# field is displayed on the Print Lbl/Rpt screen. This allows you to print address and container labels using the shipment order. You can switch the option to Enable or Disable the feature.
MASSTRANSFER Creating Internal Transfer from Mass Internal Transfer. If this parameter is enabled, these options are displayed from the Actions menu of the Mass Internal Transfer screen:
  • Create Transfer
  • Add to Transfer
 You can switch the option to Enable or Disable the feature.
ECOMPACKINGPHASEIII

ECommerce Packing Phase III

If this parameter is enabled, you can use these features while performing Ecommerce Packing:
  • Apply shipment order processing rules
  • Display items before selecting the carton
  • Default the list size
  • Barcode scan input for carton selection
 You can switch the option to Enable or Disable the feature.
VOICEIMPROVEMENTS Enables various voice improvements.

If this parameter is enabled, additional copies of labels can be printed during receiving activities using the Voice Receiving functionality.

 You can switch the option to Enable or Disable the feature.
XTNDATEDIFF If this parameter is enabled, the Date Diff value is displayed in the Select Date Operator field. This field can be accessed from the Rule Maintenance screen of the Extensible Business Rule menu. The Date Diff operator allows you to calculate the difference between two date bio attributes in days, hours, and minutes. Flex

You can switch the option to Enable or Disable the feature.
ASSIGNMENTCREATIONSTRATEGY

Assignment Creation Strategy

If this parameter is enabled:
  • The Assignment Creation Strategy option is displayed on the Outbound Control module.
  • The Assignment Creation Strategy field is displayed on the Task tab of the Owner screen.
 You can switch the option to Enable or Disable the feature.
PCINCLUDEEMPTYLOC

Include Empty Locations for New Physical Counting.

If this parameter is enabled, the Include Empty Locations (Wall to Wall Only) check box is displayed on the New Physical Control screen.

 Flex

You can switch the option to Enable or Disable the feature.
UITIMECLOCKGRACE

Implement the API Grace Periods in the UI Timeclock.

If this parameter is enabled, these parameters on the System Settings screen are also enabled:
  • TCLOCK_IN_PREPUNCH_GRACE
  • TCLOCK_IN_POSTPUNCH_GRACE
  • TCLOCK_OUT_PREPUNCH_GRACE
  • TCLOCK_OUT_POSTPUNCH_GRACE
 You can switch the option to Enable or Disable the feature.
SGLOUTLBLPERASSIGNCASEID If this parameter is enabled, the SGLOUTLBLPERASSIGNCASEID parameter is displayed on the System Settings screen. This enables you to print a single outer label for an assignment or Case ID, even if the Case ID contains multiple orders. Flex

You can switch the option to Enable or Disable the feature.
WAVECONSOL Automatic Wave Consolidation To Single Speedline
If this parameter is enabled:
  • The Automatically Assign Speed Lines By Area check box is displayed on the Query Builder screen.
  • The Speed Line Area field is displayed on the Outbound tab of the Item screen.
 Flex

You can switch the option to Enable or Disable the feature.
ENABLETRAILERCHECKS If this parameter is enabled, the ENABLETRAILERCHECKS system parameter is displayed on the System Settings screen. Flex

You can switch the option to Enable or Disable the feature.
EnableWaveProcessResilience If this parameter is enabled, the Paused Background Job screen is displayed. Flex

You can switch the option to Enable or Disable the feature.
ErrorMessageExternalCache If this parameter is enabled, the Error Configuration option is displayed on the Administration menu. Flex

You can switch the option to Enable or Disable the feature.
MOVEALLOCID If this parameter is enabled, the MOVEALLOCID parameter is displayed on the System Settings screen. Flex

You can switch the option to Enable or Disable the feature.
ECOMPACKINGPHASEIV If this parameter is enabled:
  • The Mandatory value is displayed in the Pack Station Location field from the Ecommerce Packing Strategy screen.
  • The USEWMIMAGESFORECOM parameter is displayed on the System Settings screen.
 Flex

You can switch the option to Enable or Disable the feature.
CYCLECOUNT

Cycle Count Enhancements

If this parameter is enabled:
  • The Maintenance Detail option is displayed on the Cycle Count functionality.
  • The Item Characteristic 1 field is displayed on the Request To Count screen.
  • The New Physical Lottable Validation field is renamed as New Physical Inventory and Cycle Count Lottable Validation.
 Flex

You can switch the option to Enable or Disable the feature.
TRANSSHIPASNENHANCEMENTS

Transship ASN Enhancements.

If this parameter is enabled:
  • Duplicate Containers: The application uses of an additional key field, to manage duplicate containers during transship receive, ship, and load processes.
  • Container ID Generation: The application automatically generates container IDs, using the Facility Control number counter.
  • Alternate SKUs: the application verifies alternate SKUs that you have specified on the RF Verify Transship screen.
 Flex

You can switch the option to Enable or Disable the feature.