Inbound Tab

  1. Click the Inbound tab.
  2. Specify this information:

    AUTOMATIC HOLDS CONTROL

    Automatic License Plate Hold at Receipt
    Hold code to use if the item is automatically placed on license plate hold upon receipt. This is only used if a LPN is assigned.

    Hold code to use if the item is automatically placed on license plate hold upon receipt. This is only used if a LPN is assigned.

    Calculate Automatic License Plate Hold Release Using
    Identifies the criteria to be used to calculate the date and time to automatically release a license plate hold.
    Note: Only used if the hold is to be automatically released.

    This can be calculated using either:

    • The Date/Time of the Receipt
    • The Manufacture Date (Lottable04 Value) recorded
    Number of Hours for Automatic License Plate Hold
    The number of hours to keep the LPN on hold if an automatic release is desired. Leave this as zero (0) if there is not going to be an automatic release.
    LOT Hold Code
    Hold reason to be applied when a new lot is received for this item.
    Calculate Automatic LOT Hold Release Using
    Identifies the criteria to be used to calculate the date and time to automatically release a lot hold.
    Note: Only used if the hold is to be automatically released.

    This can be calculated using either:

    • The Date/Time of the first receipt for the lot number
    • The Manufacture Date (Lottable04 Value) recorded
    Number of Hours for Automatic LOT Hold
    The number of hours to keep the LOT on hold if an automatic release is desired. Leave this as zero (0) if there will not be an automatic release

    PUTAWAY CONTROL

    Putaway Strategy
    Strategy to be used for item putaway. Required.
    Putaway Zone
    Zone where the item is to be put away. Required.
    Auto Move Strategy
    Strategy to be used for item putaway with Auto Move criteria.
    Putaway Class
    This is used by the system when a mixed license plate is created at receipt to ensure all items on the LPN have the same classification and should be put away together. Putaway Classes used here can defined in System Codes, Code PACLASS.
    Putaway Location
    Location where the item is to be put away. Required.
    Stack Limit
    Maximum number of pallets that can be stacked vertically for this SKU. Used if a putaway strategy has the Dimension Restriction set to Fit by Stack Limit.

    Default value: 0

    Capture Inbound Temperature
    Specify Yes to require operators to enter temperature readings during the receiving process for this item. Temperature readings can be entered on RF screens and on the ASN/Receipt screens for each pallet on a load.
    Max Pallets Per Zone
    Maximum number of pallets that can be put away to any one zone for this SKU. This is used if a putaway strategy has the Dimension Restriction set to Fit by Zone Limit.

    Default value: 0

    Receipt Validation
    This is the same field seen on the Owner screen. The owner value is used as a default for this field, which determines the validation logic to be used when the SKU is received. Required
    RF Default Receiving Pack
    Default pack to use for the item at time of receipt. Can be overridden after the item is received.
    RF Default Receiving UOM
    Default UOM to use with the item at time of receipt. Can be overridden after the item is received.
    Item Type

    Select the Item Type. Options are:

    • Items are not COOL/BIO-Terrorism Compliant
    • Items are COOL Compliant
    • Items are BIO-Terrorism Compliant
    • Items are both COOL and BIO-Terrorism Compliant
    Allow Multiple Lot LPN of This Item
    Indicator that determines if multiple lot license plates are allowed for the item. This is checked during receipt and inventory moves to provide additional control for the item.
    Manual Setup Required
    Indicator that determines whether manual setup is required for this item.
    Inbound QC Location
    Location used when an outbound inspection location has not been specified for an item to be inspected.
    Return Location
    Location used along with a putaway strategy when receiving an ASN with a Return type.
    Receipt Unit Label Name
    The Label Name of the Receipt Unit Label to be printed during RF receiving.
    Receipt Unit Label UOM
    The UOM to be used when printing Receipt Unit Labels. For example, if the Receipt Unit Label UOM is set to Case, a label is printed for each received case based on the received PACK. Receipt Unit Labels are not printed if the received PACK does not contain a value for the specified UOM.
    QC Complete on first receipt of item
    Indicates if the QC is performed the first time this item is received into the warehouse. This field is not selectable/editable on this screen. The field value (selected/not selected) indicated reflects the selection made within the Inbound QC sampling rule.