Processing Tab

Default Discrepancy Handling Rule

Default value for Cycle Count Discrepancy

Rule to be used when creating a new item. When a new item is being created and you do not enter a value for the Cycle Count Discrepancy Rule, then the application must use the rule defined on the owner.

Default value: Standard – Count by Details

Cycle Count Adjustment during Picking:

Determines the type of RF picking that can force cycle counts to be performed as part of the pick. Options are:

Both RF-assisted and RF-directed
RF-directed
RF-assisted
Neither RF-assisted or RF-directed

Perform using Item and Location Level

Check box indicator that determines whether a cycle count task is performed at the item and location level.

If the check box is selected, the function is On. If the check box is cleared, the function is Off.

Default Each Piece Scan for New Physical Count

Select the check box to enable an each piece scan for a new physical count. Physical count scans are performed using an RF.

Ignore Zero Counts when re-generating CC Tasks

Select the check box to stop the creation of new cycle count tasks when inventory balances are zero.

Perform using Item and Location Level

Check box indicator that determines whether a physical inventory task is performed at the item and location level.

If the check box is selected, the function is On. If the check box is cleared, the function is Off.

Automatically Finalize Production Order

Check box indicator that determines if the production order is closed when a "Close" message is received from the host.

If the check box is selected, the close process is initialized when the interface sends the close message. If the check box is cleared (not selected), the close process is triggered when the user selects the Initialize Close process from RF. The default value is check box cleared (not selected).

Create Moves from Production Staging for Counts

Check box indicator that determines if move tasks are created for production order items.

If the check box is selected, the system creates move tasks for production order items that meet certain criteria. Cycle counts are then created following the completion of the move task. If the check box is cleared (not selected), the system creates cycle count tasks for the production staging location. The default value is check box cleared (not selected).

Cycle Count Location for Production Inventory

Indicates the selected location. Click the lookup icon to display and select the applicable location within the list.

Small Parcel Account Number

The small parcel account number used by this owner.

Small Parcel Cost Center

The small parcel cost center used by this owner.

Print SPS Return Label

Selection that determines whether an SPS Return Label is printed (Yes) or not printed (No).

Default Dimension Unit

The default unit of measure (centimeters or inches) for small parcel dimensions.

Default Weight Unit of Measure

The default unit of measure (kilograms or pounds) for small parcel weight.

Default SPS API Override Strategy

Selection that determines the SPS API override strategy used for this owner. Note that this field is optional; you only need to select a specific strategy for owners with special small parcel requirements. You may leave the field empty if there are no owner-specific rules.

Allow Commingled LPN

Indicator that determines whether more than one item can exist on the same LPN.

Allow Auto Close ASN

Indicator that determines whether the application closes the ASN automatically after completion of receipt. Required.

Allow Auto Close PO

Indicator that determines whether the application closes the PO automatically after completion of receipt. Required.

Allow System Generated LPN

Indicator that determines whether system-generated LPNs are used during RF Receiving, or if the user must enter LPN values.

Note: If the Allow System Generated LPN(s) option is set to Yes, barcode symbology must be selected.

Allow Single Scan Receiving

Indicator that determines whether the application allows the Auto Receipt option on the ASN to be set to Yes.

Receiver performs putaway

Determines if the Receiver gets putaway after receipt. These values are valid:

None
Rainbow Pallet
Single Scan
All Receipts

Default Putaway sequence for Rainbow and Stocker Putaway

Determines how the Putaway sequence tasks for rainbow and stocker putaway are presented to the user. These values are valid:

Putaway Sequence
Reverse Creation Sequence
Location Route Sequence

Prompt Receiver to Perform Putaway

Select if the Receiver is to do the putaway after receipt.

Receipt Validation Template

Template used for the owner receipt activity at the facility. This value is used as a default for the field of the same name on the SKU.

Default value: Warehouse Standard

Barcode Configuration Template

Owner barcode template.

Default value: Warehouse Standard

Default Tracking for Case Receipts

Default preference indicating how inventory should be managed after case level receiving. The options are:

LPN - Once received, the inventory is tracked by the outer license plate, usually attached to a pallet.
Case - Once received, the inventory is tracked by the case identification number applied to each inner carton (Case ID).

Duplicate Case IDs (for Case Level Receiving only)

Determines how duplicate case IDs should be handled for case level receiving. Any ASN created by this owner can handle a duplicate case ID based on the option selected. The options available for this field are:

Duplicate Case IDs allowed
The application does not verify whether the Case ID has already been received. In this setting, you are not informed that a Case ID has already been received.
Allowed on Different Receipts
Before allowing the receipt transaction to complete, the application verifies the current ASN/Receipt record to ensure the Case ID has not previously been recorded as Received, for the ASN.
Not Allowed in System
Before allowing the receipt transaction to complete, the application verifies all LPN Detail records in the application to ensure the Case ID has not previously been recorded as Received, for any ASN.

Quarantine QC Rejected Product

Select check box if a product rejected during inspection should be quarantined.

Print Packing Validation Report

Select applicable value from drop-down menu to specify when or if a Packing Validation Report is automatically printed during the packing process.

None - Report is not printed. None is the default value.
Before - Report is printed before the packing process.
After - Report is printed after the packing process.
Both - Report is printed both before and after the packing process.

Print Packing List Report

Select applicable value from menu to specify when or if a Packing List is automatically printed during the packing process.

None - Report is not printed. None is the default value.
Before - Report is printed before the packing process.
After - Report is printed after the packing process.
Both - Report is printed both before and after the packing process.

Print Contents Report

Select applicable value from menu to specify when or if a Contents Report is automatically printed during the packing process.

None - Report is not printed. None is the default value.
Before - Report is printed before the packing process.
After - Report is printed after the packing process.
Both - Report is printed both before and after the packing process.

Auto Print Address Labels at Pack

Check box indicating whether the address labels are automatically printed during the packing process. Default value is Off (box in not checked).

Auto Print Order Labels at Pack

Check box indicating whether the order labels are automatically printed during the packing process. Default value is Off (box in not checked).

Auto Print if All LPN in the Order has Packing Closed

Check box indicating whether the order labels are automatically printed only if all orders are fully packed and closed. Default value is Off (box in not checked).

LPN Consolidation at Picking

Select an option from the list.

LPN Consolidation at Packing