Physically Installing the Clock

Before you mount the WB5500 Series Clock, you must find an appropriate physical location. To ensure the clock functions properly, mount the clock in these conditions:

  • Indoors, away from harsh environment conditions.
  • On a flat surface wall.
  • In ambient temperature in the 32° to 140° F (0°C to 60°C) range.
  • In an area with 95% relative non-condensing humidity.

You connect the cables through the access opening at the back of the clock reader, or alternatively from the cable access opening at the bottom of the clock reader.

To mount the WB5500 clock reader:

  1. Mark drill holes with the upper holes 4.0 ft (1.2m) from the floor using the wall mounting kit as a template.

  2. Drill holes into the wall for the screws. Use screw anchors if necessary.

  3. Mount the wall mounting plate with four screws.

  4. Insert the clock reader back plate slots into the wall mounting kit top hooks and lower.
  5. Attach the clock reader back plate to the bottom of the wall mounting kit with 2 screws

  6. Plug in the Ethernet and power cables as required.
    Note: Clocks with rechargeable batteries are not fully charged at the time of delivery. Charge them fully before using the clock reader.