Installation and configuration overview

The 6000 Series Clock connects with the Clock Server (WBCS), which in turn is connected to the WFM application. Before you can install the 6000 series clock, the WBCS must be installed and connected to the WFM application.

This section provides information on how to install and connect the 6000 series clock to an existing WBCS and the WFM application. You will require the IP address of the machine running the WBCS, to install the clock. See Infor WFM Clock Server Guide.

To install and configure the 6000 series clock, you must complete these high-level tasks:

• Initial Setup: Connecting the Clock to the Network. See Connecting the clock to the network.
• Setting the clock system information. See Setting the clock system information.
• Loading the clock program. See Loading the clock program.
• Configuring the WFM application to work with the clock. See Configuring the WFM application.
• Physically installing the clock. See Physically installing the clock.
• Verifying the connection. See Verifying the connection.