Performing Diagnostics

In the clock's test mode, you can initiate several diagnostics tests which confirm the proper working condition of the keypad, badge reader, and fingerprint scanner (if installed).

To enter test mode:

  1. Press the Setup Mode (or Test Setup Diagnostics) function button.
  2. Press the Test Mode function button.

    This message is displayed: Test Mode Reader Test

  3. Press the Prev and Next function buttons to cycle through the types of tests you can run. These options are displayed:
    • Reader Test, tests the clock's badge or card reader, if one is installed.
    • Biometric Test, tests the clock's fingerprint scanner, if one is installed.
    • Keypad Test, tests the clock's numeric keypad.
    • DIDO Test 1, tests the first DI/DO port.
    • DIDO Test 2, tests the second DI/DO port.
    • Exit, exits test mode.
  4. Press the E button when the desired option is displayed and follow the prompts.

    You can press the Prev or Next function buttons to cycle to another type of information and press the E button to make another selection.

  5. Select the Exit option and press the E button when finished.

    You can press the Prev or Next function buttons to cycle to another type of information and press the E button to make another selection.

  6. Press the Exit function button.

    A message is displayed stating that you have asked for a re-boot or have changes that require a re-boot.

  7. Press the OK Re-start function button.

    The clock reboots.