Function Key Label Configuration
A function key label is displayed above a function key. The label
describes the action associated with that function key. Labels can be six to
ten characters long and use one or two lines. Use
\n
for line breaks.
The number of characters that you can use on the label varies depending
upon the size of the characters that you use. For example, an upper case
M
takes more space on the display than a lower case
i
. If your label uses mostly large characters, then the
space on the label limits you to fewer characters.
The labels for clock punches are:
Key | Sample Value | Description |
---|---|---|
DEPARTMENT_CHANGE | Dept | Change departments |
DOCKET_CHANGE | Docket | Change docket |
JOB_CHANGE | Job | Change job |
PROJECT_CHANGE | Project | Change project |
TIMECODE_CHANGE | TCODE | Change time code |
MEAL_BREAK_ON | MEAL\nON | Start meal break |
MEAL_BREAK_OFF | MEAL\nOFF | End meal break |
The labels for supervisor mode are:
Key | Sample Value | Description |
---|---|---|
SUPERVISOR_MODE | SUPER | Enter Supervisor mode |
FINGERPRINT_ENROLL | ENROLL | Enroll biometric template for employee |
The labels listed earlier in this chapter for clock punches are also available for supervisor mode. For example, the label for DEPARTMENT_CHANGE can be used to allow a supervisor to make a department change punch for an employee.
Press the MENU key and select F3 (Admin.) on the keypad to access System Configuration. The labels for the Credentials page are:
Key | Sample Value | Description |
---|---|---|
LOGIN | Login | Log in to the System Menu |
LOGIN_CANCEL | Cancel | Cancel log in to the System Menu |
The labels for setting the clock IP Address through the System Configuration page are:
Key | Sample Value | Description |
---|---|---|
DYNAMIC_IP_CHANGE | Enable | Confirm change to DHCP |
STATIC_IP_CHANGE | Update | Confirm values for Static IP |
IP_CANCEL | Cancel | Cancel IP change operation |