The WB5500 Series Clock keypad layout is similar to
a calculator with extra function buttons (such as
F1 and
F2) along the right and left
side which are used to perform clock punches. These buttons can be configured
so that they perform any clock punch. For example, you might use the
F3 button to perform job
change punches or department change punches.
The instructions in this document refer to the
buttons by name, such as the Punch In button, not the button’s label on the
keypad, such as
F1 or
F3. For information on how
the punch buttons are labeled on your WB5500 Series Clock, see the Button
Legend, included with the WB5500 Series Clock. This template can be filled in
with the punch buttons and their labels.
Aside from the function buttons, you also need these buttons:
Button
|
Description
|
|
Delete or clear button
This button deletes the last number that you have specified.
If you make a mistake specifying your ID, press the clear button to delete the
incorrect ID numbers.
|
|
Enter button
Press
Enter when you have
finished specifying your ID or to select a menu item.
|
|
ESC button
The
ESC button is used
to exit menus and cancel punches.
For example, if you press the wrong
button and start to punch out instead of punch in, press the
ESC button to
cancel the punch.
|
|
Up and down buttons
The up and down buttons are used to scroll up and down.
|