Configuring the WB5500 to use a proxy
To configure the WB5500 to use a proxy:
- Ensure the proxy setup screens are enabled and reboot the WB5500.
-
When the
Enter PIN to start TCP/IP Configuration message is
displayed, specify the clock’s PIN number and press the
Enter button. (The
default PIN is 1234.)
The clock’s setup screens are displayed.
- Follow the setup screens, entering the appropriate information, until Select Proxy Type is displayed.
-
Using the green and red buttons, scroll through the proxy types.
You can select NONE, HTTP, HTTPS, or SOCKS. Press the
Enter button when your selection is displayed.
- If you select NONE, the WB5500 does not use a proxy server and the proxy setup screens are not displayed.
- If you select HTTP, HTTPS, or SOCKS, this message is displayed:
Proxy Address
-
Specify the proxy server’s IP address, using extra zeros for
any octet that is less than three digits. Press the
Enter button when
finished.
Proxy Port is displayed.
- Specify the port number. Press the Enter button when finished.