Chart parameters

Field	Name	Default	Description
rv_chart_export_size	Chart Export Size	600:400	The size of the chart image, in pixels, when exporting the plansheet to PDF or Excel. The embedded chart is a static image and cannot be edited, after export. Specified as two numbers in the format <width>:<height>. If not specified and a plansheet with chart data is exported, the default value of 600:400 is considered.
rv_chart_number	Chart Type	0	The type of chart displayed below the pivot area. 0 or not defined = No Chart. 1 = Column chart (vertical bars) 2 = Line chart 3 = Pie chart 4 = Area chart 5 = Bar chart (horizontal bars) 6 = Map (heat) chart 7 = Gauge chart 8 = Funnel chart 9 = Map (co-ordinate) chart You can override these values for a specific property, using the chart number property in the rv_property_format parameter.
rv_chart_rows	Chart Rows	TRUE	Indicates if the chart is based on rows or columns; TRUE= chart is based on data from the elements used to create the left dimensions (rows), FALSE = chart is based on data from the elements used to create the top dimensions (columns) . When not defined, Default = TRUE. When charting rows, each combination on the left dimension is a series in the chart, either a separate bar, line, area, or a separate slice, or a stacked section. Each combination of elements on the top dimension creates categories on the X-Axis. When the chart row = FALSE, this is reverted and each combination on the top dimension is a series in the chart, with the elements on the left representing the X-Axis categories.
rv_fit_panel	Fit to Panel	TRUE	Used to determine if the chart must fit the available panel width (=TRUE), or use the default sizing, with optional scrollbars; to view the axes categories (=FALSE). Not applicable where chart type = 3, 7 or 8 (Pie, Chart, or Gauge). Fit to panel is always true (rv_fit_panel is ignored), when displaying a chart in 3D.
rv_legend_position	Legend Position	1	Indicates the position of the chart legend (key) in relation to the chart area. 0 = None 1 = Left 2 = Right 3 = Top 4 = Bottom 5 = Data Label (Only applicable when rv_chart_number = 3 (Pie chart) and 8 (Funnel). The data is displayed on chart and not a legend. When not defined, Default = 1 (Left).
rv_pivot_hide	Hide Pivot	FALSE	Used to determine if the pivot table area must be hidden (=TRUE) and only the chart area is displayed or if the pivot area must also be displayed (=FALSE). Only applicable if rv_chart_number > 0, otherwise the pivot area is always displayed. When not defined, Default = FALSE.
rv_pivot_size	Pivot Size	None	Indicates the size of the pivot table area (in pixels) in the current panel and the remaining area in which the chart is displayed. Applicable if a chart is displayed (rv_chart_number > 0), otherwise the pivot table is not drawn in the panel area. If rv_pivot_size is not defined, the space is allotted equally between the pivot and chart.
rv_stacked_type	Stacked Type	None	Indicates if the series on the chart are separate (None), stacked, or a stacked percentage up to 100%. 0 = None 1= Stacked 2 = Percentage The parameter can be used with the chart type to generate stacked or 100% stacked versions of all the chart types. However, this parameter is ignored if the chart type is a Pie chart. Default = 0 (None); when not defined, a separate series is displayed.
rv_x_label_Type	X-Axis Label Type	1	Used to determine the type of X-Axis labels to be displayed for the chart. 0 = None 1 = Normal 2 = Grouped When not defined, Default = 1.
rv_y_label_hide	Hide Y-Axis Labels	FALSE	Used to determine if the Y-Axis labels must be displayed or not on the chart (=TRUE), displayed (=FALSE). When not defined, Default = FALSE.
rv_map_hide_nullareas	Hide Zero resources	FALSE	Indicates whether a resource with zero values must be hidden from the map (TRUE), or always displayed irrespective of value. The default value is FALSE. This is only applicable when rv_chart_number is set to 6 (Map (Heat) chart).
rv_single_tooltip	Display single Tooltip	TRUE	Used to determine if the tooltips for the charts must be displayed as a single point tooltip or a shared tooltip, for all elements on the axis. When not defined, Default = TRUE Only applicable when rv_chart_number = 1,2,4,5. For other charts, only single tooltip is displayed.
rv_pie_style	Pie chart style	0	Indicates the pie chart style such as standard pie, donut pie chart or semicircle donut pie chart. 0 = standard pie chart 1 = donut pie chart 2 = semicircle donut pie chart When not defined, Default = 0. Only applicable when rv_chart_number = 3.
rv_chart_3d	Display chart in 3D	FALSE	Indicates if the applicable charts must be displayed in 3D.When not defined, Default = FALSE. Only applicable for rv_chart_number 1, 3, 5. If rv_chart_number = 3 (pie chart), the 3D style is only applicable when the rv_pie_style = 0 or 1. If rv_pie_style = 2, rv_chart_3d is not considered. When displaying a 3D chart, fit to panel is assumed TRUE (any value within rv_fit_panel is ignored).
rv_gauge_style	Gauge Chart Style	0	Indicates the gauge chart style (Solid Gauge or Angular Gauge). If not defined, 0 = Solid, Gauge 1 = Angular Gauge, and Default = 0 (Solid). Only applicable when rv_chart_number = 7 (gauge).

rv_chart_export_size

Chart Export Size

600:400

The size of the chart image, in pixels, when exporting the plansheet to PDF or Excel. The embedded chart is a static image and cannot be edited, after export.

Specified as two numbers in the format <width>:<height>. If not specified and a plansheet with chart data is exported, the default value of 600:400 is considered.

rv_chart_number

Chart Type

0

The type of chart displayed below the pivot area.

0 or not defined = No Chart.

1 = Column chart (vertical bars)

2 = Line chart

3 = Pie chart

4 = Area chart

5 = Bar chart (horizontal bars)

6 = Map (heat) chart

7 = Gauge chart

8 = Funnel chart

9 = Map (co-ordinate) chart

You can override these values for a specific property, using the chart number property in the rv_property_format parameter.

rv_chart_rows

Chart Rows

TRUE

Indicates if the chart is based on rows or columns; TRUE= chart is based on data from the elements used to create the left dimensions (rows), FALSE = chart is based on data from the elements used to create the top dimensions (columns) . When not defined, Default = TRUE. When charting rows, each combination on the left dimension is a series in the chart, either a separate bar, line, area, or a separate slice, or a stacked section. Each combination of elements on the top dimension creates categories on the X-Axis. When the chart row = FALSE, this is reverted and each combination on the top dimension is a series in the chart, with the elements on the left representing the X-Axis categories.

rv_fit_panel

Fit to Panel

TRUE

Used to determine if the chart must fit the available panel width (=TRUE), or use the default sizing, with optional scrollbars; to view the axes categories (=FALSE). Not applicable where chart type = 3, 7 or 8 (Pie, Chart, or Gauge). Fit to panel is always true (rv_fit_panel is ignored), when displaying a chart in 3D.

rv_legend_position

Legend Position

1

Indicates the position of the chart legend (key) in relation to the chart area.

0 = None

1 = Left

2 = Right

3 = Top

4 = Bottom

5 = Data Label (Only applicable when rv_chart_number = 3 (Pie chart) and 8 (Funnel). The data is displayed on chart and not a legend.

When not defined, Default = 1 (Left).

rv_pivot_hide

Hide Pivot

FALSE

Used to determine if the pivot table area must be hidden (=TRUE) and only the chart area is displayed or if the pivot area must also be displayed (=FALSE). Only applicable if rv_chart_number > 0, otherwise the pivot area is always displayed. When not defined, Default = FALSE.

rv_pivot_size

Pivot Size

None

Indicates the size of the pivot table area (in pixels) in the current panel and the remaining area in which the chart is displayed. Applicable if a chart is displayed (rv_chart_number > 0), otherwise the pivot table is not drawn in the panel area. If rv_pivot_size is not defined, the space is allotted equally between the pivot and chart.

rv_stacked_type

Stacked Type

None

Indicates if the series on the chart are separate (None), stacked, or a stacked percentage up to 100%.

0 = None
1= Stacked
2 = Percentage

The parameter can be used with the chart type to generate stacked or 100% stacked versions of all the chart types. However, this parameter is ignored if the chart type is a Pie chart. Default = 0 (None); when not defined, a separate series is displayed.

rv_x_label_Type

X-Axis Label Type

1

Used to determine the type of X-Axis labels to be displayed for the chart.

0 = None
1 = Normal
2 = Grouped

When not defined, Default = 1.

rv_y_label_hide

Hide Y-Axis Labels

FALSE

Used to determine if the Y-Axis labels must be displayed or not on the chart (=TRUE), displayed (=FALSE). When not defined, Default = FALSE.

rv_map_hide_nullareas

Hide Zero resources

FALSE

Indicates whether a resource with zero values must be hidden from the map (TRUE), or always displayed irrespective of value. The default value is FALSE. This is only applicable when rv_chart_number is set to 6 (Map (Heat) chart).

rv_single_tooltip

Display single Tooltip

TRUE

Used to determine if the tooltips for the charts must be displayed as a single point tooltip or a shared tooltip, for all elements on the axis. When not defined, Default = TRUE

Only applicable when rv_chart_number = 1,2,4,5. For other charts, only single tooltip is displayed.

rv_pie_style

Pie chart style

0

Indicates the pie chart style such as standard pie, donut pie chart or semicircle donut pie chart.

0 = standard pie chart
1 = donut pie chart
2 = semicircle donut pie chart

When not defined, Default = 0. Only applicable when rv_chart_number = 3.

rv_chart_3d

Display chart in 3D

FALSE

Indicates if the applicable charts must be displayed in 3D.When not defined, Default = FALSE.

Only applicable for rv_chart_number 1, 3, 5.

If rv_chart_number = 3 (pie chart), the 3D style is only applicable when the rv_pie_style = 0 or 1. If rv_pie_style = 2, rv_chart_3d is not considered. When displaying a 3D chart, fit to panel is assumed TRUE (any value within rv_fit_panel is ignored).

rv_gauge_style

Gauge Chart Style

0

Indicates the gauge chart style (Solid Gauge or Angular Gauge). If not defined, 0 = Solid, Gauge 1 = Angular Gauge, and Default = 0 (Solid). Only applicable when rv_chart_number = 7 (gauge).