Catch Weight and Cost Unit of Measure Settings

Indicates whether two-step put-away is activated:

'0=No'

'1=Yes'

'2=Staged'. IE. located at a receiving area, waiting to be directed to the correct put-away location during put-away confirmation.

This activation occurs in the stock zone, and in the goods receiving method or order type. For purchase orders, the activation is in goods receiving method. For manufacturing orders and DO/RO orders, it occurs in the respective order types.

Must be active in both the stock zone and the goods receiving method/order type for two-step put-away to commence.

Indicates if catch weight/physical inventory weight should be calculated based on the existing MITLOC record or entered manually. Alternatives:

0 = Catch weight calculated based upon existing MITLOC record.

1 = Catch weight must be entered when quantity is changed.

(CRS025/E)

(MMS309/E)

(CRS025/E)

(MMS309/E)

Select fields for (MMS001/G)

Activate 'Loc-based CW'

Select fields for (MMS001/H)

Activate output fields for cost units of measure

Select fields for (MMS001/H)

Activate output fields for new units of measure

Select fields for (MMS001/H)

Activate output fields for new units of measure

Select fields for (MMS002/H)

Indicates the on-hand balance in Catch weight U/M

Select fields for (MMS002/H)

Indicates the rejected on-hand balance in Catch weight U/M

Select fields for (MMS002/H)

Indicates the on-hand balance under inspection in Catch weight U/M

Select fields for (MMS003/E)

Activate output fields for Catch Weight On-hand balance accumulators

Select fields for (MMS003/E)

Indicates if the value for a specific transaction should be calculated based on the actual weight multiplied by the cost per weight. All stock transactions and internal accounting transactions will be created based on the actual weight and a cost expressed per weight unit. Internal accounting and general ledger transactions will continue to hold a quantity but this will be the actual weight-based quantity and not the quantity in the basic unit of measure.

Alternatives:

0 = No catch weight cost

1 = Catch weight cost

2 = Catch weight cost by facility

If alternative 1 is selected, the standard weight of the product is the same across the company and the standard cost is calculated based on the weight conversion factor in (MMS015/E). If alternative 2 is selected, the standard weight of the product varies from facility to facility and the standard cost is calculated based on the weight conversion factor in (MMS003/E).

Prerequisites for the catch weight cost are:

Value in the (MNS905/E) 'Industry' field must be 'Fob-Food'.

Value in the (MMS001/G) 'Active or catch weight item' field must be 2, 3, or 4

Value in the 'Standard U/M – Catch weight' field must be equal to that in the 'Standard U/M – Cost' field in (MMS015/E)

The field indicates if the value for a specific transaction should be calculated based on the actual weight multiplied by the cost per weight. All stock transactions and internal accounting transactions will be created based on the actual weight and a cost expressed per weight unit. Internal accounting and General Ledger transactions will continue to hold a quantity but this will be the actual weight-based quantity and not the quantity in the basic unit of measure.

Alternatives:

0 = No catch weight cost

1 = Catch weight cost. The standard weight of the product is the same across the company and the standard cost is calculated based on the weight conversion factor in (MMS015/E).

2 = Catch weight cost by facility. The standard weight of the product varies from facility to facility and the standard cost is calculated based on the weight conversion factor in (MMS003/E).

Prerequisites for the catch weight cost are:

Value in the (MNS095/E) Industry field must be 'FoB-Food'.

Value in the (MMS001/G) active or catch weight item field must be 2, 3, or 4.

Value in the Standard U/M – Catch weight field must be equal to that in the Standard U/M – Cost field in (MMS015/E).

The field indicates the catch weight U/M.

The U/M in which the catch weight of the item is saved. For Food & Beverage customers who use location based catch weight, an alternative U/M for catch weight can be created.

Catch Weight OHB on trans date

Catch Weight OHB on reg. date

Select these fields for stock:

Catch Weight OHB on trans date – MTCWTT

Catch Weight OHB on reg. date - MTCWTQ

Costing unit of measure

Costing quantity for transaction

Select these fields for costing:

Costing unit of measure – MMCPUN

Costing quantity for transaction- MTCSQT

The following fields are available to support catch weight:

• MMCAWP - Location based Catch weight
• MMCWUN – Catch weight U/M
• MMCPUN – Costing U/M
• MBQUCW – Catch weight under insp per warehouse
• MBRJCW – Rejected catch weight per warehouse
• MBSTCW – Catch weight on hand per warehouse
• M9QUCW – Catch weight under inspection per facility
• M9RJCW – Rejected catch weight per facility
• M9STCW – Catch weight on hand per facility

Indicates how catch weight is displayed in 'Picking List. Report Lines' (MWS422).

If Propose Weight = 0:

The catch weight field is open in (MWS422/B) and proposed CW=allocated weight. This reflects the weight at the time for allocation and can be changed.

If Propose Weight = 1:

The catch weight field is closed in (MWS422/B). Calculated and issued CW = Avg CW per unit on balance ID * issued quantity. This reflects the actual weight recorded in MITLOC (MWS068).

Deactivated check box: If not populated, the catch weight field is opened for editing in (MWS445/B), but not proposed.

Activated check box: If populated, the catch weight field is opened for editing in (MWS445/B), and the weight is displayed reflecting the actual weight recorded in MITLOC (MWS068).

Indicates whether the catch weight from pick list reporting (MWS422) should be proposed as the default during DO receipt.

If the catch weight should be proposed as default (alternatives 1 and 2 below), the fields on the (MWS440/A) panel must be entered based on the receipt of a single line.

0 = No. Not proposed as default.

1 = Yes. Propose catch weight as default, but do not show the A panel again unless there is an error.

2 = Yes. Propose catch weight as default, and redisplay the A panel so that the retrieved catch weight is displayed.

This reflects the actual weight recorded in MITLOC (MWS068).