Settings in the Application Settings panel

Users with sufficient rights to the Application Settings panel can copy many application settings to different user groups. These users can also revise the default values of many application settings. The table in this section shows how these settings are used in the application and the settings that users can revise or copy.

  • The Editing allowed column indicates whether or not users can edit the application setting.

    If the value is Yes, then users with sufficient access rights to the Application settings panel can edit the setting.

  • The Copy allowed column indicates whether or not users can copy the application setting.

    If the value is Yes, then users can copy the setting to other valid user groups.

Configuration entry Default value Description Editing allowed Copy allowed
.CONFIG:LOG_LEVELS Error

The values selected in this setting determine which message types are written to the system log.

The valid value for each severity level is On (1) or Off (0). One message type corresponds to each severity level:

  • First severity level: informational
  • Second severity level: warning
  • Third severity level: error
  • Fourth severity level: trace

To enable or disable a log message type, click Edit and select or clear the check box for this log message type. You cannot disable the Error message type.

Yes No
.CONFIG:MI_TAB_RECORDS 100

This setting defines the maximum number of records returned and displayed from an M3 API transaction, when called from a customized tab.

See API Interface Configuration

Yes No
.CONFIG:onHouseKeeping_CleanDataqueue Enabled If this setting is enabled, then the status of expired transactions that are currently in the data queue is changed from Active to Rejected after ten days. Yes No
.CONFIG:onHouseKeeping_CleanSysLog Enabled If this setting is enabled, then entries are deleted from the SSystemLog table. Yes No
.CONFIG:ONHOUSEKEEPING_DLTDATAQUEUE1000 Enabled This setting is used to enable or disable the continuous deletion of accepted transactions from the data queue after a certain number of days, which is defined in this setting:

.CONFIG:ONHOUSEKEEPING_STS1000TRNSDAYS

Yes No
.CONFIG:ONHOUSEKEEPING_DLTDATAQUEUE2000 Enabled This setting is used to enable or disable the continuous deletion of rejected transactions from the data queue after a certain number of days, which is defined in this setting:

.CONFIG:ONHOUSEKEEPING_STS2000TRNSDAYS

Yes No
.CONFIG:ONHOUSEKEEPING_STS1000TRNSDAYS 15 This setting defines the number of days before deletion of accepted transactions. Yes No
.CONFIG:ONHOUSEKEEPING_STS2000TRNSDAYS 100 This setting defines the number of days before deletion of rejected transactions. Yes No
.CONFIG:onHouseKeeping_SysLogDays 20 This setting defines the number of days to keep log entries before deletion. Yes No
GRAPH:DualPath Disabled If this setting is enabled and if customer returns exist, then the graph in the Trace Step diagram shows double trace routes. You can visualize the incoming and outgoing stock movements for customer returns in the same warehouse. Yes Yes
GRAPH:IncludeDataGrid Disabled If this setting is enabled, two buttons, Diagram, and List appear in the Trace Step diagram. You can change the layout of the Trace Step diagram between a diagram view and a list view. Yes Yes
.GRAPH:MAXCHILD 30 This setting defines the maximum number of children that can be displayed by a parent batch on the Trace Step diagram. Yes No
.GRAPH:MAXLEVEL 15 This setting defines the maximum number of levels that can be displayed by a selected batch on the Trace Step diagram. Yes No
.GRAPH:MAXOBJECTS 1500 This setting defines the maximum number of trace objects that can be displayed on a graph. Yes No
.INTERFACE:ADMIN_BOOKMARK Disabled This setting is used to enable or disable the Bookmark customization (Add link field) inside the Panel Settings function. Yes Yes
.INTERFACE:ADMIN_CONFIG Enabled, only for the GLTADMIN user group This setting is used to enable or disable the Application Settings function in the Systems Administration menu.

This enables you to manage the M3 Graphical Lot Tracker application settings.

To make changes to settings, the user can click the Edit button. If this setting is disabled, then the list is hidden to the user.

See Application Settings panel

.
Yes Yes
.INTERFACE:ADMIN_CONFIG_ADD Enabled, only for the GLTADMIN user group This setting is used in conjunction with the .INTERFACE:ADMIN_CONFIG setting. If this setting is enabled, then, to copy application settings to other user groups, the user can click the Copy button. If the setting is disabled, then the copy function is not allowed. Yes Yes
.INTERFACE:ADMIN_JOBSCHEDULE Enabled, only for the GLTADMIN user group This setting is used to enable or disable the Schedule Daily Processing function and Schedule Processing Transaction Data function in the System Administration.

This enables you to modify, enable and disable the data transfer schedules.

See Schedule Daily Processing panel and Schedule Processing Transaction Data panel

Yes Yes
.INTERFACE:ADMIN_LOCALIZATION Enabled, only for the GLTADMIN user group This setting is used to enable or disable the Application Localization function in the System Administration.

This enables you to manage language settings, for example, customizing list headings, labels, and user messages.

See Application Localization panel

Yes Yes
.INTERFACE:ADMIN_MI Disabled

This setting is used to enable or disable the API Interface Configuration function in the System Administration. This enables you to create customized tabs on the Trace panel.

See API Interface Configuration
Yes Yes
.INTERFACE:ADMIN_OTHERLANGUAGE Disabled This setting is used to enable or disable the language creation function. Yes No
.INTERFACE:ADMIN_PANEL_CONFIG Enabled, only for the GLTADMIN user group

This setting is used to enable or disable the Panel Settings function in the System Administration.

This enables you to configure the user interface.

To make changes to panel settings, the user can click the Edit button. If this setting is disabled, then the list is hidden to the user. See Panel Settings panel
Yes Yes
.INTERFACE:ADMIN_PANEL_CONFIG_ADD Enabled, only for the GLTADMIN user group This setting is used in conjunction with the .INTERFACE:ADMIN_PANEL_CONFIG setting. If this setting is enabled, then, to copy panel settings to other user groups, the user can click the Copy button. If the setting is disabled, then the copy function is not allowed. Yes Yes
.INTERFACE:ADMIN_PANEL_CONFIG_DELETE Enabled, only for the GLTADMIN user group This setting is used in conjunction with the .INTERFACE:ADMIN_PANEL_CONFIG setting. If this setting is enabled, then, to delete panel settings for user groups, the user can click the Delete button. If the setting is disabled, then the delete function is not allowed. Yes Yes
.INTERFACE:ADMIN_REIMPORT_PARTS Enabled, only for the GLTADMIN user group

This setting is used to enable or disable the Update Trace Line Partially function in the System Administration. This enables you to run limited ad hoc data transfer from the source database.

See Update Trace Line Partially panel

Yes Yes
.INTERFACE:ADMIN_RELOADTRACELINE Enabled, only for the GLTADMIN user group This setting is used to enable or disable the Update Trace Line function in the System Administration. This enables you to run ad hoc data transfer from the source database.

See Update Trace Line panel

Yes Yes
.INTERFACE:ADMIN_SYSTEMLOG Enabled, only for the GLTADMIN user group

This setting is used to enable or disable the System Log function in the System Administration.

This enables you to review system log entries in the trace line database.

See System Log panel
Yes Yes
.INTERFACE:BULK_REJECTED Disabled

This setting is used to enable or disable the Rejected Transactions Bulk Accept function in the System Administration.

This enables you to accept a large number of rejected transactions in bulk.

SeeRejected Transactions Bulk Accept

Yes Yes
.INTERFACE:EXPORT_FORMAT CSV This setting defines the format of the file created when exporting data to a spreadsheet. By default, this setting is set to CSV. You can also specify XLS. Yes Yes
.INTERFACE:NAVIGATE_ALLNEXT Enabled If this setting is enabled, then the Trace Step diagram shows the All Next button. If the user clicks this button, then the Trace Step diagram shows the highlighted trace step and all the subsequent steps. Yes Yes
.INTERFACE:NAVIGATE_ALLPREV Enabled If this setting is enabled, then the Group panel shows the All Previous button. If the user clicks this button, then a list shows all the previous objects in the traces represented by the group. Yes Yes
.INTERFACE:NAVIGATE_ALLPREVIOUS Enabled If this setting is enabled, then the Trace Step diagram shows the All Previous button. If the user clicks this button, then the Trace Step diagram shows the highlighted trace step and all the preceding steps. Yes Yes
.INTERFACE:NAVIGATE_COMMONALLPREV Enabled If this setting is enabled, then the Group panel shows the Common All Previous button. If the user clicks this button, then a list shows all the previous objects common to all lines in the traces represented by the group. Yes Yes
.INTERFACE:NAVIGATE_COMMONFIRST Enabled If this setting is enabled, then the Group panel shows the Common First button. If the user clicks this button, then a list shows the first objects common to all lines in the traces represented by the group. Yes Yes
.INTERFACE:NAVIGATE_COMMONLAST Enabled If this setting is enabled, then the Group panel shows the Common Last button. If the user clicks this button, then a list shows the last objects common to all lines in the traces represented by the group. Yes Yes
.INTERFACE:NAVIGATE_FILTER Enabled If this setting is enabled, then the Trace panel shows the Filter button. If the user clicks this button, then the list of trace objects is restricted based on the value selected in the filter. Yes Yes
.INTERFACE:NAVIGATE_FIRST Enabled If this setting is enabled, then the Group panel shows the First button. If the user clicks this button, then a list shows the first objects in the traces represented by the group. Yes Yes
.INTERFACE:NAVIGATE_LAST Enabled If this setting is enabled, then the Trace and Group panels show the Last button.

If the user clicks this button in the Trace panel, then a list shows the last objects in the trace line.

If the user clicks this button in the Group panel, then a list shows the last objects in the traces represented by the group.

Yes Yes
.INTERFACE:NAVIGATE_NEW Enabled If this setting is enabled, then the Groups button is displayed in the Trace panel. If the user clicks this button, then the drop-down menu shows the existing groups, and new groups can be created using the New Group option. Yes Yes
.INTERFACE:NAVIGATE_NEXT Enabled If this setting is enabled, then the Trace panel shows the Next button. If the user clicks this button, then a list shows the next objects in the trace line. Yes Yes
.INTERFACE:NAVIGATE_ORIGIN Enabled If this setting is enabled, then the Trace panel shows the First button. If the user clicks this button, then a list shows the first objects in the trace line. Yes Yes
.INTERFACE:NAVIGATE_OVERVIEW Enabled If this setting is enabled, then the Trace Step diagram shows the Overview button. If the user clicks this button, then the Trace Step diagram shows again the Trace Step diagram for the highlighted trace step. Yes Yes
.INTERFACE:NAVIGATE_PREVIOUS Enabled If this setting is enabled, then the Trace panel shows the Previous button. If the user clicks this button, then a list shows the previous objects in the trace line. Yes Yes
.INTERFACE:NAVIGATE_REPORT Enabled If this setting is enabled, then the user can use the Reports button in the Trace and Group panels, and select reports from the Reports menu in the Application menu pane. Yes Yes
.INTERFACE:RECLASS_REASON_REQUIRED Disabled If this setting is enabled, then the user must select a transaction reason before reclassifying an item or lot. Yes Yes
.INTERFACE:SEARCH_ATTRIBUTE Enabled This setting determines whether the Attribute search page is available to the user. Yes Yes
.INTERFACE:SEARCH_ATTRIBUTE_COUNT 5 This setting defines the number of attributes on the Attributes search page. This number can be from 1 to 10. Yes Yes
.INTERFACE:SEARCH_DISTRIBUTION Enabled This setting determines whether the Distribution search page is available to the user. Yes Yes
.INTERFACE:SEARCH_GENERAL Enabled This setting determines whether the Quick search option is available to the user. Yes Yes
.INTERFACE:SEARCH_GROUP_DETAIL_COUNT 50 This setting is used to limit the number of items allowed in a group. Yes No
.INTERFACE:SEARCH_GROUPHOLD Enabled This setting defines whether the Group Hold Report search page is available to the user. Yes Yes
.INTERFACE:SEARCH_LOT Enabled This setting defines whether the Lot search page is available to the user. Yes Yes
.INTERFACE:SEARCH_MOAUDIT Enabled This setting defines whether the Manufacture Audit Report search page is available to the user. Yes Yes
.INTERFACE:SEARCH_PRODUCTION Enabled This setting defines whether the Production search page is available to the user. Yes Yes
.INTERFACE:SEARCH_PURCHASE Enabled This setting defines whether the Purchase search page is available to the user. Yes Yes
.INTERFACE:SEARCH_REJECTED Enabled This setting defines whether the Rejected Transactions Report search page is available to the user. Yes Yes
.INTERFACE:SEARCH_SALE Enabled This setting defines whether the Sale search page is available to the user. Yes Yes
.INTERFACE:SEARCH_STOCK Enabled This setting defines whether the Stock search page is available to the user. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_[…] Enabled These settings are used to enable and disable tabs for trace step details. An example is the Location Content tab for the Blend trace items.
.INTERFACE:TABS_DataDetails_DBV_Blend_1 Enabled If this setting is enabled, then the Location Content tab and any related information for the Blend transaction are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Blend_2 Enabled If this setting is enabled, then the Location Cleaning tab and any related information for the Blend transaction are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Blend_3 Enabled If this setting is enabled, then the Quality Inspection tab and any related information for the Blend transaction are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Customer_1 Enabled If this setting is enabled, then the All lots this order line tab and any related information for the Sale search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Customer_2 Enabled If this setting is enabled, then the Sublot Controlled tab and any related information for the Sale search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Customer_3 Enabled If this setting is enabled, then the Quality Inspection tab and any related information for the Sale search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Distribute_1 Enabled If this setting is enabled, then the Distributed lots tab and any related information for the Distribution search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Distribute_2 Enabled If this setting is enabled, then the Sublot Controlled tab and any related information for the Distribution search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Distribute_3 Enabled If this setting is enabled, then the Quality Inspection tab and any related information for the Distribution search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Manufacture_1 Enabled If this setting is enabled, then the Operations tab and any related information for the Production search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Manufacture_2 Enabled If this setting is enabled, then the Attributes tab and any related information for the Production search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Manufacture_3 Enabled If this setting is enabled, then the Quality Inspection tab and any related information for the Production search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Manufacture_4 Enabled If this setting is enabled, then the Co-, By- and End Products tab and any related information for the Production search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Manufacture_5 Enabled If this setting is enabled, then the Manufactured Lots tab and any related information for the Production search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Manufacture_6 Enabled If this setting is enabled, then the Sublot Controlled tab and any related information for the Production search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Purchase_1 Enabled If this setting is enabled, then the Attributes tab and any related information for the Purchase search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Purchase_2 Enabled If this setting is enabled, then the Quality Inspection tab and any related information for the Purchase search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Purchase_3 Enabled If this setting is enabled, then the Grower Quality Inspection tab and any related information for the Purchase search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Purchase_4 Enabled If this setting is enabled, then the Base Origin tab and any related information for the Purchase search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Purchase_5 Enabled If this setting is enabled, then the Sublot Controlled tab and any related information for the Purchase search are displayed. Yes Yes
.INTERFACE:TABS_DataDetails_DBV_Purchase_6 Enabled If this setting is enabled, then the Deliveries tab and any related information for the Purchase search are displayed. Yes Yes
.INTERFACE:TABS_Blend_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Blend transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Blend_Lot_number_details Disabled

If this setting is enabled, then the Lot Number Details tab for Blend transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Customer_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Customer transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Customer_Lot_Number_details Disabled

If this setting is enabled, then the Lot Number Detail tab for Customer transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Distribute_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Distribute transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Distribute_Lot_numbers_details Disabled

If this setting is enabled, then the Lot Number Detail tab for Distribute transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Manufacture_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Manufacture transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Manufacture_Lot_number_details Disabled

If this setting is enabled, then the Lot Number Detail tab for Manufacture transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Purchase_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Purchase transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Purchase_Lot_number_details Disabled

If this setting is enabled, then the Lot Number Detail tab for Purchase transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Reclass_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Reclass transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Reclass_Lot_number_details Disabled

If this setting is enabled, then the Lot Number Detail tab for Reclass transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Scrap_Current_inventory Disabled

If this setting is enabled, then the Current Inventory tab for Scrap transactions is displayed.

Source: M3 API

Yes Yes
.INTERFACE:TABS_Scrap_Lot_number_details Disabled

If this setting is enabled, then the Lot Number Detail tab for Scrap transactions is displayed.

Source: M3 API

Yes Yes
.M3API:API Disabled If this setting is enabled, then current stock can be reclassified in M3 Business Engine using the Group Hold Report or the Stock reports. Yes Yes
.M3API:E0PA GLT This setting represents the value of the Partner setting from the M3 Business Engine program ‘Stock Msg Partner. Open’ (MMS865). The value of the Partner field is used in the M3 Business Engine Reclassification API. Yes No
.M3API:PRLF .EXE This setting defines the M3 Business Engine API processing option. No
.M3API:REFRESHSTOCK Disabled If this setting is enabled, then the refresh function is available in the Stock reports per Balance ID. Yes Yes
.M3API:USD1 This setting defines data sent in the user-defined field 1 for the MMS850MI transactions. Yes No
.M3API:USD2 This setting defines data sent in the user-defined field 2 for the MMS850MI transactions. Yes No
.M3API:USD3 This setting defines data sent in the user-defined field 3 for the MMS850MI transactions. Yes No
.M3API:USD4 This setting defines data sent in the user-defined field 4 for the MMS850MI transactions. Yes No
.M3INFORMATION:BOM_Quantity Enabled If this setting is enabled, then the Materials tab on the Production Search page shows all available columns. If this setting is disabled, then only the component item number, the name, and the lot number are displayed. Yes Yes
.M3REPORT:BACKGROUND_REPORT_TIMEOUT If .M3REPORT:USE_BACKGROUND_REPORT is enabled, the value set here is the timeout limit using a unit of measure in seconds. Yes No
.M3REPORT:Customer_Include_Returns Enabled If this setting is enabled, then customer return transactions are included in the Customer List report. Yes Yes
.M3Report:Exclude_Scrap_Calculation Disabled If this setting is enabled, then scrap calculations is excluded from the Shipped Quantity report, the Consumed Quantity report, the Raw Material Content report, and the Compare Raw Material Usage report. Yes Yes
.M3REPORT:Hide_Optional_Material Disabled If this setting is enabled, then materials for which both reserved and reported quantities equal zero are hidden from the Material list tab and the related manufacturing reports. Yes Yes
.M3REPORT:LotAudit_ObjAutorization Enabled If this setting is enabled, then the .M3Sys:ObjAutorization setting is ignored only for the Lot Audit report. Yes Yes
.M3REPORT:MaterialList_Include_All Enabled If this setting is enabled, then by-products are displayed as a product and as a component in the Material List report. If this setting is disabled, then the by-product is displayed only as a component in the report. Yes Yes
.M3REPORT:MOAudit_MaxOrders 1000 This setting defines the maximum number of manufacturing orders that are included in the analysis for the Manufacturing Order Audit report. Yes Yes
.M3REPORT:REPORT_CustomerInfo Enabled If this setting is enabled, then the Customer List report is available to the user. Yes Yes
.M3REPORT:REPORT_LotAudit Enabled If this setting is enabled, then the Lot Audit report is available to the user. Yes Yes
.M3REPORT:REPORT_LOTAUDIT_EXPORT_EXTENDED Enabled If this setting is enabled, the Export extended option is available to the user when exporting the Lot Audit report. Yes Yes
.M3REPORT:REPORT_MaterialList Enabled If this setting is enabled, then the Material List report is available to the user. Yes Yes
.M3REPORT:MaterialList_EXTENDED Disabled If this setting is enabled, additional information about Supplier is published on the Material List report. Yes Yes
.M3REPORT:REPORT_RawMaterial Enabled If this setting is enabled, then the Raw Material Content report is available to the user. Yes Yes
.M3REPORT:REPORT_ReclassifiedItemsLots Enabled If this setting is enabled, then the Reclassified Items/Lots report is available to the user. Yes Yes
.M3REPORT:REPORT_StockReport Enabled If this setting is enabled, then the Stock Products per Balance ID and Stock Components per Balance ID reports are available to the user. Yes Yes
.M3REPORT:REPORT_StockReport_Per_Lot Disabled If this setting is enabled, then the Stock Products per Lot and Stock Components per Lot reports are available to the user. Yes Yes
.M3REPORT:REPORT_SUPPLIER_LIST Enabled If this setting is enabled, then the Supplier List report is available to the user. Yes Yes
.M3REPORT:REPORT_UsedQuantity Enabled If this setting is enabled, then the Consumed Quantity report is available to the user. Yes Yes
.M3REPORT:RMContent_omit_Item_group

Add Item group value to this setting to omit raw and semifinished material from the Raw Material report.

Each setting can hold one or more value and must be specified in this form: item group1,item group2,item group3

Raw materials, or semifinished materials, or both (belonging to specified Item group) are omitted from display, and excluded from the Sum material content calculations.

Yes No
.M3REPORT:RMContent_omit_Item_type

Add Item type value to this setting, to omit raw and semifinished material from the Raw Material report.

Each setting can hold one or more value and must be specified in this form: item type1,item type2,item type3

Raw materials, or semifinished materials, or both (belonging to specified Item type) are omitted from display, and excluded from the Sum material content calculations.

Yes No
.M3REPORT:RMContent_omit_Product_group

Add Product group value to this setting, to omit raw and semifinished material from the Raw Material report.

Each setting can hold one or more value and must be specified in this form: product group1,product group2,product group3.

Raw materials, or semifinished materials, or both (belonging to specified Item group) are omitted from display, and excluded from the Sum material content calculations.

Yes No
.M3REPORT:RMContent_suppress_Item_group

Add Item group value to this setting, to suppress raw and semifinished material on the Raw Material report.

Each setting can hold one or more value and must be specified in this form: item group1,item group2,item group3.

Raw materials, or semifinished materials, or both (belonging to specified Item group) are suppressed from display, but included in the Sum material content calculations.

Yes No
.M3REPORT:RMContent_suppress_Item_type

Add Item type value to this setting, to suppress raw and semifinished material on the Raw Materia report.

Each setting can hold one or more value and must be specified in this form: item type1,item type2,item type3

Raw materials, or semifinished materials, or both (belonging to specified Item typ) are suppressed from display, but included in the Sum material content calculations.

Yes No
.M3REPORT:RMContent_suppress_Product_group

Add Product group value to this setting, to suppress raw and semifinished material on the Raw Material report.

Each setting can hold one or more value and must be specified in this form: product group1,product group2,product group3

Raw materials, or semifinished materials, or both (belonging to specified Product group) are suppressed from display, but included in the Sum material content calculations.

Yes No
.M3REPORT:RMContent_Unit KG This setting defines the unit of measure value used as the base unit or alternate unit in the Raw Material Shipped Quantity and Raw Material Content reports. All raw materials, semifinished products, and end products are converted to this unit. If the catch weight is used, then the unit must represent the defined catch weight unit. Yes No
.M3REPORT:USE_BACKGROUND_REPORT Enabled If this setting is enabled, then Finalized Reports is available to the user. Yes No
.M3SYS:AuthorizationProgram SES400 This setting determines which M3 Business Engine security option is used.

If the value is SES400, then authorization to M3 Graphical Lot Tracker is based on roles associated to the user. The roles become M3 Graphical Lot Tracker user groups in the Application Settings panel.

If the value is SES003, then authorization to M3 Graphical Lot Tracker is based on a functional level. Users are assigned to groups associated to M3 Business Engine functions. These groups become the M3 Graphical Lot Tracker user groups in the Application Settings panel when this option is used.

Yes No
.M3SYS:DaysForOpenMO 30 This setting defines the number of days during which an order remains open for adding trace. This information is used in the analysis for the Manufacturing Order Audit Report. Yes No
.M3SYS:Function_Cat MSH This setting defines the function category for M3 Graphical Lot Tracker user groups. This setting is used in conjunction with the .M3SYS:AuthorizationProgram setting for security through functional authority (SES003). Yes No
.M3SYS:Function_Component_Group GLT This setting defines the function component group for M3 Graphical Lot Tracker user groups. This setting is used in conjunction with the .M3SYS:AuthorizationProgram setting for security through functional authority (SES003). Yes No
.M3SYS:Hide_SSCC_Result Disabled If this setting is enabled, the SSCC number will be excluded from the Sale Search result list. Yes Yes
.M3SYS:Include_Pending_QI Disabled This setting determines whether to include QI Requests with a Request Status of 'Pending' and 'Replaced' on the Trace Panel QI tabs. Yes Yes
.M3Sys:ObjAutorization Disabled If this setting is enabled, then M3 Business Engine object access authority is enabled in M3 Graphical Lot Tracker. Users are associated to user groups in M3 Business Engine and have access only to objects associated to the groups. Examples include specific warehouses and facilities. Yes Yes
.M3SYS:Subcon_OverrideIssueMethod Disabled If this setting is enabled, then the issue method ‘Issue from MO' is overridden for any raw material used for the subcontracted operation. The issue method is transformed into a valid ‘Issue from RO’ transaction, thus preventing M3 Graphical Lot Tracker from rejecting the transaction. Yes No
.M3SYS:Use_SearchTrans_MI Disabled If this setting is enabled, then the M3 Search transactions can be used when creating customized tabs. Yes No