Settings in the Application Settings panel
Users with sufficient rights to the Application settings
The table in this section shows how these settings are used in the application and the settings that users can revise or copy: panel can copy many application settings to different user groups. These users can also revise the default values of many application settings.
- The ‘Editing allowed’ column indicates whether or not users can edit the
application setting.
If the value is Yes, then users with sufficient access rights to the Application settings panel can edit the setting.
- The ‘Copy allowed’ column indicates whether or not users can copy the
application setting.
If the value is Yes, then users can copy the setting to other valid user groups.
| Configuration entry | Default value | Description | Editing allowed | Copy allowed |
|---|---|---|---|---|
| .CONFIG:LOG_LEVELS | Error |
The values selected in this setting determine which message types are written to the system log. The valid value for each severity level is On (1) or Off (0). One message type corresponds to each severity level:
To enable or disable a log message type, click and select or clear the check box for this log message type. You cannot disable the Error message type. |
Yes | No |
| .CONFIG:onHouseKeeping_CleanDataqueue | Enabled | If this setting is enabled, then the status of expired transactions that are currently in the data queue is changed from Active to Rejected after ten days. | Yes | No |
| .CONFIG:onHouseKeeping_CleanSysLog | Enabled | If this setting is enabled, then entries are deleted from the SSystemLog table. | Yes | No |
| .CONFIG:ONHOUSEKEEPING_DLTDATAQUEUE1000 | Enabled | This setting is used to enable or disable the continuous deletion of
accepted transactions from the data queue
after a certain number of days, which is defined in this setting: .CONFIG:ONHOUSEKEEPING_STS1000TRNSDAYS |
Yes | No |
| .CONFIG:ONHOUSEKEEPING_DLTDATAQUEUE2000 | Enabled | This setting is used to enable or disable the continuous deletion of
rejected transactions from the data queue
after a certain number of days, which is defined in this setting: .CONFIG:ONHOUSEKEEPING_STS2000TRNSDAYS |
Yes | No |
| .CONFIG:ONHOUSEKEEPING_STS1000TRNSDAYS | 15 | This setting defines the number of days before deletion of accepted transactions. | Yes | No |
| .CONFIG:ONHOUSEKEEPING_STS2000TRNSDAYS | 100 | This setting defines the number of days before deletion of rejected transactions. | Yes | No |
| .CONFIG:onHouseKeeping_SysLogDays | 20 | This setting defines the number of days to keep log entries before deletion. | Yes | No |
| GRAPH:DualPath | Disabled | If this setting is enabled and if customer returns exist, then the graph in the Trace Step diagram shows double trace routes. You can visualize the incoming and outgoing stock movements for customer returns in the same warehouse. | Yes | Yes |
| GRAPH:IncludeDataGrid | Disabled | If this setting is enabled, two buttons, , and will appear in the Trace Step Diagram. This allows you to change the layout of the Trace Step Diagram between a diagram view and a list view. | Yes | Yes |
| .GRAPH:MAXCHILD | 30 | This setting defines the maximum number of children that can be displayed by a parent batch on the Trace Step diagram. | Yes | No |
| .GRAPH:MAXLEVEL | 15 | This setting defines the maximum number of levels that can be displayed by a selected batch on the Trace Step diagram. | Yes | No |
| .GRAPH:MAXOBJECTS | 1500 | This setting defines the maximum number of trace objects that can be displayed on a graph. | Yes | No |
| .INTERFACE:ADMIN_CONFIG | Enabled, only for the GLTADMIN user group | If this setting is enabled, then the user can select from the menu pane. To make changes to settings, the user can click the button. If this setting is disabled, then the list is hidden to the user. | Yes | Yes |
| .INTERFACE:ADMIN_CONFIG_ADD | Enabled, only for the GLTADMIN user group | This setting is used in conjunction with the .INTERFACE:ADMIN_CONFIG setting. If this setting is enabled, then, to copy application settings to other user groups, the user can click the button. If the setting is disabled, then the copy function is not allowed. | Yes | Yes |
| .INTERFACE:ADMIN_JOBSCHEDULE | Enabled, only for the GLTADMIN user group | If this setting is enabled, then the data transfer schedules can be modified, enabled, and disabled. See Schedule Daily Processing panel and Schedule Processing Transaction Data panel. | Yes | Yes |
| .INTERFACE:ADMIN_LOCALIZATION | Enabled, only for the GLTADMIN user group | This setting is used to enable or disable language settings management, for example, customizing list headings, labels, and user messages. | Yes | Yes |
| .INTERFACE:ADMIN_OTHERLANGUAGE | Disabled | This setting is used to enable or disable the language creation function. | Yes | No |
| .INTERFACE:ADMIN_PANEL_CONFIG | Enabled, only for the GLTADMIN user group | If this setting is enabled, then the user can select from the menu pane. To make changes to panel settings, the user can click the button. If this setting is disabled, then the list is hidden to the user. | Yes | Yes |
| .INTERFACE:ADMIN_PANEL_CONFIG_ADD | Enabled, only for the GLTADMIN user group | This setting is used in conjunction with the .INTERFACE:ADMIN_PANEL_CONFIG setting. If this setting is enabled, then, to copy panel settings to other user groups, the user can click the button. If the setting is disabled, then the copy function is not allowed. | Yes | Yes |
| .INTERFACE:ADMIN_PANEL_CONFIG_DELETE | Enabled, only for the GLTADMIN user group | This setting is used in conjunction with the .INTERFACE:ADMIN_PANEL_CONFIG setting. If this setting is enabled, then, to delete panel settings for user groups, the user can click the Delete button. If the setting is disabled, then the delete function is not allowed. | Yes | Yes |
| .INTERFACE:ADMIN_RELOADTRACELINE | Enabled, only for the GLTADMIN user group | This setting is used to enable or disable the option to run ad-hoc data transfer from the source database. | Yes | Yes |
| .INTERFACE:ADMIN_SYSTEMLOG | Enabled, only for the GLTADMIN user group | If this setting is enabled, then system log entries can be reviewed in the trace line database. See System Log panel. | Yes | Yes |
| .INTERFACE:EXPORT_FORMAT | CSV | This setting defines the format of the file created when exporting data to a spreadsheet. By default, this setting is set to CSV. You can also specify XLS. | Yes | Yes |
| .INTERFACE:NAVIGATE_ALLNEXT | Enabled | If this setting is enabled, then the Trace Step diagram shows the button. If the user clicks this button, then the Trace Step diagram shows the highlighted trace step and all the subsequent steps. | Yes | Yes |
| .INTERFACE:NAVIGATE_ALLPREV | Enabled | If this setting is enabled, then the Group panel shows the button. If the user clicks this button, then a list shows all the previous objects in the traces represented by the group. | Yes | Yes |
| .INTERFACE:NAVIGATE_ALLPREVIOUS | Enabled | If this setting is enabled, then the Trace Step diagram shows the button. If the user clicks this button, then the Trace Step diagram shows the highlighted trace step and all the preceding steps. | Yes | Yes |
| .INTERFACE:NAVIGATE_COMMONALLPREV | Enabled | If this setting is enabled, then the Group panel shows the button. If the user clicks this button, then a list shows all the previous objects common to all lines in the traces represented by the group. | Yes | Yes |
| .INTERFACE:NAVIGATE_COMMONFIRST | Enabled | If this setting is enabled, then the Group panel shows the button. If the user clicks this button, then a list shows the first objects common to all lines in the traces represented by the group. | Yes | Yes |
| .INTERFACE:NAVIGATE_COMMONLAST | Enabled | If this setting is enabled, then the Group panel shows the button. If the user clicks this button, then a list shows the last objects common to all lines in the traces represented by the group. | Yes | Yes |
| .INTERFACE:NAVIGATE_FILTER | Enabled | If this setting is enabled, then the Trace panel shows the button. If the user clicks this button, then the list of trace objects is restricted based on the value selected in the filter. | Yes | Yes |
| .INTERFACE:NAVIGATE_FIRST | Enabled | If this setting is enabled, then the Group panel shows the button. If the user clicks this button, then a list shows the first objects in the traces represented by the group. | Yes | Yes |
| .INTERFACE:NAVIGATE_LAST | Enabled | If this setting is enabled, then the Trace and Group panels show the button. If the user clicks this button in the Trace panel, then a list shows the last objects in the trace line. If the user clicks this button in the Group panel, then a list shows the last objects in the traces represented by the group. |
Yes | Yes |
| .INTERFACE:NAVIGATE_NEW | Enabled | If this setting is enabled, then the button is displayed in the Trace panel. If the user clicks this button, then the drop-down menu shows the existing groups, and new groups can be created using the option. | Yes | Yes |
| .INTERFACE:NAVIGATE_NEXT | Enabled | If this setting is enabled, then the Trace panel shows the button. If the user clicks this button, then a list shows the next objects in the trace line. | Yes | Yes |
| .INTERFACE:NAVIGATE_ORIGIN | Enabled | If this setting is enabled, then the Trace panel shows the button. If the user clicks this button, then a list shows the first objects in the trace line. | Yes | Yes |
| .INTERFACE:NAVIGATE_OVERVIEW | Enabled | If this setting is enabled, then the Trace Step diagram shows the button. If the user clicks this button, then the Trace Step diagram shows again the Trace Step diagram for the highlighted trace step. | Yes | Yes |
| .INTERFACE:NAVIGATE_PREVIOUS | Enabled | If this setting is enabled, then the Trace panel shows the button. If the user clicks this button, then a list shows the previous objects in the trace line. | Yes | Yes |
| .INTERFACE:NAVIGATE_REPORT | Enabled | If this setting is enabled, then the user can use the button in the Trace and Group panels, and select reports from the menu in the Application menu pane. | Yes | Yes |
| .INTERFACE:RECLASS_REASON_REQUIRED | Disabled | If this setting is enabled, then the user must select a transaction reason before reclassifying an item or lot. | Yes | Yes |
| .INTERFACE:SEARCH_ATTRIBUTE | Enabled | This setting determines whether the Attribute search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_ATTRIBUTE_COUNT | 5 | This setting defines the number of attributes on the Attributes search page. This number can be from 1 to 10. | Yes | Yes |
| .INTERFACE:SEARCH_DISTRIBUTION | Enabled | This setting determines whether the Distribution search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_GENERAL | Enabled | This setting determines whether the Quick search option is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_GROUP_DETAIL_COUNT | 250 | This setting is used to limit the number of items allowed in a group. | Yes | No |
| .INTERFACE:SEARCH_GROUPHOLD | Enabled | This setting defines whether the Group Hold Report search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_LOT | Enabled | This setting defines whether the Lot search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_MOAUDIT | Enabled | This setting defines whether the Manufacture Audit Report search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_PRODUCTION | Enabled | This setting defines whether the Production search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_PURCHASE | Enabled | This setting defines whether the Purchase search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_REJECTED | Enabled | This setting defines whether the Rejected Transactions Report search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_SALE | Enabled | This setting defines whether the Sale search page is available to the user. | Yes | Yes |
| .INTERFACE:SEARCH_STOCK | Enabled | This setting defines whether the Stock search page is available to the user. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_[…] | Enabled | These settings are used to enable and disable tabs for trace step details. An example is the Location Content tab for the Blend trace items. | ||
| .INTERFACE:TABS_DataDetails_DBV_Blend_1 | Enabled | If this setting is enabled, then the Location Content tab and any related information for the Blend transaction are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Blend_2 | Enabled | If this setting is enabled, then the Location Cleaning tab and any related information for the Blend transaction are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Blend_3 | Enabled | If this setting is enabled, then the Quality Inspection tab and any related information for the Blend transaction are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Customer_1 | Enabled | If this setting is enabled, then the All lots this order line tab and any related information for the Sale search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Customer_2 | Enabled | If this setting is enabled, then the Sublot Controlled tab and any related information for the Sale search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Customer_3 | Enabled | If this setting is enabled, then the Quality Inspection tab and any related information for the Sale search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Distribute_1 | Enabled | If this setting is enabled, then the Distributed lots tab and any related information for the Distribution search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Distribute_2 | Enabled | If this setting is enabled, then the Sublot Controlled panel can copy many application settings to different user tab and any related information for the Distribution search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Distribute_3 | Enabled | If this setting is enabled, then the Quality Inspection tab and any related information for the Distribution search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Manufacture_1 | Enabled | If this setting is enabled, then the Operations tab and any related information for the Production search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Manufacture_2 | Enabled | If this setting is enabled, then the Attributes tab and any related information for the Production search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Manufacture_3 | Enabled | If this setting is enabled, then the Quality Inspection tab and any related information for the Production search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Manufacture_4 | Enabled | If this setting is enabled, then the Co-, By- and End Products tab and any related information for the Production search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Manufacture_5 | Enabled | If this setting is enabled, then the Manufactured Lots tab and any related information for the Production search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Manufacture_6 | Enabled | If this setting is enabled, then the Sublot Controlled tab and any related information for the Production search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Purchase_1 | Enabled | If this setting is enabled, then the Attributes tab and any related information for the Purchase search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Purchase_2 | Enabled | If this setting is enabled, then the Quality Inspection tab and any related information for the Purchase search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Purchase_3 | Enabled | If this setting is enabled, then the Grower Quality Inspection tab and any related information for the Purchase search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Purchase_4 | Enabled | If this setting is enabled, then the Base Origin tab and any related information for the Purchase search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Purchase_5 | Enabled | If this setting is enabled, then the Sublot Controlled tab and any related information for the Purchase search are displayed. | Yes | Yes |
| .INTERFACE:TABS_DataDetails_DBV_Purchase_6 | Enabled | If this setting is enabled, then the Deliveries tab and any related information for the Purchase search are displayed. | Yes | Yes |
| .M3API:API | Disabled | If this setting is enabled, then current stock can be reclassified in M3 Business Engine with the Group Hold Report and the Stock Products and Stock Components reports. | Yes | Yes |
| .M3API:E0PA | GLT | This setting represents the value of the Partner setting from the M3 Business Engine program ‘Stock Msg Partner. Open’ (MMS865). The value of the Partner field is used in the M3 Business Engine Reclassification API. | Yes | No |
| .M3API:PRLF | .EXE | This setting defines the M3 Business Engine API processing option. | No | |
| .M3API:REFRESHSTOCK | Disabled | If this setting is enabled, then the refresh function is available in the Stock Products and Stock Components reports. | Yes | Yes |
| .M3API:USD1 | This setting defines data sent in the user-defined field 1 for the MMS850MI transactions. | Yes | No | |
| .M3API:USD2 | This setting defines data sent in the user-defined field 2 for the MMS850MI transactions. | Yes | No | |
| .M3API:USD3 | This setting defines data sent in the user-defined field 3 for the MMS850MI transactions. | Yes | No | |
| .M3API:USD4 | This setting defines data sent in the user-defined field 4 for the MMS850MI transactions. | Yes | No | |
| .M3INFORMATION:BOM_Quantity | Enabled | If this setting is enabled, then the Materials tab on the Production Search page shows all available columns. If this setting is disabled, then only the component item number, the name, and the lot number are displayed. | Yes | Yes |
| .M3REPORT:Customer_Include_Returns | Enabled | If this setting is enabled, then customer return transactions are included in the Customer List report. | Yes | Yes |
| .M3REPORT:Hide_Optional_Material | Disabled | If this setting is enabled, then materials for which both reserved and reported quantities equal zero are hidden from the Material list tab and the related manufacturing reports. | Yes | Yes |
| .M3REPORT:LotAudit_ObjAutorization | Enabled | If this setting is enabled, then the .M3Sys:ObjAutorization setting is ignored only for the Lot Audit report. | Yes | Yes |
| .M3REPORT:MaterialList_Include_All | Enabled | If this setting is enabled, then by-products are displayed as a product and as a component in the Material List report. If this setting is disabled, then the by-product is displayed only as a component in the report. | Yes | Yes |
| .M3REPORT:MOAudit_MaxOrders | 1000 | This setting defines the maximum number of manufacturing orders that are included in the analysis for the Manufacturing Order Audit report. | Yes | Yes |
| .M3REPORT:REPORT_CustomerInfo | Enabled | If this setting is enabled, then the Customer List report is available to the user. | Yes | Yes |
| .M3REPORT:REPORT_LotAudit | Enabled | If this setting is enabled, then the Lot Audit report is available to the user. | Yes | Yes |
| .M3REPORT:REPORT_MaterialList | Enabled | If this setting is enabled, then the Material List report is available to the user. | Yes | Yes |
| .M3REPORT:MaterialList_Extended | Disabled | If this setting is enabled, additional information about Supplier is published on the Material List report. | Yes | Yes |
| .M3REPORT:REPORT_RawMaterial | Enabled | If this setting is enabled, then the Raw Material Content report is available to the user. | Yes | Yes |
| .M3REPORT:REPORT_ReclassifiedItemsLots | Enabled | If this setting is enabled, then the Reclassified Items/Lots report is available to the user. | Yes | Yes |
| .M3REPORT:REPORT_StockReport | Enabled | If this setting is enabled, then the Stock Products and Stock Components reports are available to the user. | Yes | Yes |
| .M3REPORT:REPORT_SUPPLIER_LIST | Enabled | If this setting is enabled, then the Supplier List report is available to the user. | Yes | Yes |
| .M3REPORT:RMContent_omit_Item_group | To omit raw and semifinished material from display on the Raw Material report, but to include them in the calculations, add one to or more of these settings. | Yes | No | |
| .M3REPORT:RMContent_omit_Item_type | To omitinclude them in the calculations, add one or more of these settings. | Yes | No | |
| .M3REPORT:RMContent_omit_Product_group | To omit raw and semifinished material from display on the Raw Material report, but to include them in the calculations, add one or more of these settings. | Yes | No | |
| .M3REPORT:RMContent_suppress_Item_group | To suppress raw and
semifinished material, add one or more of these settings. For
example, you can suppress packaging, from the
calculation and output of the Raw Material report. You can
suppress material by item type, item group, or product group. Each setting can hold one or more values and must be specified in this form:
|
Yes | No | |
| .M3REPORT:RMContent_suppress_Item_type | To suppress raw and
semifinished material, add one or more of these settings. For
example, you can suppress packaging from the
calculation and output of the Raw Material report. You can
suppress material by item type, item group, or product group. Each setting can hold one or more values and must be specified in this form:
|
Yes | No | |
| .M3REPORT:RMContent_suppress_Product_group | To suppress raw and
semifinished material, add one or more of these settings. For
example, you can suppress packaging from the
calculation and output of the Raw Material report. You can
suppress material by item type, item group, or product group. Each setting can hold one or more values and must be specified in this form:
|
Yes | No | |
| .M3REPORT:RMContent_Unit | KG | This setting defines the unit of measure value used as the base unit or alternate unit in the Raw Material Shipped Quantity and Raw Material Content reports. All raw materials, semifinished products, and end products are converted to this unit. If the catch weight is used, then the unit must represent the defined catch weight unit. | Yes | No |
| .M3SYS:AuthorizationProgram | SES400 | This setting determines which M3 Business Engine security option is
used. If the value is SES400, then authorization to M3 Graphical Lot Tracker is based on roles associated to the user. The roles become M3 Graphical Lot Tracker user groups in the Application Settings panel. If the value is SES003, then authorization to M3 Graphical Lot Tracker is based on a functional level. Users are assigned to groups associated to M3 Business Engine functions. These groups become the M3 Graphical Lot Tracker user groups in the Application Settings panel when this option is used. |
Yes | No |
| .M3SYS:DaysForOpenMO | 30 | This setting defines the number of days during which an order remains open for adding trace. This information is used in the analysis for the Manufacturing Order Audit Report. | Yes | No |
| .M3SYS:Function_Cat | MSH | This setting defines the function category for M3 Graphical Lot Tracker user groups. This setting is used in conjunction with the .M3SYS:AuthorizationProgram setting for security through functional authority (SES003). | Yes | No |
| .M3SYS:Function_Component_Group | GLT | This setting defines the function component group for M3 Graphical Lot Tracker user groups. This setting is used in conjunction with the .M3SYS:AuthorizationProgram setting for security through functional authority (SES003). | Yes | No |
| .M3SYS:Hide_SSCC_Result | Disabled | If this setting is enabled, the SSCC number will be excluded from the Sale Search result list. | Yes | Yes |
| .M3SYS:Include_Pending_QI | Disabled | This setting determines whether to include QI Requests with a Request Status of 'Pending' and 'Replaced' on the Trace Panel QI tabs. | Yes | Yes |
| .M3Sys:ObjAutorization | Disabled | If this setting is enabled, then M3 Business Engine object access authority is enabled in M3 Graphical Lot Tracker. Users are associated to user groups in M3 Business Engine and have access only to objects associated to the groups. Examples include specific warehouses and facilities. | Yes | Yes |
| .M3SYS:Subcon_OverrideIssueMethod | Disabled | If this setting is enabled, then the issue method ‘Issue from MO' is overridden for any raw material used for the subcontracted operation. The issue method is transformed into a valid ‘Issue from RO’ transaction, thus preventing M3 Graphical Lot Tracker from rejecting the transaction. | Yes | No |