Create and set Landmark configuration parameters

These instructions explain how to create and set the userbodconfig parameter for a user BOD on-premises deployment. Landmark installations that run with user BODs must perform this procedure.

Note: This parameter must be set in the gen data area.
  1. Login to Infor Landmark Technology.
  2. Navigate to the Administration Console.
  3. Click the Configuration Parameters tab.
  4. Click Create and select Create from the menu.
  5. Add the userbodconfig parameter. Specify this information exactly as shown here. The parameters are case-sensitive.
    Component
    Enter config
    Key
    Enter userbodconfig
    Type
    Select Alpha from the drop down menu.
    Length
    Enter 300
    Value
    Enter IFSOnPrem
  6. Click Save.
  7. From the Actions drop-down menu, choose Create.
  8. Check to see if the parameter tenantid exists and is set as shown here. If it is not, add the tenantid parameter. Specify this information exactly as shown here. The parameters are case-sensitive.
    Component
    Enter ion
    Key
    Enter tenantid
    Type
    Select Alpha from the drop down menu.
    Value
    Enter infor
  9. Click Save.
  10. From the Actions drop-down menu, choose Create.
  11. Check to see if the parameter select.using.logicalid exists and is set as shown here.Add the select.using.logicalid parameter. Specify this information exactly as shown here. The parameters are case-sensitive.
    Component
    Enter ion
    Key
    Enter select.using.logicalid
    Type
    Select boolean from the drop down menu.
    Value
    Select False
  12. Click Save.