whwmd domains

LN allows outbound advice, even if insufficient inventory is available and even if no on-order quantity is available to fulfill the demand.

LN allows no outbound advice if insufficient inventory is available. A shortage report is printed instead.

LN allows outbound advice if insufficient inventory is available, but only up to the on-order quantity to be received that will fulfill the demand.

Automatically release production orders created for the selected production order advice.

Do not automatically release production orders created for the selected production order advice.

The default setting is taken from the Automatically Release Production Orders check box in the Item Data by Warehouse (whwmd2510m000) session. If this check box is selected for the warehouse and item of the production order advice in the selection range, the generated production orders are automatically released. If this check box is cleared, the production orders are released in the Release Production Orders (tisfc0204m000) session.

The main packaging item of the current node.

The number of packaging items of the generated child handling units.

The item quantity contained in the generated handling unit structure.

The shipment is confirmed without a warning message.

The confirmation message is displayed and the shipment is confirmed based on the option you select.

The shipment is blocked.

If imposed on inbound procedures, receipt and inbound inspection procedures are not allowed for the warehouse.

If imposed on outbound procedures, outbound and shipment procedures are not allowed for the warehouse.

If imposed on inbound procedures, confirming receipts is blocked for the warehouse.

If imposed on outbound procedures, confirming shipments is blocked for the warehouse.

For all other inbound or outbound procedures, a warning is displayed and the user is prompted to cancel the procedure or to continue.

No warehouse blocking is imposed.

The initial status, a decision on the disposition of the items has not yet been made.

Disposition is not used.

The items will be used in their current form.

No problem with these items.

The items are of no use anymore. If you select this option, LN creates an adjustment order that removes these items from inventory.

The items are returned to the supplier. This applies to rejected purchased items.

LN creates a purchase return order and launches the outbound process that issues the items from quarantine and ships the items to the supplier.

The items are to be reworked.

If you select this option, LN creates an JSC Production rework order. Upon releasing the rework order, LN creates a warehousing outbound order that issues the rework items to production.

The items are to be reworked.

If you select this option, LN creates an JSC Production rework order. Upon releasing the rework order, LN creates a warehousing outbound order that issues the rework items to production. For items to be reworked to a new specification, you must specify a new target item on the disposition line.

The items are reclassified.

If you select this option, LN creates an item transfer. You must specify a new to-item for these items. The item transfer stores the new to-item in the same warehouse. If locations apply, you can specify a pick or bulk location.

A field from the Handling Units (whwmd5130m000) session.

Field types are not used.

A field from the tccom000 table.

Mid or bottom level handling unit

Handling unit types are not used.

Top level handling unit that contains multiple types of items.

Top level handling unit that contains one type of item

If the status is Tentative, you cannot yet use the warehouse and item combination in Warehousing . As a result, you cannot receive the item in the warehouse.

If the status is Active, you can use the warehouse and item combination in Warehousing .

The kanban signal is used in the kanban loop.

The kanban signal is not used and is not available for reuse.

The kanban signal is not used. The kanban signal is available for reuse.

The labels are printed by LN.

The labels are printed by an external application.

LN prints a label for each handling unit in the specified range.

LN prints labels for handling units based on the handling unit structures. In the Label Structure Part(s) to Print field you can specify for which part of the handling unit structures the labels must be printed.

The location in which the received goods are placed while they await the generation of an inbound advice.

The inventory location designated for order picking purposes. A pick location is mainly used for the outbound of small quantities and/or containers that can be replenished by bulk locations.

The location used mainly for large inbound quantities and/or containers and to indicate from which pick locations can be replenished.

A shipping dock in the warehouse where items are held just before they are placed on any means of transport for shipment.

A type of inventory location exclusively designated to store items that are eligible for inspection upon receipt.

After the items have passed inspection, they are transferred to:

• A normal location if they are approved.
• A quarantine location if they are rejected.

Goods in an inspection location are always considered to be on-hold inventory.

A type of warehouse location in which goods initially rejected during warehousing inspection or production are stored for further examination to determine their disposition.

Outbound advice control the issue of the item from the current warehouse, without ownership restrictions.

Outbound advice for owned inventory is issued before not-owned inventory.

Outbound advice for not-owned inventory is issued before owned inventory.

Outbound advice is not used in the current warehouse, for example, because the warehouse is a financial warehouse.

This is the initial state of the prepacking advice lines. The planner generates or adds the proposed stock points.

Proposed stock points are created for the prepacking advice line. This status is set when at least one proposed stock point is present for the packing of the prepacking advice line.

The inventory is available for packing when the inventory is moved from the bulk/pick location to the packing location. The inventory is now committed on the stock point level and is not available for other users.

The first packing action for a specific prepacking advice line is executed. In case of only one actual stock point for the prepacking advice line, this status is not applicable.

All actual stock points for the prepacking advice lines are packed into the respective handling units.

The demands are changed, or when prepacking advice is canceled.

The initial status of the prepacking advice. In this phase the planner generates the proposed stock points, projected handling units and the goods are prepared for the packer. Prepacking advice with this status can be removed from the shipment header.

The packer approves the prepacking advice. This status can be reversed to New. Prepacking advices which are not approved cannot be used to move inventory to the packaging location (actual stock points cannot be created for warehouses that are not location-controlled). The prepacking advice cannot be removed from the shipment header.

The packing is initiated. Removal prepacking advice is not possible.

The packer has completed the packaging activities for all lines that require packaging. This status is set only if all prepacking advice lines are packed. Unpacking a line resets the status to Packing in Process. You cannot delete a prepacking advice with this status.

The packer has completed all the packaging activities. When the status is set to Complete, the handling units are committed.. You can remove the prepacking advice from the shipment header.

The planner or the packer sets this status when repacking takes place during the picking process or demands are not required anymore. All the lines linked to the canceled prepacking advice are considered obsolete. You can remove the prepacking advice from the shipment header.

A fixed package definition includes a handling unit template in which the number of packaging items and items is fixed.

The relations between the nodes are user-definable. This means that, unlike fixed package definitions, you can specify the number of packing items per node both on general and item-level handling unit templates without referring to the storage units and conversion factors defined in Common . In addition, you can define various nodes with different packaging items for all nodes except the top node.

Mixed package definitions are used to define packing structures that include more than one item.

Goods are stored inside the package: for example, a box or carton. Because the goods are stored inside the package, the dimensions of the package represent the dimensions of the goods.

Goods are stored on the package: for example, a pallet. The dimensions of the package must be added to the dimensions of what is on the package.

The handling units in the structure are printed according to the top-down structure.

Example 1

The handling units in the structure are printed level by level.

Example 2

Order advice is present for the kanban signal.

The kanban process is not applicable.

The order advice created for the kanban signal is confirmed.

A production, purchase or warehouse order is present for the kanban signal.

A receipt line is present for the kanban signal.

The receipt of the kanban signal is confirmed.

New handling units are generated according to the package definition specified in the Target Package Definition field.

The source handling unit is added to the handling unit specified in the Target Handling Unit field.

Items rejected during warehouse inspection are sent to quarantine.

Rejects handling is not applicable for the current item or warehouse, or quarantine inventory is not activated.

Items rejected during warehouse inspection are scrapped. You must enter a scrap reason. LN creates an adjustment order to remove the items from inventory.

You can specify the quantity to be scrapped or sent to quarantine. For scrapped items, you must enter a scrap reason.

When an item is stored at the location or the warehouse, LN monitors whether this storage condition has been assigned to the item or the item group and what the corresponding condition type is.

The following condition types result in a positive advice:

• Present for Location
• Common

When an item is stored at the location or warehouse, LN monitors whether this storage condition has been assigned to the item or the item group and what the corresponding condition type is.

When the following condition types are not found for the item or item group, LN issues a positive advice:

• Present for Location
• Common

LN does not monitor whether the Absent for Location condition type is present. The presence or absence of this condition type does not influence the advice.

When an item is stored, LN does not monitor whether the storage condition assigned to the warehouse or location has also been assigned to the item or item group. However, when the same storage condition has been recorded with the Present for Location condition type for an item or item group, this storage condition is signaled when storage conditions are compared (starting from the item/item group). In such a case, LN gives a positive advice.

The storage condition in the Item - Storage Conditions (whwmd1104m000) session should exist.

The storage condition in the Item - Storage Conditions (whwmd1104m000) session should not exist or should be equal to Absent for Location.

It is irrelevant whether the storage condition exists for an item.

If you click Continue, the changes made in the current session are displayed in the Update Kanban Parameters (whwmd2113m000) session in which you can preview the results before actually committing them.

If you click Continue, the changes made in the current session are immediately updated.

If you click Continue, a report is printed in which you can preview the results of the global update before the global update is actually carried out.

The received Handling Unit of the receipt line.

The serial item of the service number.

The segment is an LN table field.

The segment is a data identifier from the data identifier set linked to the RFID structure.

The segment is a manually specified alphanumeric text.

Time-phased order point (TPOP)

Kanban is typically used for low-cost component items, and not used for External Kanban Controlled Items. See Kanban.

Used if Manufacturing is implemented. See Order Controlled/Batch setup and order generation.

Used if Manufacturing is implemented. See Order Controlled/SILS setup, assembly kits, and order generation.

Used for subassembly items if Manufacturing is implemented. See Order Controlled/Single setup and order generation.

The default supply system of the warehouse is used. The default supply system of the warehouse is specified in the Supply System field of the Warehouses (whwmd2500m000) session.

If multisite is activated, the default value is taken from the Supply System field of the Warehousing Settings by Site (whwmd2101m000) session.

Used for purchased configurable items.

LN generates a warehousing order of type Transfer (Manual) for the warehouse that is specified in the Supply Code field.

LN generates a purchase schedule call-off for the buy-from business partner that is specified in the Supply Code field.

LN generates a production order.

The Delivery notes are always printed for shipments leaving the warehouse, even if the delivery note is not part of the order procedure. The Print Delivery Notes in Order Language field in the Print Delivery Notes (whinh4477m000) session is set to Yes.

LN always prints a delivery note, even if the delivery note is not defined as a step in the order procedure. For the shipments for which an invoice can be printed, LN does not print the delivery note and the invoice serves as a transport document.

The Print Delivery Notes in Order Language checkbox in the Print Delivery Notes (whinh4477m000) session is:

• Yes for the order origins for which invoice procedure is not defined.
• No for orders of the type sales orders, sales schedules, service orders, maintenance sales order or purchase (return) order.

Delivery Notes are printed based on the settings of the warehouse order type and warehouse order. If the delivery note is not defined as a step in the order procedure, delivery note is not printed. LN defaults the value in the Print Delivery Notes in Order Language field from the value specified in the Activities by Procedure (whinh0106m000) session.

LN does not print delivery notes. Even if the delivery note is defined as a step in the order procedure, delivery note is not printed. The Print Delivery Notes in Order Language field in the Print Delivery Notes (whinh4477m000) session is set to No.

The item values from the Items - Ordering (tcibd2100m000) session are used. If multisite is activated, the values from the Items - Ordering by Site (tcibd2150m000) session are used.

The item values from the Items - Ordering (tcibd2100m000) session are not used. If multisite is activated, the values from the Items - Ordering (tcibd2100m000) session or the Items - Ordering by Site (tcibd2150m000) session are not used.

The setting of the Use Item Ordering Data check box for the relevant warehouse in the Warehouses (whwmd2500m000) session determines whether item values from the Items - Ordering (tcibd2100m000) session are used.

If multisite is activated, the setting of the Use Item Ordering Data check box and the Use Site Settings check box determines whether item values from the Items - Ordering (tcibd2100m000) session or the Items - Ordering by Site (tcibd2150m000) session are used.

Checks whether the field contains a value.

Checks whether the field ends with the value specified in the Constant Value field.

Checks whether the value of the field equals the value specified in the Constant Value field.

A validation check is not used.

Checks whether the value of the field is different from the value specified in the Constant Value field.

Checks whether the field contains a numeric value.

Checks whether the field contains an alphanumeric value.

Checks whether the field matches the number of positions specified in the Length field.

The check is performed for the field specified in the Field field

Checks whether the field contains the value of the related field.

Checks whether the field starts with the value specified in the Constant Value field.

Lines that are deleted for a validation rule and present in the Validation Rules by Business Partner (whwmd1155m000) session are not deleted.

Set the expiry date to the current date for lines that are deleted for a validation rule and present in the Validation Rules by Business Partner (whwmd1155m000) session.

Clears the Active check box for lines that are deleted for a validation rule and present in the Validation Rules by Business Partner (whwmd1155m000) session.

Lines that are deleted for a validation rule and present in the Validation Rules by Business Partner (whwmd1155m000) session are also deleted.

Work days without production for the current kanban item and warehouse are not included in the calculation of the average daily demand.

Work days without production for the current item and warehouse are included in the calculation of the average daily demand.

Work days without production within the Horizon for Historical Demand are included in the calculation of the average daily demand for the current item and warehouse.

Work days without production within the Horizon for Future Demand are included in the calculation of the average daily demand for the current item and warehouse.