Reference Activity - Subassemblies by Site (tsacm2152m000)

Field Information

Reference Activity

The reference activity for which the subassembly is created.

Note: This value is defaulted from the Reference Activity for Site (tsacm1602m000) session.

Site

The code of the site to which the reference activity is assigned.

Line

The line number for the subassembly.

Item

The code of the item specified for the subassembly.

Note: This item must not be same as the Item specified in the Reference Activity for Site (tsacm1602m000) session.

Planned Quantity

The quantity of the subassembly item.

Note: 

• The value in this field is set to 1 and you cannot modify this value if the Configuration Controlled field is set to Serialized in the Items - Service (tsmdm2100m000) session for the subassembly item.
• The value in this field is considered valid only if the specified value is greater than zero.

Quantity Unit

The unit in which the planned quantity is expressed.

Effective Time

The effective date and time.

Note: 

• This value is defaulted from the Reference Activity for Site (tsacm1602m000) session. However, you can modify this value.
• This value must not exceed the Expiry Time.

Expiry Time

The expiry date and time.

Note: 

• This value is defaulted from the Reference Activity for Site (tsacm1602m000) session. However, you can modify this value.
• You must set this field to a value greater than the Effective Time.

Action Outgoing Subassembly

The action performed on the outgoing subassembly.

Allowed values

To Location

The subassembly is transferred to the specified location. The subassembly is received from this location for assembly activity.

To Location for Work

The subassembly is transferred to the specified location. A work order is generated to perform additional work on the subassembly.

To Warehouse

The subassembly is transferred to the specified warehouse. The value is defaulted from the Service Offices (tsmdm1100m000) session. However, you can change the value. The subassembly can also remain in the warehouse. The Ownership of the subassembly must be set to Company Owned. The Action Incoming Subassembly field must be set to No Action. To replace the subassembly, a material resource line must be created.

To Department

The subassembly is transferred to the specified department. A new work order must be created for the department to which the subassembly is transferred. The related orders (the initiating work order and the related work order) are maintained in the Related Orders (tsmdm4500m000) session.

To Subcontractor

The subassembly is transferred to the specified subcontractor. When the outgoing subassembly is processed, a subcontracting activity is added to the work order. When this activity is released, a subcontracting purchase order (with the cost item) is generated for the work order.

Note: The subassembly is specified on the Purchase Orders (tdpur4100m000) header.

To Scrap

The subassembly is scrapped. No incoming subassembly is created. You can replace the subassembly with a new part (item) from the warehouse.

To be Decided

The process is stopped until another action for the outgoing subassembly is specified.

Not Applicable

Note: This value is defaulted from the Items - Service (tsmdm2100m000) session. However, you can modify this value.

Location

The code of the location to which the outgoing subassembly is transferred.

Note: This field is enabled and mandatory if the Action Outgoing Subassembly is set to To Location or To Location for Work.

Warehouse

The code of the warehouse to which the outgoing subassembly is transferred.

Note: 

• This field is enabled and mandatory if the Action Outgoing Subassembly field is set to To Warehouse or To Department. In this scenario, the value is defaulted from the Warehouse Outgoing Parts field in the Service Offices (tsmdm1100m000) session, based on the Work Center or the Service Office specified for the parent Reference Activity.
• This field is enabled and mandatory if the Action Outgoing Subassembly field is set to To Subcontractor and the Supply Item to Subcontractor check box is selected in the Reference Activities (tsacm1101m000) session. In this scenario, the value is defaulted from the Warehouse Outgoing Parts field in the Service Offices (tsmdm1100m000) session, based on the Work Center or the Service Office specified for the Reference Activity.

Operations Department

The code of the department to which the outgoing subassembly is transferred.

Note: 

• This field is enabled and mandatory when Action Outgoing Subassembly is set to To Department.
• The Warehouse Incoming Parts must be defined for this department in the Service Offices (tsmdm1100m000) session.
• This value must not be same as the Work Center or the Service Office specified in the Reference Activities (tsacm1101m000) session.

Action Incoming Subassembly

The action performed on the incoming subassembly.

Allowed values

From Location

The subassembly is received from the specified location. The Disassembly Activity must be processed to receive the item.

From Location for Work

The subassembly is received from the specified location. The Assembly Activity is executed only after the related work order for the subassembly is completed and closed.

From Warehouse

The subassembly is received from the specified warehouse. A warehouse order is created when the Disassembly Activity is processed. The Assembly Activity is executed only after the item is delivered by Warehousing . If the outgoing subassembly is scrapped, you can generate a material resource line to replace the item.

From Department

The subassembly is received from the specified department. The Disassembly Activity must be processed to receive the item. The Assembly Activity is executed only after the related work order is created.

From Subcontractor

The subassembly is received from the specified subcontractor. The assembly activity is executed only after the outgoing subassembly is processed and the subcontracting purchase order is generated.

No Action

The assembly activity does not use this subassembly.

To be Decided

The process is stopped until another action for the outgoing subassembly is specified.

Not Applicable

Note: The From Warehouse and the No Action options in this field are enabled only when the Action Outgoing Subassembly is set to To Warehouse.

Master Routing

The code of the master routing applicable for the Action Outgoing Subassembly.

Note: 

• This field is enabled when Action Outgoing Subassembly is set to To Location for Work or To Department.
• The Reference Activity must not be specified.
• The Activity Use field must be set to Depot Repair or General in the Master Routings (tsacm1101m100) session.

Routing Option

The code of the routing option applicable for the Action Outgoing Subassembly.

Note: 

• This field is displayed only if:
  • The Use Master Routing check box is selected in the Work Order Parameters (tswcs0100m000) session.
  • The Use Routing Options check box is selected in the Activity Management Parameters (tsacm0100m000) session.
• This field is enabled only if the Master Routing is specified.
• You cannot modify this value if the current date and time has exceeded the Expiry Time.

Reference Activity

The code of the reference activity that must be performed on the outgoing subassembly.

Note: 

• This field is enabled when Action Outgoing Subassembly is set to To Location for Work, To Department or To Subcontractor.
• This field is mandatory if the Action Outgoing Subassembly is set to To Subcontractor.
• The Master Routing must not be specified.
• The Activity Use must be set to Depot Repair or General in the Reference Activities (tsacm1101m000) session.
• The reference activity specified for the subassembly must not be same as the header Reference Activity.

Scrap Reason

The reason to scrap an item.

Note: 

• This field is enabled and mandatory only if the Action Outgoing Subassembly field is set to To Scrap.
• The Reason Type must be set to Return for Scrap in the Reasons (tcmcs0105m000) session.

Cost Component

The code of the cost component.

Note: 

• This field is enabled and is mandatory if:
  • The Action Outgoing Subassembly field is set to To Warehouse or To Department.
  • The Action Outgoing Subassembly field is set to To Subcontractor and the Supply Item to Subcontractor check box is selected in the Reference Activities (tsacm1101m000) session.
• The value in this field is defaulted from the Items (tcibd0501m000) session based on the Item.