Report Shift (tirpt4636m200)

Use this session to report when a shift is completed. The reported production quantities, hours spent and materials used must be checked and corrected if required , before the shift can be reported complete. The shifts must be reported complete for each work cell. LN does not allow you to update this data , after the work cell shift status is set to Completed. However, the shift must be reopened first.

This session can also be used by the supervisor to track progress, or view the status of a work cell.

Note: The Work Cell and Shift - Products (tirpt4137m000) session is displayed as an MMT session in this session.

If the Automatic Labor Hours and Automatic Work Cell Hours parameters are active in:

  • Repetitive Manufacturing Parameters (tirpt0100m000)
  • Production Settings by Site (timfc0180m000)
  • Repetitive Settings History by Site (tirpt0181m000)

Actual hours are approved automatically one a shift is reported complete in the Report Shift (tirpt4636m200) session.

Field Information

Shift
Site

The site ID.

Note: Only visible if multisite functionality is active.

Work Cell

The work cell code.

Shift

The unique ID for the shift.

Date

The date and time when the specified shift starts.

Start

The date and time when the specified shift starts.

End

The date and time when the specified shift concludes.

Status
Shift

The shift status.

Allowed values

Open

The shift is still in progress, work is being done on the work list in the Work List (tirpt4602m000) session.

Completed

The shift has ended.

Closed

The shift has ended, backflushing has taken place and cost documents are closed.

Work

The type of work taking place.

Allowed values

Set Up
Run
Down
Wait
Supervisor

The code of the supervisor who can manage one or more work cells, and is responsible for reporting on these work cells.

Change Date

The date the last status change took place.

Work Cell Hours
Estimated

The estimated time (in hours) calculated for this shift in the specified work cell. LN defaults the values based on the shift data in the Shift - Hours (tirpt4138m000) session.

Registered

The time (in hours) registered to complete a shift in the specified work cell. The time is categorized as run, setup, down and wait time.

Actual

The actual time (in hours) for this shift in the specified work cell. LN defaults the value to the registered hours. This can be corrected by the supervisor.

Note: 

The Automatic Work Cell Hours parameter must be selected in the Production Settings by Site (timfc0180m000), or, if Sites is not active, in the Repetitive Manufacturing Parameters (tirpt0100m000) sessions for the actual hours to be approved automatically once the shift is reported completed.

The backflushing calculation is based on the produced and rejected quantities.

Labor Hours
Estimated

The estimated labor hours of all workers for this shift.

Registered

The labor hours registered for this shift.

Materials

The actual labor hours for this shift. LN defaults the value to the registered hours. This can be corrected by the supervisor.

Note: The Automatic Labor Hours parameter must be selected in the Production Settings by Site (timfc0180m000), or, if Sites is not active, in the Repetitive Manufacturing Parameters (tirpt0100m000) sessions for the actual hours to be approved automatically once the shift is reported completed.
Units Completed

The estimated produced quantity for this shift.

Registered Total Produced

The registered produced quantity for this shift.