Process Variables by Line Station Order (tiasc2113m000)

Use this session to maintain process variables for line station order and to register the results of process inspections. Process variables are automatically created based on the assembly inspection protocol. The list of variables can also be modified for each line station order, if the Line Station Order Status field is set to Frozen or Ready to Start.

Field Information

Assembly Order

The assembly order.

Assembly Line

The description of the assembly order.

Line Station

The code of the line station where the operation is performed.

Line Station Order Status

The description of the line station.

Allowed values

Planned
Frozen
Ready to Start
Completed
Closed
Operation

The Operation code that is linked to the line station.

Process Variable

The code of the process variable.

Description

The description of the process variable.

Norm

The target value of the process variable.

Unit of Measure

The unit in which the target value of the process variable is measured.

Inspection Description

The additional information related to the target value.

Lower Limit

The process variable's lower control limit, which is expressed as an absolute value or as a percentage.

Upper Limit

The process variable's upper control limit that is expressed as an absolute value or as a percentage.

Registration Type

The registration type indicates whether results (measurements) need to be stored.

Allowed values

Optional Registration

The registration of the measured values is optional.

Mandatory Registration

The registration of the measured values is mandatory.

Instruction Only

By default, the registration type is set to this option, for example, when the production orders are migrated from previous feature packs.

Inspection Result

The inspection result value. LN defaults this value if the line station order status is Frozen or Ready to Start.

Note: This field is enabled only if the registration type is set to Optional Registration or Mandatory Registration.
Last Update Date

The last date and time when the inspection result is updated.

Registration Done

Set the status to Yes if the registration is done.