Received Item Engineering Revisions (tcibd0160m000)

Field Information

Overview Session

Item

The code of the engineering item for which the revision must be updated.

Source Revision

The revision number of the engineering item.

Status

The status of the engineering item revision.

Allowed values

Received

Processed

Rejected

Received On

The date and time on which the item revision data is received from Product Lifecycle Management (PLM).

Received By

The logon code of the user who received the item revision data from Product Lifecycle Management (PLM).

Processed On

The date and time on which the item revision data received from Product Lifecycle Management (PLM) is processed.

Processed By

Thelogon code of the user who processes the item revision data received from Product Lifecycle Management (PLM).

Rejected On

The date and time on which the item revision data received from Product Lifecycle Management (PLM) is rejected.

Rejected By

The logon code of the user who rejected the item revision data received from Product Lifecycle Management (PLM).

Item Type

The item type for which the revision is applicable.

Allowed values

Product

Purchased

Manufactured

Generic

Cost

Service

Subcontracted service

List

Tool

Equipment

Engineering module

Rental Product

Item Group

The item group to which the revision is applicable.

Source

The source of the item revision data.

Allowed values

EDM

IBD

PLM (Internal)

PLM (External)

Standard Product

Received Revision

Received

Effective Date

The date and time from which the item revision data received from Product Lifecycle Management (PLM) is valid.

Expiry Date

The date and time up to which the item revision data received from Product Lifecycle Management (PLM) is valid.

Search Key I

The first search key for the engineering item.

Search Key II

The second search key for the engineering item.

Picture

The picture of the engineering item.

Technical Coordinator

The code of the technical coordinator associated with the engineering item revision.

List Type

The additional specification of a list item.

Allowed values

Not Applicable

Kit

Option

Menu

Dimension Controlled

If this check box is selected, the engineering item is dimension controlled.

Order System

The order system for the engineering item.

Allowed values

SIC

Planned

FAS item

Manual

Inventory Unit

The unit in which the quantity of the item is expressed.

Unit Set

The default unit set for the items of the selected item type and item group.

Lot Controlled

If this check box is selected, the engineering item is a lot item.

Serialized

If this check box is selected, the engineering item is serialized item.

Configurable

If this check box is selected, the engineering item is a configurable item.

Note: This field is applicable only if these check boxes are selected in the Implemented Software Components (tccom0100s000) session:

• Infor Configurator (CPQ)
• Product Configurator (PCF)
• Assembly (APL/ASC/ASL)

Type of Replacement

The type of the replacement of the engineering item.

Allowed values

Not Applicable

The item does not replace any other item and is not replaced itself.

Replaced

The item is replaced by another item. You can find the replacing item in the Alternative Items (tcibd0505m000) session.

Substitute

The item has replaced another item. You can find the replaced item in the Alternative Items (tcibd0505m000) session.

Replaced Substitute

The item has replaced another item, and is replaced by another item itself. You can find the replacing and replaced item in the Alternative Items (tcibd0505m000) session.

Option Set

The option set associated with the engineering item.

Customizable

Indicates whether the engineering item is a customized item can be customized.

Note: This field is applicable only if these check boxes are selected in the Implemented Software Components (tccom0100s000) session:

• Infor Configurator (CPQ)
• Product Configurator (PCF)
• Project Control (PCS)

With PCS

If this check box is selected, for a main item, the item structure is generated using a PCS project.

Note: This field is applicable only if the Project Control (PCS) check box is selected in the Implemented Software Components (tccom0100s000) session.

Configuration Group

The default configuration group of the configurable item.

Note: This field is applicable only if the Infor Configurator (CPQ) check box is selected in the Implemented Software Components (tccom0100s000) session.

Unit Effective End Item

If this check box is selected, the engineering item is unit effective.

Note: This field is applicable only if the Unit Effectivity check box is selected in the Implemented Software Components (tccom0100s000) session.

Effectivity Units are Interchangeable

If this check box is selected, the effectivity unit is interchangeable between different effectivity units.

Note: This field is applicable only if the Unit Effectivity check box is selected in the Implemented Software Components (tccom0100s000) session.

Revision Controlled

Indicates whether the engineering item is revision-controlled.

Unit Effective Supply

If this check box is selected, LN communicates the effectivity unit of the parent item to the component items. This means that if the same component item is used in several unit effective parent items, several orders are generated for the component item, each order with its own effectivity unit.

Note: This field is applicable only if the Unit Effectivity check box is selected in the Implemented Software Components (tccom0100s000) session.

Update Method for E-Item Relation

Indicates the method in which LN manages the relationship between revisions of an EDM controlled engineering item and standard items or customized items.

Allowed values

Yes

If a new revision is created during engineering, and a relationship already exists between the engineering item and an item, the existing (effective) revision number is removed and replaced by the new revision number.

Freeze

If a new revision is created during engineering, and a relationship already exists between the engineering item and an item, the existing (effective) revision number stays the same, and is not changed. In other words, the revision number of the new revision will not replace the existing revision number.

Break

If a new revision is created during engineering, and a relationship already exists between the engineering item and an item, the existing (effective) revision number is removed. The removed revision number is not replaced by the new revision number, which means that no revision number is displayed anymore.

Change Management Allowed

If this check box is selected, you can use change orders from Change Management to control the item data and the effectivity dates of the BOM data and routing data of the item.

Note: This field is applicable only if the Object Data Management (DM) check box is selected in the Implemented Software Components (tccom0100s000) session.

Change Order

The change order that determines the effective date of the engineering item.

Note: This field is applicable only if the Object Data Management (DM) check box is selected in the Implemented Software Components (tccom0100s000) session.

Effective Date

The date and time from when the engineering item is valid.

Note: This field is applicable only if the Object Data Management (DM) check box is selected in the Implemented Software Components (tccom0100s000) session.

Effectivity Dates by Change Order

If this check box is selected, LN allows you to manage the effectivity dates of the bill of material and routing of the engineering item using the change orders.

Note: This field is applicable only if the Object Data Management (DM) check box is selected in the Implemented Software Components (tccom0100s000) session.

Multiple Change Orders Allowed

If this check box is selected, a single BOM line or routing operation can be controlled by more than one change order at a time. The first change order that is approved makes the BOM line or routing operation effective.

Note: This field is applicable only if the Object Data Management (DM) check box is selected in the Implemented Software Components (tccom0100s000) session.

Subassembly

If this check box is selected, the item is a subassembly.

Note: This field is applicable only if the Subcontracting with Material Flow check box is selected in the Implemented Software Components (tccom0100s000) session.

Container Item

If this check box is selected, a container is required for the engineering item.

Container

The type of the container that is used for the engineering item.

Cost Component

The code of the cost component applicable for the engineering item.

Mandatory Project Peg

If this check box is selected, the engineering item must be pegged to a project.

Note: This field is applicable only if the Project Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.

Inherit Project Peg

If this check box is selected, the project peg is also applicable for the dependent components of the main item.

Note: This field is applicable only if the Project Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.

Project Pegged Safety Stock Allowed

If this check box is selected, a safety stock is allowed for the engineering item in a project in which pegging is implemented.

Note: This field is applicable only if:

• The Project Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.
• The Project Pegged Safety Stock Allowed check box is selected in the Project Pegging Parameters (tcpeg0100m000) session.

Restrict Commingling and Transfers

If this check box is selected, commingling of supply for project pegged demand and cost transfer of project peg excess inventory are restricted by rules defined in the Commingling Exceptions (tcpeg0102m000) session.

Note: This field is applicable only if:

• The Project Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.
• The Restrict Commingling and Cost Peg Transfers per Item check box is selected in the Project Pegging Parameters (tcpeg0100m000) session.

Demand Pegged

If this check box is selected, demand peg is enabled for the item.

Note: This field is applicable only if the Demand Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.

Demand Pegging Type

The type of peg that determines the peg content used in demand and supply matching.

Allowed values

Order Based

This type is used to allocate inventory and hard peg orders to a specific demand order.

The demand peg specifies the sold-to business partner and the order/position/sequence.

Internal Reference Based

This type is used to allocate inventory and hard peg orders to specific internal references.

Customer Reference Based

This type is used to allocate inventory and hard peg orders to a specific customer reference.

The demand peg specifies the sold-to business partner and the reference.

Customer Location Based

This type is used to allocate inventory and hard peg orders to a specific customer location.

The demand peg specifies the sold-to business partner and ship-to business partner.

Customer Based

This type is used to allocate inventory and hard peg orders to a specific customer. The demand peg specifies the sold-to business partner.

Not Applicable

No pegging type can be selected.

Note: This field is applicable only if the Demand Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.

Use Unallocated Inventory

If this check box is selected, the unallocated inventory can be allocated and used to supply the demand order. Allocated inventory is used first to supply the demand. If unavailable, or an insufficient quantity is available, unallocated inventory is used.

Note: This field is applicable only if the Demand Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.

Subject to Trade Compliance

If this check box is selected, the item is subject to trade compliance checks. The setting of this check box is displayed in various sessions in Warehousing, Sales Control, and Procurement.

Note: This field is applicable only if:

• The Trade Management check box is selected in the Implemented Software Components (tccom0100s000) session.
• The Trade Compliance or End User Statements check box is selected in the Trade Management Parameters (tcgtc0100m000) session.

License Tracking

If this check box is selected, the specified engineering item must be demand or project pegged (mandatory or inherit).

Note: This field is applicable only if:

• The Project Pegging check box is selected in the Implemented Software Components (tccom0100s000) session.
• The End User Statements check box is selected in the Trade Management Parameters (tcgtc0100m000) session.

Material

The material using which the engineering item is manufactured. This field is only used for information.

Size

The default size of the engineering item. This field is only used for information.

Standard

The industrial standard used to produce or purchase the items. For example, NEN3140 or ISO9000. This field is only used for information.

Weight

The weight of engineering item of the selected item type and item group, expressed in the weight unit.

Weight Unit

The weight unit in which the weight of the item is expressed.

Product Type

The product type associated with the engineering item revision.

Product Class

The product class associated with the engineering item revision.

Product Line

The product line to which the engineering item revision is applicable.

Manufacturer

The code of the default manufacturer associated with the engineering item.

Selection Code

The selection code of the engineering item.

Item Signal

The signal associated with the engineering item.

Responsible Department

The code of the department responsible for assigning the required permission to maintain the item data.

Country of Origin

The code of the county where the engineering item is originally manufactured.

Environmental Compliance

Indicates the environmental compliance of the engineering item. The value in this field can be set by an external software application.

Allowed values

No Data

Pass

Pass with Exemptions

Fail

Conditional Fail

Partial Fail

Not Relevant

Not Applicable

Worldwide, various regulations exist to limit the use of hazardous chemical substances in electronic equipment preventing environmental pollution. Companies, in most cases producers of electronic equipment, are legally required to:

• Set up and control compliancy rules.
• Verify whether purchased, engineered, manufactured, and serviced material is compliant.
• Verify whether their work processes are compliant.

EAN Code

The default bar code used to register the items.

Harmonized System Code

The harmonized system code associated with the engineering item.

Critical Safety Item

If this check box is selected, the engineering item is a critical safety item.

Item Text

If a check mark is displayed, a text related to the engineering item revision exists.