General Company Data (tccom0502m000)

Use this session to maintain the company data such as the address, the country and the company language.

In the Implemented Software Components (tccom0500m000) session, you must indicate which packages, modules, and other functionality the company uses.

Field Information

Company

The company number.

Name

The name of the company.

Archive Company

If this check box is selected, the company is an archive company.

Archive-to Company

The archive company to which the company data is archived.

Note: This company is retrieved from the Archive-to Company field in the Implemented Software Components (tccom0500m000) session.

Introduction Date

The date and time that the company data is valid. The company data is valid up to the effective date of a more recent company data setting.

Country

The company's home country. For example, this is important for tax reporting.

Note: If you use a multicompany structure with an independent multicurrency system, you must select the same country for every company. The company's currency system is selected in the Companies (tcemm1170m000) session.
Mailing Number

The consignor's number. This number is the member number or customer number assigned to your organization by the carrier.

Language

The default language used for instructions and documents printed in the company.

Address Code

The default company address.

Tax Number of Own Company

The company's tax number that must be used on tax declarations and tax reports.

DUNS Number

The company's DUNS number.

Financials (TF)

If financial transactions must be logged, you must select this check box. The package must have been installed on your system.

If this check box is selected, LN generates integration transactions for all transactions that have an effect in Financials . You can only create logistic transactions if an active integration mapping scheme is available.

You must select the Financials (TF) check box if:

  • The company uses Financials .
  • The company uses Invoicing .
  • The company does not use Financials , but uses an external financial application. You must select the check box because financial transactions must be logged and passed on to the external application.
Freight Management (FM)

If the company uses Freight , you must select this check box. The package must have been installed on your system.

Project (TP)

If the company uses Project , you must select this check box. Project must have been installed on your system.

Warehouse Management (WH)

If the company uses Warehousing , you must select this check box. Warehousing must have been installed on your system.

Enterprise Planning (CP)

If the company uses Enterprise Planning , you must select this check box. Enterprise Planning must have been installed on your system.

Service (TS)

If the company uses Service , you must select this check box. Service must have been installed on your system.

Central Invoicing (CI)

If the company uses Invoicing , you must select this check box. You must also select the Financials (TF) check box. The packages must have been installed on your system.

Note: This check box is enabled only if the company is of the type Financial or Both, and Financials is implemented.
Order Management (TD)

If the company uses Order Management , you must select this check box.

The following must have been installed on your system:

  • CRM
  • Sales
  • Procurement
  • Pricing
Quality Management (QM)

If the company uses Quality , you must select this check box. The package must have been installed on your system.

Electronic Commerce (EC)

If the company uses Electronic Commerce , you must select this check box. The package must have been installed on your system.

Manufacturing (TI)

If the company uses Manufacturing , you must select this check box. The package must have been installed on your system.

Note: To select this check box you must have a license for Job Shop, Assembly or Repetitive Manufacturing purchased.

Tool Requirements Planning (TRP)

If the company uses the Tools Requirement Planning module, you must select this check box.

Note: This check box is enabled only if Manufacturing is implemented.
Project Control (PCS)

If the company uses the Project Control module, you must select this check box.

Note: This check box is enabled only if Manufacturing is implemented.
Engineering Revisions

If the company uses the LN functionality to handle revision numbers of engineering items, you must select this check box. If you do so, the items that the company uses in Manufacturing are revision controlled.

Note: 

This check box is only enabled if Manufacturing is implemented.

This check box is disabled if any of the following options is selected:

  • Warehouse Master Data Parameters (whwmd0100s000)

    Revision of Order Binding when Entering Receipts
  • Revision of Order Binding when Generating Outbound Advice
  • Revision of Order Binding when Manually Entering Outbound Advice
  • Engineering Revisions on Orders Active
  • Lot Control Parameters (whltc0100s000)

    Engineering Revisions in Lot Control

Repetitive Manufacturing (RPT)

If the company uses the Repetitive Manufacturing module, you must select this check box.

Note: This check box is enabled only if Manufacturing is implemented.
Product Configurator (PCF)

If the company uses the Product Configuration module, you must select this check box.

Note: This check box is enabled only if Manufacturing is implemented.
Unit Effectivity

If the company uses the unit effectivity module, you must select this check box.

People (BP)

If the company uses People , you must select this check box. People must have been installed on your system.

Object Data Management (DM)

If the company uses Data Management , you must select this check box. Data Management must have been installed on your system.

Infor SCM Planner

If you want to use the Infor SCM Planner integration for constraint-based advanced planning, you must install Infor SCM Planner and select this check box.

Note: 
  • This check box is enabled only if Enterprise Planning is implemented.
  • This check box is disabled if, in the Production Order Parameters (tisfc0100s000) session, both of the following apply:

    • Use of Shop Floor Warehouses is selected.
    • Move Allocation to Shop Floor Warehouse is set to At Generation or At Release.
Infor SCM Scheduler

If you want to use the Infor SCM Scheduler integration for finite capacity scheduling and batch-processing of production orders, you must install Infor SCM Scheduler and select this check box.

Note: 
  • This check box is enabled only if Manufacturing is implemented.
  • This check box is disabled if, in the Production Order Parameters (tisfc0100s000) session, Automatic Update Production Order Start Date is selected.
Order Promising Server

If you want to use the Order Promising Server integration to handle sales orders across multiple companies, you must install Order Promising Server and select this check box.

Note: This check box is enabled only if Infor SCM Planner is implemented.
Assembly (APL/ASC/ASL)

If the company uses Assembly Control , Assembly Planning or the Assembly Line Scheduling modules you must select this check box.

Note: 
  • To select this check box, you must have a license for Assembly purchased.
  • This check box is enabled only if Manufacturing is implemented.

EU Sales Listing

If you want LN to collect the data required for the sales listing, select this check box. The data is collected in the Accounts Receivable module of Financials .

EU Statistical Reporting

If you want LN to collect the data required for the Intrastat declaration, select this check box. If this check box is cleared, you cannot set up the Intrastat declaration data. From the moment when you save this data, LN logs the transaction data that is required to generate the EU Intrastat declaration.

EU Purchase Listing

If the company uses Customer Relation Management, you must select this check box.

Note: This check box is enabled only if Order Management is implemented.

Reference Designators

If you want to use reference designators, you must select this check box.

Note: This check box is enabled only if Manufacturing is implemented.

DAS 2 Reporting

To enable the DAS 2 report functionality, select this check box.

If this check box is cleared, the fields and sessions related to the DAS 2 report are not visible and you cannot set up or generate the DAS 2 report.

Customer Approval

If the company uses the customer approval procedure in Sales , you must select this check box.

Note: 

This check box is enabled only if both of the following are applicable:

  • Order Management is implemented.
  • Project Pegging is cleared.

Alternative Materials

If the company uses the functionality for alternative materials, you must select this check box.

Note: This check box is enabled only if Manufacturing is implemented.

Delivery Notes

If the company uses delivery notes, you must select this check box.

If you want to clear this check box, you must set the value of the Delivery Note field in the Warehouses (whwmd2500m000) session to Not Applicable for all warehouses defined for the current company.

Purchase/Sales Statistics (STA)

If the company uses the Statistics module in Sales and Procurement , you must select this check box.

Note: This check box is enabled only if Order Management is implemented.

Withholding Income Tax and Social Contribution

If the company registers and declares withholding tax and social contributions on purchase invoices, you must select this check box.

Note: 
  • This check box is enabled only if the company is of the type Financial or Both, and Financials is implemented.
  • This check box is disabled if invoices associated with withholding social contributions exist in Accounts Payable .

Chamber of Commerce ID

The company's registration number at the chamber of commerce.

Fiscal Identification

The company's fiscal identification for social contributions.

Note: If the Extended Registration Managementfield is set to Active and a Default Registration Type is defined for Fiscal IDs in the Global Registration Parameters (tctax2100m000) session, the own fiscal identification is defaulted from the registration master data using the Registrations by Financial Company (tctax2122m000) session when the same must be published on an external document.
Grand Total Rounding

If the company uses a grand total rounding factor, you must select this check box.

Note: This check box is enabled only if the company is of the type Financial or Both.

Tax

If the company uses the tax functionality, you must select this check box.

Note: If you do not want to use the LN tax functionality, clear this check box. In addition, you must perform the steps described in Deactivating tax functionality.

Manufacturer Part Numbers

If the company uses manufacturer part numbers in Procurement and Warehousing , you must select this check box.

Note: 

This check box is enabled only if either of the following is applicable:

  • Order Management is implemented.
  • Warehousing is implemented.

Ownership Internal

If this check box is selected, you can store inventory with an internal business partner as owner. This is applicable for inventory for which payment to the external business partner is already made by the purchase office, while the goods are not owned yet by the internal business partner of the warehouse.

You can specify internal ownership behavior in terms and conditions agreements of the Internal type.

Note: This check box is enabled only if Terms and Conditions is implemented.

Ownership External

If this check box is selected, you can keep track of customer and supplier owned inventory and planned inventory, which is required in certain vendor managed inventory (VMI) scenarios.

You can specify external ownership behavior in terms and conditions agreements of the Purchase or Sales type.

Note: 

This check box is disabled if any of the following applies:

  • In Warehousing , Quarantine Inventory is selected.
  • In Service , Depot Repair is selected.
  • In Procurement , Consignment Replenishment is selected.
  • In Procurement , Consignment Payment is selected for any purchase order type.
  • In Sales , Consignment Replenishment is selected.
  • In Sales , Consignment Invoicing is selected for any sales order type.

Customer Furnished Materials

If this check box is selected, the company makes use of customer furnished materials in the manufacture of standard items.

Note: This check box is enabled only if Ownership External is selected.

Subcontracting with Material Flow

If the company uses subcontracting with material flow in a manufacturer role, you must select this check box.

Demand Pegging

If the company uses demand pegging, you must select this check box.

Note: This check box is disabled if Project Pegging is selected.

VMI (supplier side)

If the company uses vendor managed inventory (VMI) in a supplier role, you must select this check box.

Note: 

This check box is enabled only if both of the following are applicable:

  • Terms and Conditions is implemented.
  • Ownership External is selected.

VMI (customer side)

If the company uses vendor managed inventory (VMI) in a customer role, you must select this check box.

Note: 

This check box is enabled only if both of the following are applicable:

  • Terms and Conditions is implemented.
  • Ownership External is selected.

Use Confirmation (Sales)

If the company requires sold quantities to be confirmed by the customer before an order can be approved or a schedule can be released to Warehousing , you must select this check box.

If this check box is selected, the confirmation fields (required quantity, confirmed quantity, confirmation date) are enabled on the sales order line and sales schedule line.

Note: 

This check box is enabled only if the Order Management (TD) check box is also selected in this session.

If this check box is selected, the same check box must be selected in (one of) the following sessions to use this functionality:

  • Terms and Conditions Lines (tctrm1120m000)
  • Sold-to Business Partner (tccom4110s000)
Use Confirmation (Purchase)

If the company requires ordered quantities to be confirmed by the supplier before an order or schedule can be released to Warehousing , you must select this check box.

If this check box is selected, the confirmation fields (required quantity, confirmed quantity, confirmation date, confirmation accepted) are enabled on the purchase order line and purchase schedule line.

Note: 

This check box is enabled only if Order Management is implemented.

If this check box is selected, the same check box must be selected in (one of) the following sessions to use this functionality:

  • Terms and Conditions Lines (tctrm1120m000)
  • Buy-from Business Partner (tccom4120s000)
Terms and Conditions (TRM)

If the company uses the Terms and Conditions module, you must select this check box.

Customer and Supplier List Italy

If this check box is selected, the customer and supplier list for Italy is present.

Business Partner Type

business partner type

Line of Business

line of business

Representative

The employee's code.

Creditor Identifier

The creditor identifier (CI) that is required in the SEPA direct debit file. The identifier entered here will be defaulted to the Direct Debit Mandate (tfcmg0127m000) session, where it can be overwritten.

Business Entity Identifier

The optional business entity identifier (BEI) for the direct debit company in the SEPA direct debit file.

Budget Control

To enable the Budget Control functionality, select this check box.

Note: This check box is enabled only if the company is of the type Financial or Both, and Financials is implemented.
Infor Configurator (CPQ)

If the company uses the Product Configurator (CPQ), you must select this check box.

Landed Costs

To enable landed costs functionality, select this check box.

Note: 

This check box is disabled if one of the following applies:

  • The company is of type Financial or Both, and landed cost lines are created in Financials.
  • The company is of type Logistic or Both, and landed cost lines are created in Logistics.

Functionality for Bulgaria

If this check box is selected, the functionality for Bulgaria is enabled.

You can then create the following tax reports:

  • DEKLAR (tax declaration)
  • POKUPKI (purchase register)
  • PRODAJBI (sales register)
  • PROTOKOL (specification of tax amounts, rate, and nature of the invoice by invoice line)

In addition to this, a dedicated electronic payment format for Bulgaria is available.

Project Pegging

If the company uses project pegging, you must select this check box.

Note: 
  • If the project pegging concept is activated in a logistic company, the financial companies that are part of the same group must have the project pegging concept activated.

This check box is enabled only if all of the following are applicable:

  • The Project package is implemented.
  • Demand Pegging is cleared.
  • Customer Approval is cleared.

Performance aspects

  • Effect on CPU: Yes
  • Effect on database growth: Yes

    The number of transactions registered in the Cost Transactions (tpppc2100m000) session increases.

Self-Billing (Purchase)

To enable self-billing functionality for purchase orders, select this check box.

Self-Billing (Sales)

To enable self-billing functionality for sales orders, select this check box.

SIA Company Code

The code assigned by the Società Interbancaria per l’Automazione (Interbank Association for Automation) to the current company.

This code is used in the following sessions:

  • Transfer Direct Debits (tfcmg4260s000)
  • Selected Trade Notes Receivable for Processing (tfcmg4526m000)
  • Audit Direct Debit Batch (tfcmg4255m000)
Costing Breaks

If the company uses costing breaks, you must select this check box.

Note: This check box is enabled only if Project Pegging is selected.

Supplier Stage Payments

If the company uses supplier stage payments, you must select this check box.

Note: 

This check box is enabled only if the Order Management (TD) check box is also selected in this session.

If you want to clear this check box, no actual stage payment lines or unprocessed stage payment history lines can be available for a Purchase Order Line or RFQ Response.

Show Hours in Costing

If this check box is selected, hours are not only logged, but also displayed in various costing sessions for the company.

If this check box is cleared, hours are logged, but not displayed in costing sessions.