Recording the quantitative test data

To record the quantitative test data:

  1. Select the inspection order.
  2. Select the Measurements tab (for item) or the Parts tab (for characteristics or test sequence)
  3. Select the value that you want to record or change. An Edit Measurement window is displayed.
  4. Specify the Document Number.
    Note: The Document Number field is enabled only if:
    • The Generate Document Number check box is cleared in the Quality Management Parameters (qmptc0100m000) session.
    • The Conformance Reporting check box is selected in the Inspection Order (qmptc1100m100) session
  5. Click Plus or Minus to increase or decrease the value in case a norm or nominal value is defaulted. You can also specify the measurement value manually.
    Note: 
    • The value can be reset to 0 using Reset.
    • The norm or nominal values if specified, is defaulted, if the Insert Default Values for Measurement option is selected in settings. Else, 0 is displayed. However, you can modify the value.
    • The units are based on the characteristic definition.
    • Increase or decrease of values are based on the measurement value type.
      • If the measurement value is an integer, you must increase or decrease the value by 1.
      • If the measurement value is a fraction, you must increase or decrease the value by the last decimal level value.
  6. Click Confirm to confirm and save the data or Dismiss to reject the data.