Usage Based - Trigger Sets (tsspc1533m600)
Use this session to view the triggers, that include Trigger Set and trigger set lines, linked to the Reference Activity specified in the header. All the triggers are not used in preventive maintenance.
- You can view this session only as a satellite session in the Where Used Reference Activity/Master Routing in Preventive Maintenance (tsspc1633m000) session.
- You can view this satellite session only if:
- The Where Used Reference Activity/Master Routing in Preventive Maintenance (tsspc1633m000) session is accessed for reference activities.
- The Use Item Counter Readings check box is selected in the General Service Parameters (tsmdm0100m000) session.
- This session is selected in the Personalize Satellite Tabs settings.
- To enable this session, you must set the Type of Scenario field to Usage Based Only or Time Based and Usage Based, and select the Where Used in Trigger Sets check box in the Usage Based group box, in the header.
Field Information
- Process Identification
-
The process ID based on which the data is populated in this session.
- Record Type
-
Indicates the record type for which the data is displayed for the reference activity displayed in the Where Used Reference Activity/Master Routing in Preventive Maintenance (tsspc1633m000) session.
Allowed values
- Time Based - Maintenance Scenarios
- Usage Based - Serialized Items
- Time Based - Rule Book
- Time Based - Item Service Data
- Time Based - Items
- Time Based - Serialized Items
- Usage Based - Maintenance Scenarios
- Usage Based - Rule Book
- Usage Based - Item Service Data
- Usage Based - Trigger Sets
- Usage Based - Trigger Set Rule Book
- Usage Based - Items
- Trigger Set
-
The code of the trigger set used for the maintenance scenario line.
Note: This value is defaulted from the Usage Based Scenario Line (tsspc1131m100) session. - Description
-
The description or name of the code.
- Measurement Type
-
The measurement type for which maintenance trigger is defined.
Allowed values
- Counter
- Condition Based Alphanumeric
- Condition Based Numeric
Note:- If the maintenance trigger type is Alphanumeric, the measurement type must be of the type Condition Based Alphanumeric.
- If the maintenance trigger type is Numeric, the measurement type must be of the type Counter or Condition Based Numeric.
- Description
-
The description or name of the code.
- Maintenance Trigger Type
-
The maintenance trigger set that holds the maintenance triggers applicable for the measurement type.
Allowed values
- Alphanumeric
- Numeric
- Norm Value (Numeric)
-
The numeric norm value that determines the moment when the maintenance is required for an item in a configuration.
- Trigger Set Line
-
The line number of the maintenance scenario trigger set.
- Description
-
The description or name of the code.
- Limit
-
The criteria (limit) based on which the maintenance scenario must be triggered.
Allowed values
- Below
- Above
- Between
- Outside
- Not Applicable
- Lower Limit Value
-
The value from which the maintenance must be triggered.
- Unit
-
The unit of the limit value.
- Upper Limit Value
-
The value up to which the maintenance must be triggered.
- Limit Period
-
The time period when the trigger is valid.
Allowed values
- After
- Before
- Between
- Not Set
- Lower Limit Period Value
-
The time period from when the trigger is valid.
- Upper Limit Period Value
-
The time period up to which the trigger is valid.
- Limit Period Unit
-
The unit of the limit period.
Allowed values
- Week
- Month
- Quarter
- Year
- Day
- Not Applicable
- Trigger Message
-
The code of the trigger message indicating that maintenance is required.
Note: For alphanumeric measurement values, LN defaults this message from the Alphanumeric Measurement Values (tsmdm0166m000) session. - Default Recommendation
-
The recommendation defined as the default value for the maintenance trigger.
Note: LN defaults this value only if the Default check box is selected in the Recommendations (tsmdm0167m000) session. - Default Follow-up Activity
-
The Reference Activity defined as the default follow-up activity of the maintenance notification.
Note: LN defaults this value from the Recommendations (tsmdm0167m000) session.