Service Planning Parameters (tsspc0100m000)
This session contains:
- A history list of parameter sets and their effective dates. The most recent parameter sets are at the end of the list.
- The current parameter set, at the top of the list (without an effective date). To view historical sets, double-click one of the historical parameter sets. You can use the Print Service Parameters (tsmdm0400m000) session to print and compare the parameter sets.
To view or change the current parameters, double-click the set without an effective date that appears at the top of the list. The Service Planning Parameters (tsspc0100m000) details session starts.
If you make changes and save the new parameter setting, LN performs the following actions:
- Adds the new set at the end of the history list.
- Updates the current set (at the top of the list).
Field Information
- General
-
- Introduction Date
-
The date and time from which the parameters are valid. The parameters are valid up to the effective date of the most recent parameter setting.
- Description
-
The description of the parameter set. For example, the reason why the previous setting was changed.
- Units
-
- Unit for Year
-
The Unit for Year can be used for the upperscale in the graphical planning tool. This unit is also used for manual input of a prediction's relative moments.
Note: The unit must be of physical quantity time and must have a conversion factor. - Unit for Day
-
The Unit for Day can be used for the lowest scale in the graphical planning tool. This unit is also used for manual input of a prediction's relative moments.
Note:- The unit must be a physical quantity of type time and must have a conversion factor.
- All relative moments of the prediction are converted to this unit, before stored in the database.
- Description
-
The description or name of the code.
- Unit for Tolerance Period
-
The unit must be a physical quantity of type time.
- Maintenance Scenarios
-
- General
-
- Number Group for Maintenance Scenarios
-
The default number group for maintenance scenarios.
- Series for Maintenance Scenarios
-
The default series defined for the maintenance scenarios number group.
- Use Master Routing
-
If this check box is selected, master routing data can be used to generate activities for service planning and concepts.
-
- Use Rule Book for Maintenance Scenarios
-
If this check box is selected, the application determines the maintenance scenario for the serialized item using the rule book, based on the defined search criteria. If this check box is cleared, you can manually add a maintenance scenario for the serialized item.
- Use Service Item Group
-
If this check box is selected, you can use the rules specified for the service item group of the serialized item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios check box is selected. - Use Serialized Item Group
-
If this check box is selected, you can use the rules specified for the serialized item group of the serialized item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios check box is selected. - Use Item
-
If this check box is selected, you can use the rules specified for the item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios check box is selected. - Use Project Segment of Item
-
If this check box is selected, you can use the rules specified for the project segment of the item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios and Use Item check boxes are selected. - Use Serial Number
-
If this check box is selected, you can use the rules specified for the serial number of the item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios and Use Item check boxes are selected. - Use Installation Group
-
If this check box is selected, you can use the rules specified for the installation group of the serialized item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios check box and Use Item or Use Service Item Group check boxes are selected. - Use Usage Class
-
If this check box is selected, you can use the rules specified for the usage class of the serialized item as a search criterion.
Note: This field is enabled only if the Use Rule Book for Maintenance Scenarios and Use Item check boxes are selected.
- Planned Activities
-
- Number Group for Planned Activities
-
The default number group for planned activities.
- Description
-
The description or name of the code.
- Series for Planned Activities
-
The default series defined for the planned activities.
- Description
-
The description or name of the code.
- Step Size for Activity
-
The number that defines the sequence for the successive steps that must be performed for activity.
Note: For example, if you enter the value 10, the numbers assigned to successive activities are 10, 20, 30, and so on. - Create Planned Inventory Transactions
-
If this check box is selected, LN allows you to create planned inventory transactions (PIT) for the planned activity material requirements, during the release of the planned activity.
- Status after Order Activity Cancellation
- Generate Planned Activities
-
- Generate Planned Activities in the Past Allowed
-
If this check box is selected, you can set the From Date in the Generate Maintenance Plan (tsspc2200m000) session to a date before the current date.
- Status Generated Planned Activity
-
The default status of the planned activities, that are generated when a maintenance plan is generated using the Generate Maintenance Plan (tsspc2200m000) session.
Allowed values
- Released
- Transferred
- Canceled
- Free
- Check Material Availability
-
If this check box is selected, material availability check can be performed for the for the planned activities.
Note: This field is enabled only if the Create Planned Inventory Transactions check box is selected. - Update for Released Orders
-
The option to update material availability for the released orders.
Allowed values
- Manual
-
The work order is not generated automatically when saving a new part maintenance line. The Create Work Order option must be used to generate the work order.
- Automatic
-
The work order is generated automatically when saving a new part maintenance line and you cannot view the Create Work Order option.
- Interactive
-
The work order is generated based on the option selected in the message displayed while saving a new part maintenance line.
Note: This field is enabled only if the Check Material Availability check box is selected.
- Generate Planned Activities - Department
-
- Priority 1
-
The first priority to set the default department for the generation of planned activities.
Allowed values
- Reference Activity
- Serialized Item
- Installation Group
- Item - Service
- Not Applicable
- Priority 2
-
The second priority to set the default department for the generation of planned activities.
Allowed values
- Reference Activity
- Serialized Item
- Installation Group
- Item - Service
- Not Applicable
- Priority 3
-
The third priority to set the default department for the generation of planned activities.
Allowed values
- Reference Activity
- Serialized Item
- Installation Group
- Item - Service
- Not Applicable
- Priority 4
-
The fourth priority to set the default department for the generation of planned activities.
Allowed values
- Reference Activity
- Serialized Item
- Installation Group
- Item - Service
- Not Applicable
- Generate Planned Activities - Requirements
-
- Copy on Status
-
The planned activity status which determines when the resource requirements are created.
Allowed values
- Released
- Transferred
- Canceled
- Free
- Generate Planned Activities - Serialized Item Start Date
-
- Priority 1
-
The first priority to set the earliest date for the generation of planned activities for serialized items.
Allowed values
- Installation Date Serialized Item
- Delivery Date Serialized Item
- Status Start Date Installation Group
- Creation Date Serialized Item
- Not Applicable
- Priority 2
-
The second priority to set the earliest date for the generation of planned activities for serialized items.
Allowed values
- Installation Date Serialized Item
- Delivery Date Serialized Item
- Status Start Date Installation Group
- Creation Date Serialized Item
- Not Applicable
- Priority 3
-
The third priority to set the earliest date for the generation of planned activities for serialized items.
Allowed values
- Installation Date Serialized Item
- Delivery Date Serialized Item
- Status Start Date Installation Group
- Creation Date Serialized Item
- Not Applicable
- Priority 4
-
The fourth priority to set the earliest date for the generation of planned activities for serialized items.
Allowed values
- Installation Date Serialized Item
- Delivery Date Serialized Item
- Status Start Date Installation Group
- Creation Date Serialized Item
- Not Applicable
- Generate Planned Activities - Serialized Item End Date
-
- Use Life Cycle
-
If this check box is selected, you cannot generate the planned activities after the end date (life cycle) of the serialized item.
- Territory Planning
-
- General
-
- Number Group for Territory Planning
-
The default number group for territory planning.
- Series for Territory Planning
-
The default series defined for the territory planning number group.
- Number of Visits per Day
-
The average number of visits a service engineer can perform in one day.
- Unit
-
The unit in which the number of visits per day is expressed.
- Calculation
-
- Use Provider for Distance Calculations
-
If this check box is selected, LN uses web service to calculate distance/travel time.
- Provider
-
The information provider to calculate travel/distance time.
Allowed values
- Bing Maps
- Google Maps
- Not Applicable
Note: This field is enabled only if Use Provider for Distance Calculations check box is selected. - Create Log File
-
If this check box is selected, LN generates a log file on the server. This log file helps the user (or Infor Support) to detect and analyse the problems.