Operation Assignments (tiapl1510m000)

Use this session to specify the line stations where the operations are executed, together with the effective date, location, and man occupation of the operations.

If operations are defined in LN, the operations are defined in the Operations (tiapl1500m000) session.

If the operations are not defined in LN, but delivered by an external source, you cannot change the operation assignments, but only display these operations in that session.

The current session is enabled for data entry through the Operation Assignment (tiapl1110s000) session, if the following conditions apply:

Your current company is defined as the master company in the Assembly Planning Parameters (tiapl0100s000) session.
The External Assembly Parts and Operations check box is cleared, or the Test Mode check box is selected in the Assembly Planning Parameters (tiapl0100s000) session.

If the operation assignments are changed, you must run one of the following sessions to process the changes:

Refresh and Freeze Assembly Orders (tiapl3203m000)
Refresh and Freeze Assembly Orders (Multiple Bshells) (tiapl3204m000)

Note: Using the Assembly Inspection Protocol option from the Reference menu, you can access the Assembly Inspection Protocol (tiapl1120m000) session that enables you to set up an inspection protocol for the process variables that are linked to an operation assignment.

Field Information

Operation

The code of the operation that is linked to the line station.

Operations are either defined in the Operations (tiapl1500m000) session, or delivered from an external source, which depends on the selection of the External Assembly Parts and Operations parameter in the Assembly Planning Parameters (tiapl0100s000) session.

Line Station

The code of the line station where the operation is performed.

Sequence Number

A number that distinguishes assignments that are defined on the same combination of line station and operation.

Effective Date

The date when the operation assignment becomes effective.

Note:

Effectivity overlap is not permitted.
The Effective Date must fall before the Expiry Date.
If an exception is used, the operation assignment is effective if both the date range and the exception are valid.

Expiry Date

The date when the operation assignment expires.

Note:

Effectivity overlap is not permitted.
The Effective Date must fall before the Expiry Date.
If an exception is used, the operation assignment is effective if both the date range and the exception are valid.