Purchase Order Lines (tdpur4101m000)

Use this session to specify and maintain purchase order lines.

Order line details for a purchase order line can be specified in the Purchase Order Line (tdpur4601m000) session.

Order line details are created when:

The purchase order line is split
A backorder is created for the purchase order line

Field Information

Order Line

The number of the purchase order.

Status

The status of the purchase order.

Allowed values

Created: The order is waiting for commingling or approval.

Note: Commingling is not applicable for Subcontracting Procurement Orders (SPO)/Equipment Procurement Orders (EPO).
Approved: The order is approved.
Modified: The order is modified after approval because order lines were added or changed. Therefore, the order must be re-approved.
Sent: The order is sent to the supplier and is waiting to be received.
In Process: The order can be at various stages of the receipt procedure.

Note: The receipt procedure is not applicable for Subcontracting Procurement Orders (SPO)/Equipment Procurement Orders (EPO). The payment procedure (AFP) is only applicable.
Blocked: The order is blocked. The order procedure cannot continue until the block is released.
Canceled: All lines in the order are canceled.
Closed: All steps are executed in the procedure for the purchase order type in Procurement .
Released: A technical/temporary status during the release to warehousing activity.; Note: This status is not applicable for Subcontracting Procurement Orders (SPO)/Equipment Procurement Orders (EPO).

Buy-from BP

buy-from business partner

Line

position number of an order line

Order Line

This field determines what kind of line this order line is.

Allowed values

The line type can be one of the following:

Total
The order line is split up in several order line details. The totaled quantities and amounts are visible in this line.
Order Line
This line is a normal line. The line is created manually or is generated automatically.

Item

item

Note:

If the warehouse is WMS controlled:

And the Inbound BOM/List Items check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session, you cannot enter a list item of the type kit in this field.
This order is a return order and the Outbound BOM/List Items check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session, you cannot enter a list item in this field.
And the Serials in Inventory check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session, you cannot enter a serialized item for which the Serials in Inventory check box is selected in the (whwmd4100s000) session.
And the Serials Not in Inventory check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session, you cannot enter a serialized item for which the Serials in Inventory check box is cleared in the (whwmd4100s000) session.
And the Lots Not in Inventory check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session, you cannot enter a lot controlled item for which the Lots in Inventory check box is cleared in the (whwmd4100s000) session.

Item Cross Reference

The alternative way of communicating with the business partner about items.

Allowed values

ICS: item code system
MPN: manufacturer part number
Not Applicable: No item cross reference is applicable.

Default value

This field is defaulted from the Item Cross Reference field of the Buy-from Business Partner (tccom4120s000) session.

Item Code System

The item code system's code. The item code system is used to search for an item in an alternative way, for instance by the buy-from business partner's item code.

Note: You can only define this field if the Item Cross Reference field is set to ICS.

Cross Reference Item

The item code that is used to indicate the item in the Item field.

The Item Cross Reference field determines the item code that you can select.

ICS
You can select a code in the item code system from the Item Code System - Items (tcibd0104m000) session.
MPN
You can select a manufacturer part number (MPN) from the Manufacturer Part Numbers (tdipu0145m000) or Items by MPN (tdipu0149m000) session.

Note: The MPN must have the status Approved on the Order Date.

Preferred Manufacturer Part Number

The preferred manufacturer part number (MPN) for the item.

Manufacturer

The item's manufacturer, or the manufacturer that is linked to the manufacturer part number (MPN).

Manufacturer Item

The item code used by the manufacturer to identify the item specified.

Engineering Item Revision

The revision of the engineering item.

Effectivity Unit

effectivity unit

Note:

If a purchase order is created automatically, the effectivity unit of the planned purchase order from LN Enterprise Planning is defaulted to the current field.
When a purchase order is created, either manually or automatically from Enterprise Planning, LN checks whether the purchase business partner is valid for the effecivity unit on the purchase order line.
If the warehouse is WMS controlled, and the Effectivity Units check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session, you cannot enter an effectivity unit in this field.

Project

The project code for which the item is required.

Subcontracted

If this check box is selected, operation subcontracting, item subcontracting, or service subcontracting is applicable for the item.

Subcontracting Reference

A reference that is sent by the manufacturer to the subcontractor to enable the subcontractor to link the subcontracting purchase order to the supplied materials. The subcontractor stores the subcontracting reference in its specification as allocated to reference

Note: This field is filled with the subcontracted purchase order/position/sequence number.

Required Quantity

The ordered quantity that is required by the supplier.

Note: Enterprise Planning uses the ordered quantity and required ordered quantity, as stored in the planned inventory transactions, to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Required Quantity Unit

The unit in which the Required Quantity is expressed.

Required Quantity

The ordered quantity that is required by the supplier, expressed in the inventory unit..

Origin

The origin of the purchase order line.

Allowed values

EP

The order has resulted from the execution of the Transfer Order Planning (cppat1210m000) session in Enterprise Planning .

Sales

The order has resulted from a direct delivery or cross-docking order and is generated from the Transfer Purchase Order Advice (whina3212m000) session in Warehousing .
The order has resulted from the execution of the Generate Purchase Orders (tdsls4241m000) session

Service

The order has resulted from the execution of the Service Order Resource Planning (tssoc2260m000) session in Service .

Requisition

The purchase object has resulted from the execution of the Convert Purchase Requisitions (tdpur2201m000) session.

Copy from Actual Order

The order has resulted from the execution of the Copy Purchase Order (tdpur4201s000) session.

Copy from Order History

The order has resulted from the execution of the Copy Purchase Order (tdpur4201s000) session.

Assembly

The order has resulted from the execution of the Generate WIP Transfer (tiasc7200m000) session in Manufacturing .

Commingling

The order has resulted from the execution of the Commingle Purchase Orders (tdpur4210m000) session.

Maintenance

The order has resulted from the execution of the Plan Work Orders (tswcs3200m000) session in Service .

Warehousing

The order has resulted from the execution of one of the following sessions in Warehousing :

Transfer Purchase Order Advice (whina3212m000)
Generate Orders (KANBAN) (whinh2200m000)
Generate Orders (TPOP) (whinh2201m000)
Generate Orders (OCB) (whinh2205m000)

Contract

The order has resulted from the execution of the Generate Purchase Orders (tdpur3204m000) session, or the RFQ has resulted from the execution of the Generate RFQs from Contracts (tdpur3201m000) session.

RFQ

The order has resulted from the execution of the Convert RFQs (tdpur1202m000) session.

Manual

The purchase object is manually specified in the relevant session.

External

The purchase object is created by an application other than LN.

Job Shop Control

The order or requisition has resulted from the generation of a subcontracted service for a production order in Manufacturing . This origin is applicable in case of operation subcontracting.

Routing

The purchase requisition has resulted from the generation of a subcontracted service for a routing operation in Manufacturing . This origin is applicable in case of operation subcontracting.

Subcontracting Purchase Order

The purchase supply order or schedule is generated in the Purchase Order Material Supply Lines (tdpur4116m000) session or the Generate Supply Orders for Subcontracting (tdpur4216m000) session. The purchase order/schedule contains supply lines to order the required material from the buy-from business partner who delivers the goods to the administrative warehouse (supply-to warehouse), which represents the subcontractor's shop floor warehouse.

Project

The order has resulted from the execution of the Transfer Planned PRP Purchase Orders (tppss6230m000) session in Project .

Warehousing Receipt

The order is generated automatically for an unexpected warehouse receipt. As a result, the goods can be received against the generated purchase order.

Warehousing Receipt purchase orders can only be generated if the Generate Order for Unexpected Warehouse Receipt check box is selected for the item and business partner in the Items - Purchase Business Partner (tdipu0110m000) session.

Purchase Payment

The order is generated automatically for a consumption of consigned inventory that cannot be linked to an existing purchase order or schedule.

This applies in the following situations:

The purchase order type is a Consignment Replenishment order type, as defined in the Purchase Order Types (tdpur0194m000) session.
The Consigned check box is selected for the purchase schedule in the Purchase Schedules (tdpur3110m000) session.
Consumption is for an adjustment order.
Consigned inventory is replenished by means of a Purchase (Manual) warehousing order.
Item inventory is handled by component, consumption is by component.

If no receipt is available yet, a receipt is generated in Purchase Control based on the number group for warehouse receipts, and a purchase payable receipt is created.

Confirmed Quantity

The ordered quantity that is confirmed by the supplier.

Note:

This field can only be filled if the Use Confirmation (Purchase) check box is selected in the Implemented Software Components (tccom0100s000) session.
This field is not applicable in case of operation subcontracting and for orders with the Subcontracting Purchase Order origin.
Enterprise Planning uses the ordered quantity and required ordered quantity, as stored in the planned inventory transactions, to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Confirmed Quantity Unit

The unit in which the Confirmed Quantity is expressed.

Confirmed Quantity

The ordered quantity that is confirmed by the supplier, expressed in the inventory unit.

Note:

This field can only be filled if the Use Confirmation (Purchase) check box is selected in the Implemented Software Components (tccom0100s000) session.
This field is not applicable in case of operation subcontracting and for orders with the Subcontracting Purchase Order origin.
Enterprise Planning uses the ordered quantity and required ordered quantity, as stored in the planned inventory transactions, to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Confirmation Accepted

If this check box is selected, the Confirmed Quantity is accepted by the buyer. No further negotiations are possible with the supplier.

Note:

This field can only be filled if the Use Confirmation (Purchase) check box is selected in the Implemented Software Components (tccom0100s000) session.
If a confirmed quantity of zero is accepted, the order line is automatically canceled.

Minimum Required Quantity

The ordered quantity that is at least required by the planner. This field is used for information purposes only.

Note: This field can only be filled if the Use Confirmation (Purchase) check box is selected in the Implemented Software Components (tccom0100s000) session.

Subcontractor Site

The Site of the subcontractor.

Note:

This field is applicable only when

Resource by Site is active.
manufacturing process is enabled.
Subcontracted option is selected.

The Valid Site and Procurement Data fields are enabled.

Minimum Required Quantity Unit

The unit in which the Minimum Required Quantity is expressed.

Minimum Required Quantity

The ordered quantity that is at least required by the planner, expressed in the inventory unit. This field is used for information purposes only.

Note: This field can only be filled if the Use Confirmation (Purchase) check box is selected in the Implemented Software Components (tccom0100s000) session.

Ordered Quantity

The ordered quantity expressed in the purchase unit.

This field is filled with the value of the:

Confirmed Quantity field if this confirmed quantity is greater than zero.
Required Quantity field if the Confirmed Quantity is equal to zero.

Note: Except for cost and service items, the ordered quantity cannot be zero.

Purchase Unit

purchase unit

Ordered Quantity

The ordered quantity expressed in the inventory unit.

This field is filled with the value of the:

Confirmed Quantity field if this confirmed quantity is greater than zero.
Required Quantity field if the Confirmed Quantity is equal to zero.

Note: Except for cost and service items, the ordered quantity cannot be zero.

Price

purchase price

Note:

If the Payment field is set to No Payment, the price is zero.
If the Material Pricing in Procurement check box is selected in the Material Price Parameters (tcmpr0100m000) session, this price can include material prices.

Price Origin

The origin of the price.

Allowed values

Item Purchase Data
Item Sales Data
Item Service Data
Supplier Price Book
Default Price Book
Price Structure
Not Applicable
External
Consumption
Generic Price List
Manual
Project Cost Object
Contract
Variant

Price Matrix

The matrix definition of the price matrix, if the Price Origin is set to Price Structure.

Price Matrix Sequence

matrix priority

Contract

purchase contract

You can click:

Unlink Contract, to unlink an already linked contract.
Link Contract, to link a contract to the purchase order line.

Contract Position

position number of a contract line

Contract Purchase Office

The purchase office related to the contract.

Contract Ignored

If this check box is selected, a valid contract is present, but it is not linked to the order line.

This check box is selected if one of the following is applicable:

Multiple contracts are offered for selection, but no contract is linked to the order line.
A previously linked contract is manually unlinked from the order line.

Note: If a contract is automatically unlinked due to field updates, this check box is cleared.

Material Price

The purchase order line's total material price.

Price excluding Material Price Surcharges

The purchase order line's initial price.

Material Price Surcharges

The total of all material price surcharges for the purchase order line.

All Materials have Actual Prices

If this check box is selected, for all materials that are linked to the purchase order line, material actual prices are available.

Multi Level Discount

If this check box is selected, a multi level discount is applied to the line.

Currency

purchase currency

Purchase Price Unit

purchase price unit

Order Amount

The total order amount. This is a cumulative value of all the purchase line amounts after discounts are deducted.

Note: When the ordered quantity on a backorder line is changed, this change is carried through in the order amount. However, when back order lines are canceled or deleted, the original ordered quantity still determines the order amount.

Invoice by Stage Payments

If this check box is selected, the item must be invoiced by stage payments.

Note: The application uses this sequence to default the check box setting:

The Purchase Order session.
The Items - Purchase Business Partner (tdipu0110m000) session.
The Invoice-from Business Partners (tccom4522m000) session
The Items - Purchase (tdipu0101m000) session.

If this check box is selected, the following are applicable:

For all linked detail and backorder lines, the tax data and purchase type are the same
These fields are empty and unavailable:
- Payment Agreement
- Payment Terms
- Payment
- Self-Billing
- Extension
- Cost Component
- Invoice
- Invoice Date
- Invoiced Quantity
- Invoice Amount

Note: When a supplier stage payment line or a receipt is linked to the purchase order line, this check box is no longer available.

On the appropriate menu, you can start the Supplier Stage Payments (tdpur5120m000) session in which you can view, enter, and maintain the stage payments.

If the For Commingling check box is also selected in this session, you must first commingle the purchase order line before you can specify stage payments in the Supplier Stage Payments (tdpur5120m000) session.

Default value

This field is defaulted from the Items - Purchase Business Partner (tdipu0110m000) session or the Items - Purchase (tdipu0101m000) session.

Picture

The item's picture, which is defaulted from the Picture field in the Items (tcibd0501m000) session.

Open Balance

open balance

Note: The open balance is not changed when a back order is created. However, when this back order is deleted or canceled, the open balance is reduced with the back order amount.

Currency

The currency in which the open balance is expressed.

Buyer

buyer

Credit Limit

credit limit

Currency

The currency in which the credit limit is expressed.

Canceled

If this check box is selected, this purchase order line is canceled.

Cancellation in Process

If this check box is selected, this purchase order line cannot be canceled because it includes one or more supplier stage payment lines with the Released or Invoiced status. When these lines receive the Processed status, the purchase order line is canceled.

For purchase order lines with this check box selected, you can specify correction stage payment lines in the Supplier Stage Payments (tdpur5120m000) session to credit the invoiced amounts.

Blocked

If this check box is selected, the purchase order line is blocked.

Specification

If this check box is selected, a specification is linked to the purchase order line.

Standard Description

If this check box is selected, the standard item description is printed on the order line. If an order line text is also present, the standard item description precedes the printout of the order line text.

If this check box is cleared, only the order line text, if present, is printed on the order line.

Order Line Text

If this check box is selected, a text is linked to the order line.

Subject to Trade Compliance

If this check box is selected, global trade compliance applies to the line.

Note: This field is available only if the Import check box is selected in the Trade Management Parameters (tcgtc0100m000) session.

Peg Distribution

If this check box is selected, a peg distribution is linked to this Purchase Order Line.

Note: Manual changes in this session can affect the linked peg distribution. If this is the case, and if the Manual Project Peg Modification check box is selected in the Project Pegging Parameters (tcpeg0100m000) session, a window is displayed in which you must specify the change reason. The project peg changes and the reason codes are logged in the Cost Peg Audit History (tpctm2500m000) session.

Detail Lines Present

If this check box is selected, the order line is split up into multiple receipt lines. If you click Order Line Details, you can view the various receipt lines.

For example, you can use this functionality to divide orders for large quantities into several receipts, without the need to generate separate orders for each receipt.

Budget Exception

If this check box is selected, the budget check has failed for the order line.

To continue with the purchase order procedure, you must first resolve the budget exception. You can, for example, change the line amount or the linked budget account distribution (BAD) in the Budget Account Distribution (tcbgc1100m000) session.

Note:

This check box can only be selected if the following are applicable:

The Check Available Budget check box is selected on the Purchase Orders tab of the Budget Control Policy (tfbgc0110m000) session.
Insufficient budget is available for the checked line.
The When Budget is Exceeded field is set to Block in the Budget Control Policy (tfbgc0110m000) session.

For Commingling

If this check box is selected, the purchase order line is waiting for commingling. You must commingle and approve the commingled purchase order line.

Note:

This check box is only available if the Commingling for Manual check box is selected in the Purchase Order Parameters (tdpur0100m400) session and the For Commingling check box is selected for the purchase order line item in the Items - Purchase Business Partner (tdipu0110m000) session.
If the Origin is EP and the Peg Distribution check box is selected, you cannot select the current check box.

Details

If this check box is selected, the order line is split up into multiple line details. If you click Order Line Details on the appropriate menu, you can view the various line details in the Purchase Order Line (tdpur4601m000) session.

Line details are used to divide orders for large quantities into several receipts without the need to generate separate orders for each receipt.

Linked Data

If this check box is selected, at least one order is linked to the purchase order line.

Click Purchase Order Line - Linked Information on the appropriate menu to view the linked order(s) in the Purchase Order Line - Linked Information (tdpur4502s000) session.

Approved

If this check box is selected, the purchase order line is approved by an authorized approver.

Note: LN clears this check box if you change any price related information on the purchase order.

Discount %

The discount percentage for the order line.

Note: Several levels of discounts can exist. If the first level of discount is a percentage, as displayed in the Line Discounts (tdpcg0200m200) session, this field is filled. If the first level of discounts is an amount, this field is empty and the Discount Amount field is filled.

Discount Amount

The discount amount for the order line.

Note:

Several levels of discounts can exist. If the first level of discount is an amount, as displayed in the Line Discounts (tdpcg0200m200) session, this field is filled. If the first level of discounts is a percentage, this field is empty and the Discount % field is filled.
The discount amount is calculated for each unit on the order line. As a result, if the discount amount is two and the order quantity is ten, the discount amount is 20.

Discount Origin

The origin of the discount.

Allowed values

Price Book Discount Structure: The discount originates from the price book to which a discount schedule is linked.
External: The discount originates from an external package.
Manual: The discount is manually entered.
Contract: The discount originates from a contract.
Discount Structure: The discount originates from a Pricing Control (PCG) matrix of the type discount matrix. For more information, refer to Setting up a discount matrix.
Not Applicable

Discount Code

discount code

Discount Matrix

The matrix definition of the discount matrix, if the Discount Origin is set to Discount Structure.

Discount Matrix Sequence

matrix priority

Gross Amount

gross amount

Line Discount %

The total discount amount expressed as a percentage of the (gross) order amount.

The Line Discount % is calculated as follows:


               Line Discount Amount / (order quantity * price) * 100%

Line Discount Amount

order line discount amount

Note: The order line discount used in this formula, is the total of the level of discounts entered in the Line Discounts (tdpcg0200m200) session.

Order Amount

net order-line amount

Note: The order line discount used in this formula, is the total of the level of discounts entered in the Line Discounts (tdpcg0200m200) session.

Order Discount %

order discount

Order Discount Amount

The total of order line discount amounts for the order.

Order Date

order date

Note:

This date can be manually changed to a date in the past or in the future.
If the Log Financial Economic Transactions field in the Procurement Parameters (tdpur0100m000) session has the value Standard Cost, the order date cannot be after the current date.
If the purchase order is a counter order, the order date is used to define the standard cost. If no standard cost is found, the order line cannot be saved.

Default value

Manual order entry
The current (creation) date.
Automatic order generation
The date as specified in the Use Creation Date as Order Date when generating Purchase Order field of the Purchase Order Parameters (tdpur0100m400) session.

Order Confirmation Date

order confirmation date

Receipt Date for Pricing

The receipt date that is used to retrieve the standard cost for the order line.

This date can be one of the following:

The Changed Receipt Date.
If the Changed Receipt Date is not filled, the Confirmed Receipt Date.
If the Confirmed Receipt Date is not filled, the Planned Receipt Date.

This date cannot precede the Order Date.

Note:

This field is used to retrieve the standard cost for the order line if the following conditions are met:

The Item Type in the Items (tcibd0501m000) session is not set to:
- Cost
- Service
- List
The purchase order is not a subcontracting order.
The Project field is empty.
The inventory-valuation method is set to Standard Cost in the Inventory Valuation Methods (whina1100m000) session.

If all of these conditions are met and LN cannot retrieve the standard cost, you cannot save the order line.

Determining

If this check box is selected, the selected order line is taken into account when the total order value is calculated to apply total order discounts to orders.

Eligible

If this check box is selected, LN applies the calculated order discount percentage to the selected order line.

Vendor Rating

If this check box is selected, the purchase order line is included when vendor rating is carried out.

Ship-from BP

ship-from business partner

Address

The ship-from business partner's address.

Contact

The ship-from business partner's contact person.

Full Name

The contact's full name.

Extra Intrastat Info

Extra Intrastat info

Planned Receipt Date

planned receipt date

Note: If Purchase Control is responsible for transportation and consequently a freight order is generated from the purchase order line, the Planned Receipt Date must be considered as the planned unload date, the date when the goods must be available in the warehouse.

Minimum Required Receipt Date

The receipt date that is at least required by the planner. This field is used for information purposes only.

Received Quantity

The received quantity expressed in the purchase unit.

Received Quantity

The received quantity expressed in the inventory unit.

Receipt Amount

The net line amount for a specific receipt of goods. The net line amount excludes the tax and order discount. The net line amount is expressed in the order currency.

The calculation is as follows:

LN calculates and rounds the total order discount amount.
LN calculates and rounds the order discount amount per order line.
LN calculates the net line amount as follows:

(received quantity * price) - order discount amount per order line

Inventory Unit

inventory unit

Generate Freight Orders from Purchase

If this check box is selected, a freight order can be generated from the purchase order line.

Carrier/LSP

carrier

Note:

If you enter a carrier in this field and a warehousing order is generated from the purchase order, this field is defaulted to the Carrier/LSP field of the Warehousing Orders (whinh2100m000) session. You can only update the carrier in the current session and not in Warehousing .
If you leave this field empty, you can enter/update a carrier in Warehousing .

Carrier Binding

carrier binding

Note:

If you select this check box and a warehousing order is generated from the purchase order, the Carrier/LSP Binding check box in the Warehousing Orders (whinh2100m000) session is selected as well. You can only maintain this check box in the current session and not in Warehousing .
If you clear this check box, you can maintain this check box in Warehousing .

Route

route

Note:

If you enter a route in this field and a warehousing order is generated from the purchase order, this field is defaulted to the Route field of the Warehousing Orders (whinh2100m000) session. You can only update the route in the current session and not in Warehousing .
If you leave this field empty, you can enter/update a route in Warehousing .

Freight Service Level

freight service level

Enter a service level to ensure that the same service level is used in the freight order as in the purchase order.

Note:

If you enter a service in this field and a warehousing order is generated from the purchase order, this field is defaulted to the Freight Service Level field of the Warehousing Orders (whinh2100m000) session. You can only update the service level in the current session and not in Warehousing .
If you leave this field empty, you can enter/update the service level in Warehousing .

Planned Load Date

planned load date

Note: If the purchasing company is responsible for transportation, this is the date on which suppliers must be ready with the goods on their site, so that the goods can be picked up at the suppliers' site.

Tax

Tax Classification

tax classification

Default value

This field is defaulted from the purchase order header.

Exempt

If this check box is selected, tax exemption applies.

Note:

If the Tax Exempt Level parameter in the Tax Parameters (tctax0100m000) session is set to:

Limited and you select this check box manually, the Tax Code is defaulted from the Exempt Purchase field of the Tax Handling (tctax0138m000) session. If you clear this check box manually, the tax code is not changed.
Extended and you select this check box manually, the Tax Code is not changed. If you clear this check box manually, the Exemption Reason and Exemption Certificate fields are cleared and disabled.

Tax Country

The country used for tax purposes.

Own Tax Number

tax ID

Tax Code

The tax code that applies to the purchase order line.

BP Tax Country

The country in which the business partner has the tax ID.

BP Tax Number

The business partner's tax ID.

Note: The business partner's tax ID is date effective. To determine and display the correct tax ID for the business partner, LN uses the planned receipt date.

Exemption Reason

The reason why your own company is exempt from sales tax.

Note:

This field only applies if the Tax Exempt Level parameter is set to Extended in the Tax Parameters (tctax0100m000) session.
This field is defaulted from the method that is used to retrieve tax details, as defined in the Search Sequence Tax Libraries group box of the Tax Parameters (tctax0100m000) session.
The reason code must be of the Tax Exemption type and must be date effective, as valuated by the Order Date.

Exemption Certificate

Your own exemption certificate.

Note:

LN prints the exempt reasons on the invoices.
This field only applies if the Tax Exempt Level parameter is set to Extended in the Tax Parameters (tctax0100m000) session.
This field is defaulted from the method that is used to retrieve tax details, as defined in the Search Sequence Tax Libraries group box of the Tax Parameters (tctax0100m000) session.

Landed Cost

Landed Costs Classification

landed costs classification

Landed Cost Amount

landed costs

Stage Payment Amount

The total amount of supplier stage payments linked to the purchase order line.

Note: On the appropriate menu, you can click Supplier Stage Payments to view the stage payments in the Supplier Stage Payments (tdpur5120m000) session.

Invoice

invoice number

Invoice Date

invoice date

Invoiced Quantity

The invoiced quantity for the purchase order line, expressed in the purchase unit.

Note: The invoiced quantity is increased if purchase order lines are processed in the Process Delivered Purchase Orders (tdpur4223m000) session.

Invoiced Quantity

The invoiced quantity for the purchase order line, expressed in the inventory unit.

Note: The invoiced quantity is increased if purchase order lines are processed in the Process Delivered Purchase Orders (tdpur4223m000) session.

Invoice Amount

The invoiced amount for the purchase order line, expressed in the order currency.

Note: The invoiced amount is increased if purchase order lines are processed in the Process Delivered Purchase Orders (tdpur4223m000) session.

Self-Billing

If this check box is selected, self-billing is used for purchase order lines that you issue to the buy-from business partner.

If this check box is cleared, the purchase invoice is created by the buy-from business partner and received by your company.

Invoice after

You can indicate for a purchase order line when a self billed invoice can be generated.

Inspection
Self bills can be generated after the goods are inspected and approved.
Receipt
Self bills can be generated after the goods are received or consumed.

Self-Billing Date Type

If the Self-Billing check box is selected, use this field to define on which date the self-billing payments are based. Either the receipt date or the shipping date can be used as the invoice date on self-billed invoices.

Self-Billing Method

If the Self-Billing check box is selected, you must select a self-billing method, which determines how self-billing is carried out.

The self-billing method determines, among other things, the criteria for composing the invoice, the invoicing interval, the output medium, and so on.

Stage Payment Schedule Set

The code of the stage payment schedule used for the purchase order line.

Note:

This field is displayed only if the Supplier Stage Payments check box is selected in the Implemented Software Components (tccom0100s000) session.
This field is applicable only if:
- The Invoice by Stage Payments check box is selected.
- The Order line type is set to a value other than Detail or Backorder
- The Invoice by Stage Payments check box is cleared for the related purchase order..
You cannot modify the value in this field if:
- The order line is status is set to Cancelled.
- The purchase order is an Internal change request.
- Receipt is done for the order line.
- At least one stage payment line exists that is not Planned anymore.
The application uses this sequence to default the check box setting:
1. The Items - Purchase Business Partner session.
2. The Invoice-from Business Partners (tccom4522m000) session

Payment

Use this field to define the payment between the purchase office, which issues the purchase order, and the supplier.

Note:

This field is set to Pay on Receipt if the Subcontracted check box is selected for the order line.
This field is set to No Payment if the Customer Furnished Materials check box is selected for the order type in the Purchase Order Types (tdpur0194m000) session.
This field is set to Pay on Use if the Consignment Replenishment check box is selected for the order type in the Purchase Order Types (tdpur0194m000) session.
This field cannot be set to Pay on Receipt for the following order types:
- Consignment replenishment.
- Consignment payment.
- Return rejects (unless Payable to Supplier is applicable).
This field cannot be set to Pay on Use if the following applies:
- Delivery is not to a warehouse.
- Delivery is to a project warehouse.
- A sold-to business partner is linked to the warehouse.
- The quantity is less than zero for return order lines.
- The item is a cost, service, tools or subcontracting item.
- The Release to Warehousing check box is cleared for the item in the Items - Purchase (tdipu0101m000) session.
This field cannot be set to No Payment if the following applies:
- Delivery is not to a warehouse.
- Delivery is to a project warehouse.
- A sold-to BP is linked to the warehouse.
- The order is a Purchase Payment order.
- The order is an inbound consignment replenishment order.
- The item is a cost, service, tools or subcontracting item.
- The Release to Warehousing check box is cleared for the item in the Items - Purchase (tdipu0101m000) session.

Default value

This field is defaulted from the Order Terms and Conditions (tctrm1130m000) session.

Allowed values

Pay on Receipt
Pay on Use
No Payment
Not Applicable

Owner

The owner of the purchase order line item.

An owner can be specified only if the Payment field is Pay on Use or No Payment, the purchase order line is a VMI direct delivery line, or service subcontracting applies to the line.

Note: This field if is applicable only if the Ownership External check box is selected in the Implemented Software Components (tccom0100s000) session.

Default value

A default owner is determined as follows:

Payment is Pay on Use
Defaulted from the Buy-from Business Partner in this session.
Payment is No Payment
Defaulted from the Buy-from Business Partner in this session.
If the purchase order line contains customer furnished material, defaulted from the sold-to business partner of the top demand sales order.
VMI direct delivery
Defaulted from the Sold-to Business Partner of the linked sales order.
Service subcontracting
Defaulted from the linked service order or work order.

Return Ownership

Use this field to define the ownership of the goods if goods must be returned.

Based on the purchase order's Payment field, the owner can be the company ( Pay on Receipt), the supplier ( Pay on Use), or the customer ( No Payment). With this Return Ownership field, Warehousing determines which inventory must be returned.

Note:

If the Payment field is set to Pay on Receipt, this field is set to Company Owned.
If the Payment field is set to No Payment, this field is set to Consigned or Customer Owned.

Allowed values

Company Owned: company owned
Consigned: consigned
Customer Owned: customer owned
Return as Issued: When items are returned from the production environment to the warehouse, for example, because fewer items were required than issued for production, the original owner at the time of issue will become the owner again (unless the items are damaged).
Deferred: The date the ownership is transferred from supplier to customer is still unknown. The change date is determined after the items are picked, and depends on both the warehouse types involved in the goods transfer and the agreement between supplier and customer.
Not Applicable: Your own organization owns the inventory. Ownership behavior refers only to not-owned inventory.

Payment (Internally)

Use this field to define the payment between the purchase office, which issues the purchase order, and the warehouse, which receives the purchase order.

This field is only applicable if the purchase office and the warehouse belong to different enterprise units.

Note:

You can only define this field if the Ownership Internal check box is selected in the Implemented Software Components (tccom0100s000) session.
This field is set to Not Applicable if the following applies:
- The Payment field is set to No Payment.
- The quantity is less than zero for return order lines.
This field is set to Pay on Receipt if the Subcontracted check box is selected for the order line.
If the buy-from business partner is an internal business partner, this field cannot be set to Pay on Use.

Default value

This field is defaulted from the Order Terms and Conditions (tctrm1130m000) session.

Allowed values

Pay on Receipt
Pay on Use
No Payment
Not Applicable

Payment (Direct Delivery)

Use this field to define the payment between the purchase office, which issues the purchase order, and the customer.

This field applies if a purchase order is created at the supplier's site for directly delivering goods to a VMI warehouse at the customer's site by a third party.

Note:

You can only define this field if the Ownership External check box is selected in the Implemented Software Components (tccom0100s000) session.
This field is set to Not Applicable if the warehouse has no linked sold-to business partner or delivery is not to a warehouse..
If the warehouse has a sold-to business partner linked to it, this field cannot be set to Not Applicable.
If the direct delivery is planned by Enterprise Planning and this field is set to Pay on Receipt, a sales order is generated to handle the payment between the purchase office and the receiver of the goods.

Default value

If the warehouse has a sold-to business partner linked to it, this field is defaulted from the Order Terms and Conditions (tctrm1130m000) session.

Allowed values

Pay on Receipt
Pay on Use
No Payment
Not Applicable

Ledger Account

ledger account

You can only enter a ledger account if the following applies:

The item is a cost item or a service item.
The Use General Ledger Codes for Ledger Account Entry check box is cleared in the Procurement Parameters (tdpur0100m000) session.

You cannot enter a ledger account if:

An LN project is used.
The purchase order originates from LN Service .
The purchase order is a direct delivery.

Note:

It is not mandatory to enter a ledger account.
LN Financials checks whether the ledger account exists in the financial company of the financial transaction. The financial company that is used depends on the financial department or purchase office.
After the goods are received, you can no longer change the ledger account.

Dimension 1

Use this field to select the dimension of this dimension type that you want to use.

You can only enter a ledger account and dimensions if the following applies:

The item is a cost item or a service item.
The Use General Ledger Codes for Ledger Account Entry check box is cleared in the Procurement Parameters (tdpur0100m000) session.

You cannot enter a ledger account and dimensions if:

An LN project is used.
The purchase order originates from Service .
The purchase order is a direct delivery.

Note:

It is not mandatory to enter a ledger account and dimensions.
Financials checks whether the ledger account exists in the financial company of the financial transaction. The financial company that is used depends on the financial department or purchase office.
After the goods are received, you can no longer change the ledger account.

Warehouse

warehouse

Receipt Address

The address where the goods are received.

Note: If the warehouse has dock (receipt) locations, which you can define in the Warehouse - Dock Locations (whwmd2120m000) session, LN checks whether an address is defined for the relevant receipt location. If yes, this receipt address is displayed by default. Otherwise, the warehouse address is displayed.

Lot Selection

lot selection

Note: If the warehouse is WMS controlled, the Lot Selection Same and Lot Selection Specific check boxes in the WMS Interface Parameters (whwmd2105m000) session determine whether you can select the Same or Specific value in this field.

Lot

lot

Serial Number

serial number

This field is not applicable if:

The Warehouse field is empty
The Lot Selection field is Same
The Subcontracted check box is cleared, unless the purchase order line is a return order line

Inventory Handling

This field indicates whether a complete item or its components are received.

When receiving components, not necessarily the first level bill of material (BOM) components are received. LN executes a top-down scan of the BOM until it finds a non-phantom component. If the BOM consists of only phantom items, the lowest level BOM components are posted.

Note:

This field cannot be set to By Component if:

The warehouse is WMS controlled, and the Inbound BOM/List Items check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session.
The purchase order is a return order with a WMS controlled warehouse, and the Outbound BOM/List Items check box is cleared for the warehouse in the WMS Interface Parameters (whwmd2105m000) session.
The Payment field is Pay on Use.

Release Date

The planned date to release the order to Warehousing . The release date is calculated by subtracting the warehouse inbound lead time from the planned receipt date.

Confirmed Receipt Date

confirmed receipt date

Changed Receipt Date

changed receipt date

Delivery Terms

delivery terms

Point of Title Passage

point of title passage

Customs Value

The tax that is levied on an export article's value.

The customs value is printed on the shipment document that is checked during the customs check. If this field is filled, the customs value need not be calculated when passing the customs, which saves time and transport costs.

For direct deliveries, the customs value is passed on to the purchase order from the sales order, in which case you cannot change the customs value on the purchase order. For more information, refer to Direct delivery.

Note:

The customs value only applies if the goods are delivered by Warehousing . If this field is filled and you release the order to Warehousing , the customs value is defaulted to Warehousing
For a subcontracted purchase order line with landed cost lines, if the Calculation Method field is set to Percentage of Valuein the Landed Cost Lines (tclct2100m000) session, the customs value, that is the standard cost of the item, is used as the value of the order line.
The customs value is used to calculate the landed costs for a purchase order line if:
- The Subcontracted check box is selected for the purchase order line in the Purchase Order Lines (tdpur4101m000) session.
- For the Landed Costs Revision Code selected in the Landed Cost Lines (tclct2100m000) session, the Calculation Method field is set to Percentage of Value in the Landed Cost Revisions (tclct1120m000) session.

Default value

The Customs Value field is defaulted with the standard cost or net price of the item. However, you can modify this value. For a subcontracted purchase order line, the Customs Value field is defaulted with the standard cost of the item.

The customs value is calculated as follows:

price - order line discounts - order header discount

You can manually change the default value.

For example, you can change the customs value if:

A company delivers a spare part that is covered by the guarantee. The spare part's price is zero, but the spare part's value, and as a result the customs value, is greater than zero.
A company lends out a machine to a business partner abroad. The price for this service is zero, however the machine's value, and as a result the customs value, is greater than zero.

Note:

If Print Purchase Orders (tdpur4401m000) is an automatic activity for the applicable order procedure, the customs value is not printed. For further information on order procedure activities, see Purchase Order Type (tdpur0694m000).
The customs value is not printed if, in the Purchase Order (tdpur4100m900) session, you press Ctrl-P or click the print button and select Preview Purchase Orders to print purchase order data.
You can send purchase orders to suppliers by electronic data interchange (EDI) or Business Object Document (BOD) message. For this purpose, you must adjust the protocol if the Customs Value (tdpur401.cuva) must be included.

Inspection

If this check box is selected, the items on this order line must be inspected on receipt.

This check box is unavailable if:

The item type is Cost, Service, or List.
The Direct Delivery check box in the Purchase Order Types (tdpur0194m000) session is selected for the purchase order type.
The Collect Order check box in the Purchase Order Types (tdpur0194m000) session is selected for the purchase order type.
The Inventory Handling field in the current session reads By Component.

Note: When you create a purchase order line for the item, by default, this check box receives the same value as the Inspection check box in the Items - Purchase Business Partner (tdipu0110m000) session. If no combination of item and business partner is specified in the Items - Purchase Business Partner (tdipu0110m000) session, this check box is selected only if the same check box is also selected in the Ship-from Business Partner (tccom4121s000) and Item - Purchase (tdipu0601m000) sessions.

Conformance Reporting

The conformance reporting code linked to the item.

Note: You can specify a conformance reporting code only if the Inspection check box is selected in this session.

Default value

The conformance reporting code is defaulted as follows:

From the Purchase Contract Lines (tdpur3101m000) session.
If first article inspection (FAI) applies to the item, from the Specific First Article Inspection Rules (qmptc0116m100) session.
From the Items - Purchase Business Partner (tdipu0110m000) session.
From the Items - Purchase (tdipu0101m000) session.

Shipment

shipment ID

Supplier ASN Number

The buy-from business partner's ASN number.

Receipt Number

receipt number

Receipt Line Number

The number of the receipt line that is linked to the receipt number in Warehousing . You can register receipts in the Warehouse Receipt (whinh3512m000) session.

Actual Receipt Date

actual receipt date

Inventory on Hand

inventory on hand

Inventory on Hand

The inventory unit in which quantities are expressed.

Inventory on Order

inventory on order

Inventory Allocated

allocated inventory

Committed Inventory

committed inventory

Approved Quantity

The number of received items that is approved, expressed in the purchase unit.

Note:

If the receipt is not carried out in Warehousing , LN enters the received quantity in this field.
If the Payable to Supplier check box is selected in the Inventory Handling Parameters (whinh0100m000) session, this field is invisible.

Approved Quantity

The number of received items that is approved, expressed in the inventory unit.

Note:

If the receipt is not carried out in Warehousing , LN enters the received quantity in this field.
If the Payable to Supplier check box is selected in the Inventory Handling Parameters (whinh0100m000) session, this field is invisible.

Rejected Quantity

The total rejected quantity minus the quantity that was accepted afterwards for this order line, including linked detail and back order lines, expressed in the purchase unit.