Inspection Order Test Data (qmptc1115m000)

Use this session to enter the actual test data after you measure a sample item. The test data is used to accept or reject a quantity based on the sampling results. Each sample which is tested is classified as either Pass or Fail.

If drawings are present, you can use the Drawing buttons to display:

How an item is tested (Test Drawing button).
What the characteristic looks like (Characteristic Drawing).
What the item looks like (Item Drawing).

Use the Evaluate Algorithm button to calculate the value of the algorithm characteristic based on the data of other characteristics. You cannot modify the calculated results. You can only apply this option to orders with an Active status.

Field Information

Inspection Order

The code of the inspection order.

Sample

sample

Aspect

aspects

Inspection Order Line

The position in the BOM at which point a certain quality inspection is to take place.

Characteristic

characteristic

Characteristic Type

The type of value that is measured.

Sample Part

An identification number that LN generates to distinguish between the different measurements you can carry out in one sample quantity. The number of measurements is based on the test quantity.

Example


Sample quantity	100 pieces
Test quantity	20 pieces

Explanation: You need to do 5 tests on 20 pieces to get a sample quantity of 100 pieces (100/20=5). Consequently, 5 test lines will be generated, with each with a unique serial number.

Note: The total number of serial numbers cannot exceed the value of the sample quantity divided by the test quantity

Serial Number

The unique identification of a single physical item. LN uses a mask to generate the serial number. The serial number can consist of multiple data segments that represent, for example, a date, model and color information, sequence number, and so on. Serial numbers can be generated for items and for tools.

Lot

The unique code of the lot.

Time of Test

The date on which the test takes place. The default date is the current date.

Test Unit

test unit

Note: The characteristic unit is the default value. The test unit and the characteristic unit must have the same physical quantity.

Measurement Value

The result of the test.

Enter a numeric value if you select Quantitative in the Result Type field, and if the Characteristic Type field is not set to Option. If an algorithm is specified for the inspection order line, the algorithm calculates the numeric value.

Note: You cannot modify the test result.

Option Set

option set

Note: You can enter an option set if the Characteristic Type field is on Option.

Option

The option that was found.

Note: Depending on what you enter in the Option Type field in the Options (qmptc0114m000) session, the option is either Acceptable or Not Acceptable.

Result

The result of the inspection

Note: LN automatically generates a value in this field, depending on the quality limits you define in the Standard Test Procedure Characteristics (qmptc0115m000) session and/or in the Options (qmptc0114m000) session.

Test Area

test areas

Assigned Employee

The employee who executed the test for this characteristic.

Instrument

The default instrument to measure the characteristic.

Overall Result

The overall result of the inspection, by order, sample, or serial number.

Note: The value of this field is automatically generated by LN, depending on the quality limits you define in the Standard Test Procedure Characteristics (qmptc0115m000) session and/or in the Options (qmptc0114m000) session.

Pass: LN decides whether a value is Pass on one of the following conditions: If you entered Integer/Fraction in the Characteristic Type field, and the Measurement Value field is Between Limits or If you entered Option in the Characteristic Type field, and the Option field is Acceptable
Fail: LN decides whether a value is Fail on one of the following conditions: If you entered Integer/Fraction in the Characteristic Type field, and the Measurement Value field is Outside Limits or If you entered Option in the Characteristic Type field, and the Option field is Not Acceptable.
Not Inspected

Item

item

Description

The description or name of the code.

Instrument Number

The number of the instrument that can be used to trace the instrument.