Job Shop Routing Operation - Process Variables (tirou4113m000)
Use this session to manage the process variables of an operation.
Field Information
- Site
- Product
-
The item being produced.
- Routing
-
The routing ID.
- Revision
-
The revision for which the routing is used.
- Operation
- Operation Step
- Process Variable
- Limit Type
-
Specify the value in which the default limit is expressed.
Allowed values
- Absolute
-
The upper and lower deviation of the target value is expressed as an absolute value.
-
Limit
If the upper limit is expressed as an absolute value, the value is defined to which the process variable's target value can be exceeded.
For example, if the norm is 30 and the upper limit must not exceed 33, 33 is displayed this field.
-
Percentage
-
- Percentage
-
The upper and lower deviation of the target value is determined by a percentage.
-
Limit
If the upper limit is expressed as a percentage, the percentage is defined with which the process variable's target value can be exceeded.
For example, if the norm is 30 and the upper limit must not exceed 33, 10% is displayed in this field.
-
Percentage
If the lower limit is expressed as a percentage, the percentage is defined that the process variable's input value can be lower than the norm.
For example, if the norm is 30, and the lower control limit must not be lower than 27, 10% is entered in this field.
-
- Norm
-
The process variable target value.
- Lower Limit
-
The process variable lower control limit, expressed as an absolute value or as a percentage.
- Upper Limit
-
The process variable upper control limit, expressed as an absolute value or as a percentage.
- Lower Tolerance
- The lower limit of the process variable as a percentage.
- Upper Tolerance
- The upper limit of the process variable as a percentage.
- Inspection Description
-
Description of the inspection process.
- Registration Type
-
The type of registration applicable to the measured values of process variables.
Allowed values
- Optional Registration
-
The registration of the measured values is optional.
- Mandatory Registration
-
The registration of the measured values is mandatory.
- Instruction Only
-
By default, the registration type is set to this option, for example, when the production orders are migrated from previous feature packs.
- Sample Frequency
-
The sample frequency is the total quantity to be measured and is expressed as a percentage.