Inspection Order Lines (qmptc1101m000)

Use this session to maintain inspection order lines. For each combination of an aspect and a characteristic, an inspection line is available. The data related to the characteristic can be changed for this specific inspection order.

Note:

You cannot modify a record if the test data of the line already exists. If the order line status is set to Completed no new lines can be added for this origin order.

You can view the transaction events related to a specific item, serial or lot combination for an inspection order, order inspection and non-conformance reports in the Item, Lot and Serial Transactions (whltc3510m000) session of Warehousing.

Tabs

General Details about the characteristic.
Test Data Details about the method of testing.

Field Information

Inspection Order

inspection order

Line

The position number on the order to which the inspection order is linked. This can be the position number of the sales order line, the position number of the purchase order line, or the position number in the BOM.

Status

The order line status indicates the current status of the inspection line.

The status is changed in several sessions:

Inspection Order Lines (qmptc1101m000) (free)
Print Inspection Orders (qmptc1400m000) (printed)
Inspection Order Test Data (qmptc1115m000) (active)
Complete/Process Order Inspections (qmptc1202m000) (completed)

Planned Start Date

The planned date on which the user initiates the inspection of the characteristic.

Planned Completion Date

The planned date for the completion of the inspection of the characteristic.

Aspect

aspects

Characteristic

characteristic

Note:

Infor LN defaults this value based on the value specified in the Document field.

This field is enabled only if the Conformance Reporting check box is cleared for the related inspection order.

Document

The document associated with the conformance reporting.

Note:

This field is enabled only if the Business Communication Implemented check box is selected in the Quality Management Parameters (qmptc0100m000) session.

Infor LN populates the value in this field from the Quality Documents (tcbcm0120m100) only if the Conformance Reporting check box is selected.

Reference Designator

The location where the item component can be inserted. This value is used to differentiate between two test group lines with the same data.

Note: You can select this value from the Reference Designators (tcmcs0190m000) or the Standard Test Procedure Characteristics (qmptc0115m000) session.

Defect Classification

The severity of the defect.

Allowed values

Critical
Major
Minor
Not Applicable

Ignore for Result Determination

If this check box is selected, the characteristic is not considered when determining the inspection result.

Note:

This value is defaulted from:
- The Order Specific Inspection Lines (qmptc0151m00) session if order lines exist in the Inspection Order (qmptc1100m100) session. Else, value specified in the Standard Test Procedure Characteristics (qmptc0115m000) session is considered.
- The Standard Test Procedure Characteristics (qmptc0115m000) session for the manually created lines, only if the value is not specified in the Order Specific Inspection Lines (qmptc0151m00) and Standard Test Procedure Characteristics (qmptc0115m000) sessions.
This field is enabled only if the Status of the inspection order line is set to Free.

Characteristic Type

The type of value that is measured.

Characteristic Unit

algorithm

Note: You can use the Algorithm field, only if you enter Algorithm in the Method field. Enter the name of the algorithm which will calculate the characteristic.

Characteristic for Algorithm

If this check box is selected, this characteristic can be used as a variable or as a constant in the algorithm of another characteristic.

Option Set

option set

Note: You can enter an option set if the Characteristic Type field is on Option.

Method

The type of characteristic value or the way in which the characteristic value is calculated.

Algorithm

algorithm

Note: You can use the Algorithm field, only if you enter Algorithm in the Method field. Enter the name of the algorithm which will calculate the characteristic.

Actual Start Date

The date on which the first data is entered for the inspection order line. This date is updated in the Inspection Order Test Data (qmptc1115m000) session and cannot be modified.

Actual Completion Date

The date on which the inspection is reported as completed. This date is updated in the Complete/Process Order Inspections (qmptc1202m000) session, and cannot be modified.

Test

test

Test Area

test areas

Destructive Test

If this check box is selected, the test is destructive and the item cannot be used after testing.

Result Type

The type of result reported to the user.

Test Unit

test unit

Note: The characteristic unit is the default value. The test unit and the characteristic unit must have the same physical quantity.

Test Standard

The standard normally used for the test. For example, a DIN standard.

Skill

skill

Employee

The person that performs the test on this characteristic.

Instrument

instrument

Instrument Group

The code of the instrument group. The group of instruments with similar characteristics.

Description

The description or name of the code.

Instrument Number

The number of the instrument that can be used to trace the instrument.

Description

The description or name of the code.

Fixed Characteristic Value

A characteristic value that is determined once. A characteristic value that is determined once.

Note:

The fixed characteristic value is compared to the test results entered in Inspection Order Test Data (qmptc1115m000) session.

This field only applies if the Method field is set to Fixed. If the Characteristic Type field is set to Integer, the Fixed Characteristic Value field is rounded off to the nearest integer.

Note:


User entry	Rounded value
5	11
4	10
6	11

Characteristic Standard

The standard normally used for characteristics.

For example, a DIN standard

Value Type

The value type of the characteristic.

Allowed values

Norm
Nominal
Not Applicable

Chart Name

The code of the chart name to which the nominal values are applicable.

Note: This field is available only if the Nominal option is selected in the Value Type field.

Chart Type

The code of the chart type for which the nominal values are applicable.

Note: This field is available only if the Nominal option is selected in the Value Type field.

Tolerance Standard

The code of the tolerance standard linked to the nominal value range.

Note: This field is available only if the Nominal option is selected in the Value Type field.

Nominal Value

The nominal value of the characteristic, expressed in the characteristic unit.

Note:

This field is available only if the Nominal option is selected in the Value Type field.

You can specify the value in this field, if the Characteristic Type field is set to Option and this value is not used to determine the inspection result.

In case of qualitative test entry ( Result Type is Qualitative for the related inspection order line), this value is used only to display the information and is not used to determine the inspection results.

Norm

The norm is the desired quality for this characteristic, expressed in the characteristic unit.

Note:

This field does not apply if you enter Fixed in the Method field or Option in the Characteristic Type field.

You can specify the value in this field, if the Characteristic Type field is set to Option and this value is not used to determine the inspection result.

Upper Limit

Type in the highest characteristic value, expressed in the characteristic unit, for which the quality is acceptable.

Note:

The Upper Limit field must be greater than or equal to the value in the Norm field.

You can specify the value in this field, if the Characteristic Type field is set to Option and this value is not used to determine the inspection result.

Lower Limit

Type in the lowest characteristic value, expressed in the characteristic unit, for which the quality is acceptable.

Note:

The Lower Limit field must be greater than or equal to the value in the Norm field.

You can specify the value in this field, if the Characteristic Type field is set to Option and this value is not used to determine the inspection result.