动作详细资料 (qmpqm2101m200)
使用此进程以查看为了解决 FRACAS 文档中报告的故障所执行操作的详细资料。
仅当在“质量管理参数 (qmptc0100m000)”进程中选中“故障报告、分析和纠正行动系统 (FRACAS)”复选框时,才能查看此进程。
- FRACAS 编号
-
The code of the FRACAS document.
- 说明
-
The description or name of the code.
- 状态
-
The status of the FRACAS document.
允许值
- 未结
- 已分配
- 已处置
- 已结束
- 已取消
- 位置
-
The position number of the FRACAS document.
- 报告的故障物料
-
The code of the item for which the failure is reported in the FRACAS document.
- 批次
-
The lot number linked to the item.
- 拒收序列
-
Could not view this field in the session.
- 数量
-
The quantity of the items for which the failure is reported.
- 报告的单位
-
The unit in which the quantity is expressed.
- 处置行动
-
The disposition action taken for the reported items.
允许值
- 等待处置
- 重做
- 替换
- 不合格
- 未发现故障
- 其它
- 处置代码
-
The disposition code linked to the FRACAS document.
Note:- This field is displayed only if the 可配置材料处置代码 check box is selected in the 质量管理参数 (qmptc0100m000) session.
- This field is enabled only if the 处置行动 field is set to a value other than 等待处置 and 不合格.
- 处置类型
-
The action that must be performed based on the disposition code specified in the FRACAS document.
允许值
- 返工(符合现有规格)
- 返工(符合新规格)
- 重新分类
- 退货
- 废品
- 原样使用
- 维修
- 未发现故障
- 等待处置
Note:This field is enabled only if the 处置行动 field is set to a value other than 等待处置 and 不合格.
- 库存日期
-
The inventory date assigned to the item when stored in the warehouse.
- 故障代码
-
The code of the identified failure.
- 隔离标识
- 隔离处置行
- 不合格报告
-
The code of the non-conformance report (NCR) linked to the FRACAS document.
- 纠正行动计划
-
The code of the corrective action plan (CAP) linked to the FRACAS document.
- 原因
-
The code of the reason for disposition.
Note:This field is enabled only if the 处置行动 field is set to a value other than 等待处置 and 不合格.
- 负责业务伙伴
-
The code of the business partner to whom the item is returned.
Note:This field is enabled only if the 处置类型 field is set to 退货.
- 工程数据流程
-
- 工程更改必填
-
If this check box is selected, design or engineering changes are required for the item. These changes can be one of the reasons for the failure action to be reported.
Note:The check box is enabled only if:
- The 产品生命周期管理集成已实施 check box is selected in the 质量管理参数 (qmptc0100m000) session.
- The item is 受修订号控制.
- 工程数据流程
-
The business process ID. The ID is generated after the business process is created in the 分派 (pdwfl1100m200) session.
- 相关订单公司
-
The PLM company in which the business process is created.
- 工程物料修订
-
The revision of the engineering item.
- 至物料
-
The code of the item. Infor LN considers this item for re-work or re-classification of the item for which the failure is reported.
Note:This field is enabled only if the 处置类型 field is set to 重新分类 or 返工(符合新规格).
- 动作代码
-
The code of the action taken to resolve the failure reported in the FRACAS document.
- 实际故障物料
-
The code of the actual failed item.
- 序列号
-
The serial number of the actual failed item.
- 批次编号
-
The lot number linked to the item.
- 修理不佳投诉
-
If this check box is selected, the resolution provided to the failure reported in the FRACAS document, is not appropriate.
Note:By default, this check box is cleared.
This check box is enabled only it the 状态 is 未结 or 已分配.
- 责任
- 实际数量
-
The quantity of the actual failed item.
- 实际单位
-
The unit in which the quantity is displayed.
- 物料 (已替换)
-
The code of the item. Infor LN considers this item to replace the item for which failure is reported.
Note:This field is enabled only if the 处置行动 field is set to 替换.
- 序列号
-
The serial number of the 物料 (已替换).
Note:This field is enabled only if the 处置行动 field is set to 替换.
- 批次编号
-
The lot number linked to the 物料 (已替换).
Note:This field is enabled only if the 处置行动 field is set to 替换.
- 数量
-
The quantity of the 物料 (已替换).
Note:This field is enabled only if the 处置行动 field is set to 替换.
- 替换的单位
-
The unit in which the quantity is expressed.
- 订单来源
-
The order type created to execute the disposition.
允许值
- 返工(符合现有规格)
- 返工(符合新规格)
- 重新分类
- 退货
- 废品
- 原样使用
- 维修
- 未发现故障
- 等待处置
Note:This field is enabled only if:
- The 处置类型 field is set to a value other than 不适用.
- The 状态 of the FRACAS document is set to 已处置.
- 订单
-
The code of the order that is created to execute the disposition.
- 处置订单位置
-
The line number linked to the order.
- 修理文本
-
The additional information related to the action.