Failure and Action Details (qmpqm2501m000)
Field Information
- FRACAS Number
-
The code of the FRACAS document.
- Status
-
The status of the FRACAS document.
Allowed values
- Open
- Assigned
- Dispositioned
- Closed
- Canceled
- Position
-
The position number of the FRACAS document.
- Reported Failed Item
-
The code of the item for which the failure is reported in the FRACAS document.
- Lot Number
-
The lot number linked to the item.
- Serial Number
-
The serial number of the item.
Note: This field is enabled only if the Configuration Controlled field is set to Serialized in the Items - Service (tsmdm2100m000) session or Item is serialized in Items-General, for the specified Reported Failed Item. - Inventory Date
-
The inventory date assigned to the item when stored in the warehouse.
- Reported Quantity
-
The quantity of the items for which the failure is reported.
- Reported Unit
-
The unit in which the quantity is expressed.
- Item (Original)
-
The code of the actual failed item.
- Lot Number
-
The lot number linked to the item.
- Serial Number
-
The serial number of the actual failed item.
- Actual Quantity
-
The quantity of the actual failed item.
- Actual Unit
-
The unit in which the quantity is displayed.
- Failure Code
-
The code of the identified failure.
- Reference Designator
-
The location where the item component can be placed. This value is used to differentiate between two test group lines with the same data.
- Repeated Failure
-
If this check box is selected, the reported failure is considered as a failure that has occurred again.
- Bad Fix
-
If this check box is selected, the resolution provided to the failure reported in the FRACAS document, is not appropriate.
Note:By default, this check box is cleared.
This check box is enabled only it the Status is Open or Assigned.
- Failure Category
-
The category of the failure.
- Failure Stage
-
The stage at which the failure is reported.
- Instrument Group
-
The code of the instrument group.
- Instrument
-
The code of the instrument that is used to identify the cause of the failure.
- Instrument Number
-
The number of the instrument.
- Technician
-
The engineer assigned to resolve the failure.
Note: You must specify this value if the FRACAS Status is set to Assigned. - Quarantine ID
-
The identification code of the quarantine ID.
- Quarantine Disposition Line
-
The quarantined manufactured or purchased items or materials disposition lines.
- Non-Conformance Report
-
The code of the non-conformance report (NCR) linked to the FRACAS document.
- Corrective Action Plan
-
The code of the corrective action plan (CAP) linked to the FRACAS document.
- Disposition Action
-
The disposition action taken for the reported items.
Allowed values
- Awaiting Disposition
- Rework
- Replace
- Non-Conformance
- No Fault Found
- Other
- Disposition
-
The disposition code linked to the FRACAS document.
Note:- This field is displayed only if the Configurable Material Disposition Codes check box is selected in the Quality Management Parameters (qmptc0100m000) session.
- This field is enabled only if the Disposition Action field is set to a value other than Awaiting Disposition and Non-Conformance.
- Disposition Type
-
The action that must be performed based on the disposition code specified in the FRACAS document.
Allowed values
- Rework (to Existing Specification)
- Rework (to New Specification)
- Reclassify
- Return to Vendor
- Scrap
- Use as is
- Repair
- No Fault Found
- Awaiting Disposition
Note: This field is enabled only if the Disposition Action field is set to a value other than Awaiting Disposition and Non-Conformance. - Responsible
-
The engineer responsible for the failure analysis.
- Reason
-
The code of the reason for disposition.
Note: This field is enabled only if the Disposition Action field is set to a value other than Awaiting Disposition and Non-Conformance. - Responsible Business Partner
-
The code of the business partner to whom the item is returned.
Note: This field is enabled only if the Disposition Type field is set to Return to Vendor. - Title
-
The name of business partner.
- To Item
-
The code of the item. Infor LN considers this item for re-work or re-classification of the item for which the failure is reported.
Note: This field is enabled only if the Disposition Type field is set to Reclassify or Rework (to New Specification). - Action Code
-
The code of the action taken to resolve the failure reported in the FRACAS document.
- Repair Date
-
The date on which the NCM Report is created.
- Item (Replaced)
-
The code of the item. Infor LN considers this item to replace the item for which failure is reported.
Note: This field is enabled only if the Disposition Action field is set to Replace. - Lot Number
-
The lot number linked to the Item (Replaced).
Note: This field is enabled only if the Disposition Action field is set to Replace. - Serial Number
-
The serial number of the Item (Replaced).
Note: This field is enabled only if the Disposition Action field is set to Replace. - Quantity
-
The quantity of the Item (Replaced).
Note: This field is enabled only if the Disposition Action field is set to Replace. - Replaced Unit
-
The unit in which the quantity is expressed.
- Order Origin
-
The order type created to execute the disposition.
Allowed values
- Rework (to Existing Specification)
- Rework (to New Specification)
- Reclassify
- Return to Vendor
- Scrap
- Use as is
- Repair
- No Fault Found
- Awaiting Disposition
Note:This field is enabled only if:
- The Disposition Type field is set to a value other than Not Applicable.
- The Status of the FRACAS document is set to Dispositioned.
- Order
-
The code of the order that is created to execute the disposition.
- Disposition Order Position
-
The line number linked to the order.
- Failure Solved
-
Indicates if the registered failure has been resolved.
- Impact on Engineering Data Revision
-
Indicates if the resolution provided for the registered failure has an impact on the engineering data related to the revision of the item.
- Failure Solved Date
-
The date and time when the failure is resolved.
- Failure Solved Remarks
-
Additional information related to the resolution provided for the registered failure.
- Last Assigned By
-
The ID of the user who assigns the NCMR.
- Assigned Date
-
The Assigned Date.
- Last Dispositioned By
-
The code of the user who last updates the disposition.
- Dispositioned Date
-
The date on which item line is dispositioned.
- Closed By
-
The ID of the user who closes the NCM Report.
- Closed Date
-
The date on which the NCM Report is closed.
- Cancelled By
-
The ID of the user who cancels the NCM Report.
- Cancelled Date
-
The date on which the Corrective Action Plan is cancelled.
- Failure Text
-
The additional information for the failure.
- Repair Text
-
The additional information related to the action.