Operation Assignment (tiapl1110s000)

Use this session to specify the line stations where the operations are executed, together with the effective date, location, and man occupation of the operations.

If operations are defined in LN, the operations are defined in the Operations (tiapl1500m000) session.

If the operations are not defined in LN, but delivered by an external source, you cannot change the operation assignments, but only display these operations in that session.

The current session is enabled for data entry if the following conditions apply:

  • Your current company is defined as the master company in the Assembly Planning Parameters (tiapl0100s000) session.
  • The External Assembly Parts and Operations check box is cleared, or the Test Mode check box is selected in the Assembly Planning Parameters (tiapl0100s000) session.

If the operation assignments are changed, you must run one of the following sessions to process the changes:

  • Refresh and Freeze Assembly Orders (tiapl3203m000)
  • Refresh and Freeze Assembly Orders (Multiple Bshells) (tiapl3204m000)

Field Information

Operation

The code of the operation that is linked to the line station.

Operations are either defined in the Operations (tiapl1500m000) session, or delivered from an external source, which depends on the selection of the External Assembly Parts and Operations parameter in the Assembly Planning Parameters (tiapl0100s000) session.

Line Station

The code of the line station where the operation is performed.

Sequence Number

A number that distinguishes assignments that are defined on the same combination of line station and operation.

Effective Date

The date when the operation assignment becomes effective.

Note: 
  • Effectivity overlap is not permitted.
  • The Effective Date must fall before the Expiry Date.
  • If an exception is used, the operation assignment is effective if both the date range and the exception are valid.

Expiry Date

The date when the operation assignment expires.

Note: 
  • Effectivity overlap is not permitted.
  • The Effective Date must fall before the Expiry Date.
  • If an exception is used, the operation assignment is effective if both the date range and the exception are valid.

Standard Configuration

If this check box is selected, the operation assignment is part of the standard configuration. The standard configuration defines that the assignment must be used for each product, unless an exception overrules the standard configuration.

Exceptions Present

If this check box is selected, an exception is linked to the operation.

You cannot select or clear this check box, but you must select an exception in the Exceptions (tcuef0105m000) session. Click Exceptions to zoom to that session.

If this check box is not selected, you cannot clear the Standard Configuration check box.

Work Location

The code of the location on the line station where the work is performed and where the assembly parts must be delivered.

Execution Sequence

The sequence number that indicates in which sequence the operations must be executed.

Operations with the same sequence number can be executed at the same time.

Man Occupation

The number of people that perform the operation at this line station.

If the Transaction Processing parameter is set to Order Based in the Assembly Control Parameters (tiasc0100m000) session, this value is also used for cost calculations.

The number can be zero.

Machine Occupation

The number of machines that are used for the operation at this line station.

If the Transaction Processing parameter is set to Order Based in the Assembly Control Parameters (tiasc0100m000) session, this value is also used for cost calculations.

The number can be zero.