Handling Unit Stock Point Details (whwmd5136m000)

Use this session to register the lot codes or serial numbers for the serialized or lot items contained in the current handling unit. This applies only to lot items and serialized items in the high volume scenario.

For handling units with status Staged, you can specify whether serialized or lot controlled and serialized items must be Not Shipped.

Changes to the lot and serial registration and the shipped or not shipped quantities are updated in the Shipment Line Stock Point Details (whinh4133m000) session.

 

Handling Unit

A uniquely identifiable physical unit that consists of packaging and contents. A handling unit can contain items. A handling unit has a structure of packaging materials used to pack items, or is a part of such a structure.

A handling unit includes the following attributes:

  • Identification code
  • Packaging item (optional)
  • Quantity of packaging items (optional)

If you link an item to a handling unit, the item is packed by means of the handling unit. The packaging item refers to the type of container or other packing material of which the handling unit consists. For example, by defining a packaging item such as Wooden Crate for a handling unit, you specify that the handling unit is a wooden crate.

Item

The item contained in the handling unit.

Multi-Item Handling Unit

If this check box is selected, the handling unit contains different items.

Shipment

The shipment to which the handling unit is linked.

Shipment Line

The shipment line to which the handling unit is linked.

Quantity in Storage Unit

The quantity of the handling unit, expressed in the storage unit.

Note

This value can be greater than the handling unit Quantity in Inventory Unit when the handling unit Status is set to Staged and part of the handling unit stock point details is set to Not Shipped.

The value is defaulted when the handling unit is created for an item to which at least one of the following applies:

Quantity in Inventory Unit

The quantity of the handling unit, expressed in the inventory unit.

Inventory Unit

The unit of measure in which the inventory of an item is recorded, such as piece, kilogram, box of 12, or meter.

The inventory unit is also used as the base unit in measure conversions, especially for conversions that concern the order unit and the price unit on a purchase order or a sales order. These conversions always use the inventory unit as the base unit. An inventory unit therefore applies to all item types, also to item types that cannot be kept in stock.

Sequence

The sequence number of the warehousing order line.

Effectivity Unit

The code of the effectivity unit.

Note

This value is defaulted from the Shipment Line Stock Point Details (whinh4133m000) session or the Warehouse Receipt Lines (whinh3512m100) session when you specify the lot number and effectivity unit.

This field is applicable only when:

  • The effectivity unit functionality is implemented.
  • The item is lot controlled.
Lot

The number of the lot. The lot number of the item is defaulted from the Shipment Line Stock Point Details (whinh4133m000) session if the item is low volume lot controlled.

In Storage Unit

The item quantity, expressed in the storage unit.

Storage Unit

The unit in which the quantity of goods stored is expressed.

Example

Storage unit: box

Inventory unit: liter

Inventory Date

The inventory date of the handling unit.

Note

This value is defaulted from the Shipment Line Stock Point Details (whinh4133m000) session and Warehouse Receipt Lines (whinh3512m100) session when you specify the lot number and effectivity unit.

This field is mandatory when the outbound method is FIFO or LIFO.

In Inventory Unit

The unit of measure in which the inventory of an item is recorded, such as piece, kilogram, box of 12, or meter.

The inventory unit is also used as the base unit in measure conversions, especially for conversions that concern the order unit and the price unit on a purchase order or a sales order. These conversions always use the inventory unit as the base unit. An inventory unit therefore applies to all item types, also to item types that cannot be kept in stock.

Approved Quantity

The quantity that is approved during inspection.

Approved Quantity in Inventory Unit

The quantity that is approved during inspection expressed in the inventory unit.

Rejected Quantity

The quantity that is rejected during inspection.

Rejected Quantity in Inventory Unit

The quantity that is rejected during inspection expressed in the inventory unit.

Destroyed Quantity

The quantity that is destroyed during inspection expressed in the inventory unit.

Destroy Reason

The reason code that explains why the items are destroyed.

Reject Reason

A code that indicates the reason for the rejection.

Scrapped Quantity

The part of the rejected quantity that is scrapped during inspection.

This field is displayed if the current session is started from the Handling Units (whwmd5130m000) session or directly or indirectly from the Handling Units tab of the Warehouse Inspection (whinh3622m000) session.

Scrapped Quantity in Inventory Unit

The part of the rejected quantity that is scrapped during inspection, expressed in the inventory unit.

This field is displayed if the current session is started from the Handling Units (whwmd5130m000) session or directly or indirectly from the Handling Units tab of the Warehouse Inspection (whinh3622m000) session.

Shipped Quantity

The shipped quantity expressed in the storage unit. This value is defaulted from the Quantity in Storage Unit field when the status of the handling unit is set to Staged.

This quantity is defaulted from the Shipment Line Stock Point Details (whinh4133m000) session.

Note
  • You can modify the value only when the Status of the handling unit is set to Staged.

  • This value cannot be greater than the quantity specified in the In Storage Unit field.

  • If you modify this value, LN updates the Not Shipped quantity of the Shipment Line Stock Point Details (whinh4133m000) session and the handling unit data.

  • The value in the current field is adjusted if you check or clear the Not Shipped check box in the current session.

Shipped Quantity in Inventory Unit

The shipped quantity expressed in the inventory unit.

Note

This value is determined based on the Shipped Quantity and is converted to inventory unit.

You cannot modify this value when the handling unit Status is set to Shipped.

Not Shipped

If this check box is selected, serialized items in the handling unit are not shipped.

Note

This field is mandatory and applicable only for serialized items.

This field is applicable only when the handling unit status is set to Staged.

Serial Number

The serial number of the item is derived from the Shipment Line Stock Point Details (whinh4133m000) session if the item is low volume serialized.

 

Generate Serials

Generates serial numbers for the high volume serialized items of the handling unit. The number of generated serial numbers is equal to the item quantity. For example, if the quantity is five, LN generates five serial numbers. If required, you can manually change the generated serial numbers. For more information, refer to To register serial numbers in the high volume scenario.

Generate Lot Codes

Generates a new lot code and inserts the generated lot code in all empty Lot fields. If required, you can manually change the generated lot numbers. For more information, refer to Lot control (not in inventory).

Split Line for Serials

Use this command to create a line and generate a serial number for each item if the item is a high volume serialized item. The number of lines and serial numbers that is created is equal to the quantity of items. Example: If the quantity is five, five lines are created and five serial numbers are generated.

Split Line for Lots

Starts the Split Handling Unit Stock Point Details (whwmd5236m000) session to create a new line below the selected line. In the new line you can specify a lot code and an item quantity to indicate that the specified number of items belonging to the specified lot is contained in the current handling unit. This command is available if the item is a high volume lot item.

To use this command:

  1. In the current session, select a line.
  2. Click Split Line for Lots on the toolbar.
  3. In the Quantity field of the Split Handling Unit Stock Point Details (whwmd5236m000) session, specify the number of items that the new line must contain.
  4. Click Split.
  5. In the new line, specify a lot code.
  6. Repeat the previous steps as required. In this way, you can specify that multiple lots are contained in the handling unit, each lot containing the specified number of items.