The code of the item.
Item - Warehousing by Site (whwmd4104m000)Use this session to view and maintain Warehousing item data and settings by site. Except for the mandatory company settings, for individual sites you can change the default values in the current session. Global versus site settings To specify data and settings by site, you must clear the Use Global Item Warehousing check box. Default values The default values in the current session are retrieved as follows:
Item The code of the item. Site A business location of an enterprise that can maintain its own logistical data. It includes a collection of warehouses, departments and assembly lines at the same location. Sites are used to model the supply chain in a multisite environment. These restrictions apply to sites:
You can link a site to an enterprise unit or an enterprise unit to a site. If an enterprise unit is linked to a site, the entities of the site belong to the enterprise unit. Conversely, if a site is linked to an enterprise unit, the entities of the enterprise unit belong to the site. The site's status. Allowed values Use Global Item Warehousing If this check box is selected, data and settings specified for the company level in the Items - Warehousing (whwmd4500m000) and Item - Warehousing (whwmd4600m000) sessions are used for the current site. Search Key A search key is an alternative means to retrieve the item. Note If multisite is implemented, this value is also used in the sites defined for the current logistic company. Also, changes made in this field are updated to the sites. Item Type Outbound Method Package Definition The code of the package definition. This is the default package definition for the item. Location Controlled If this check box is selected, the item is location controlled. Lot Controlled If this check box is selected, the item is a lot item. Lots in Inventory If this check box is selected, LN records the inventory for each combination of lot and warehouse and the full lot-control functionality is available. Lot Tracking Serialized Serials in Inventory If this check box is selected, the low volume scenario is used, which means that serial numbers are individually stored in inventory. You can view the serial numbers in inventory in the Item - Serials and Warehouses (whltc5100m000) session. Note Select this check box for low volume environments in which intensive tracking of serialized items, throughout the goods flow, is required and where each serialized item must be handled individually. Clear this check box for high volume environments in which serialized items do not require tracking throughout the goods flow, individual handling, and storage in inventory. If serials are stored in inventory, you cannot enable backflushing in Manufacturing. For more information, refer to Backflush Materials. By default, this field is selected by LN for manufactured assembly items. Important! If this check box is unavailable, make sure the Direct Process Warehouse Order Line check box in the Item - Production (tiipd0101m000) session is cleared. If this check box is selected, you can convert the serialized item to not being recorded in inventory. For this purpose, choose Convert to Not in Inventory if inventory is present for the item. As a result, this check box is cleared and the serial number in inventory records that are stored in the Lot Control are deleted. If this check box is selected, the following fields, which are used in the high volume scenario, are set to read-only and have the Not Applicable value:
Serial Tracking If this check box is selected, the item's serial number is tracked in Warehousing, which enables you to view the following information on serialized items:
You can only select this check box if the item is a serialized item. An item is serialized if, in the Item Defaults (tcibd0102m000) session, the Serialized check box is selected for the item. Allocation Level The inventory allocation level for the current item stored in the current warehouse. The default value is taken from the Allocation Level field of the Inventory Commitments (whinp2100m000) session. For a configurable purchased item, the Allocation Level is treated as Physical Item. This means that when you receive a configurable purchased item, a handling unit is generated, and the specifications, including the option list ID and allocations, are stored in the handling unit. Use Item Ordering Data by Site The settings that determine whether item values from the Item - Ordering by Site (tcibd2150m000) session are used as default values to create items in the current session and the Item Data by Warehouse (whwmd2510m000) session. The default value in this field is taken from the Use Item Ordering Data by Site field of the Item - Warehousing Defaults by Site (whwmd4109m000) session. Allowed values Default Supply System The default supply system of the selected item for the current site. Allowed values Product Assembly Kit Part If this check box is selected, the item can be used as assembly part in the Assembly Kit Parts List (whwmd4151m000) session. Note This field is displayed only if the Product Based Assembly Kits check box is selected in the Warehouse Master Data Parameters (whwmd0100s000) session. Item Valuation Group An entity that is used to group items for inventory valuation purposes. To define an item valuation group, you must link an item valuation group code to the items that you want to include in the item valuation group. Item valuation groups and warehouse valuation groups are linked, for example, to inventory valuation methods to valuate the item-warehouse combinations included in the warehouse and item valuation groups. Hazardous Material If this check box is selected, the item is hazardous. This can be important information for storage and transport. Class of Risk The class of risk that applies to the hazardous material. This field is only accessible when the Hazardous Material check box is selected. This field is used to select data to print national bills of lading, CMRs, freight documents, and inventory data in the Warehouse Orders module. Ownership Registration Level The following constraints apply to the values of this list:
Ownership Issue Priority List value Not Owned Inventory First is applicable to manufactured items, purchased items, and generic items that are no customized standard-to-order (STO) items. For customized STO items, you must select value Free. However, this value is not available if the value in the Registration Level field is Warehouse. Ownership for Return to Warehouse This field determines how to handle the ownership for production return orders. On a production order, a business partner is not known. As a result, Manufacturing cannot read an agreement. Instead, Manufacturing obtains a default value from the current field. Allowed values Exclude from Cycle Counting For the current site the selected item is ignored for cycle counting. If Inventory becomes Zero Indicates the value based on which the cycle counting data must be processed if the registered inventory of a stock point becomes zero. The following cycle counting values are available:
Note
Process Inventory Variances Automatically If this check box is selected, LN processes inventory variances automatically for the selected item in the current site. If the Use Global Item Warehousing check box is selected, the current check box is available if the Process Inventory Variances Automatically check box is selected in the Inventory Analysis Parameters (whina0100m000) session. If the Use Global Item Warehousing check box is cleared, the current check box is available if the Process Inventory Variances Automatically check box is selected in the Warehousing Settings by Site (whwmd2101m000) session. Floor Stock If this check box is selected, the item is a floor stock item. Floor stock items are not included in the order content. Therefore, no transactions, such as backflushing, are performed on them, both in Job Shop Control and in Assembly Control. However, floor stock items are in one case part of the order content, although even now no transactions are performed on them. This is the case when you print work instructions, and the following conditions apply:
Items can be stored as floor stock if:
The only supply system for floor stock items is KANBAN. If the Use Global Item Warehousing check box is cleared, you must select the KANBAN supply system in the Supply System field of the Warehousing Settings by Site (whwmd2101m000) session. If this check box is cleared, costing is based on the actual usage. Inventory Carrying Costs The inventory carrying costs constitute the cost of storing one inventory unit of an item for one year: these costs include interest, storage space, and risk. Allowed values Minimum: 0 Maximum: 9999999.9999 Note Inventory costs are used in the Calculate Economic Order Quantity (Camp) (whina2201m000) session. A generally accepted medium of exchange such as coins, treasury notes, and banknotes. The following currency types are available in LN:
Frequency for Storage Inspection The frequency for storage inspection of this item in days. Allowed values Minimum: 0 Maximum: 999 Default value 0 You can generate regular cycle counts. If you do so, only those items for which the value of this field is not equal to zero are considered. Length The length of the item. Width The width of the item. Height The height of the item. Floor Space The floor space of the item. Volume The volume of the item. Weight The weight of the item. Slow-Moving Percentage The limit up to which an item is identified as a slow moving item. This value is retrieved based on the turnover rate of the item. Ranges of To Turnover Rate (Upper Boundary) exist, each with a Slow-Moving Percentage assigned. The Perform Slow-Moving Analysis (whina6220m000) session uses this information to assign the correct Slow-Moving Percentage to the items. The turnover rate is calculated as follows: Turnover rate = annual usage / inventory on hand Expected Annual Issue The expected annual issue is the quantity of the item that is expected to be used (issued) for each year, expressed in the inventory unit. Allowed values Minimum: 0 Maximum: 999999999.9999 Default value 0 For the ABC analysis of items with a historical usage spanning no more than three periods, the expected annual issue is used in the Perform ABC Analysis (whina6210m000) session. The expected annual issue is also used in the Calculate Economic Order Quantity (Camp) (whina2201m000) session. The expected annual issue is updated through the Calculate Demand Forecast (whina2202m000) session. The inventory unit used to express the expected annual issue. Forecast Method The forecast method determines how the expected demand for the item in the next period is forecast.
These methods must be predefined in the Forecast Methods (whina2100m000) session. The forecast method is only used in the Calculate Demand Forecast (whina2202m000) session. In which it serves to compute:
ABC Code The ABC code shows each item's contribution to the annual sales volume. A items are high-value items, whereas C items constitute low-value items. Manually Entered ABC Code If this check box is selected, the ABC code has been entered manually in the ABC Code field. LN will not calculate and overwrite unless the proper option is selected in the Perform ABC Analysis (whina6210m000) session. If this check box is cleared, the ABC Code field has not been entered manually: it is system-generated or not yet calculated. The ABC code will be calculated by the Perform ABC Analysis (whina6210m000) session. Period for Shelf Life The unit of time in which the item's shelf life is expressed. Shelf Life [Periods] The shelf life indicates the length of time that the item can be held in inventory. Allowed values Minimum: 0 Maximum: 999 Rejects Handling The method used to handle items rejected during warehouse inspection. You can adjust the value in this field, even if unprocessed inspection lines are present. Allowed values Disposition Due Lead Time The default date and time on which quarantine inventory becomes available for planning using Enterprise Planning, TPOP, or SIC. The disposition lead time applies if By Due Date is selected in the Available for Planning field of the Inventory Handling Parameters (whinh0100m000) session. Time Unit The time unit used for the disposition lead time. Create Outbound Advice Despite Inventory Shortage If this check box is selected, LN allows outbound advice to be generated even if insufficient inventory is available. To generate outbound advice for negative inventory, the Create Outbound Advice Despite Inventory Shortage check box in the Generate Outbound Advice (whinh4201m000) session must also be selected. If you clear this check box and in the Item Data by Warehouse (whwmd2510m000) session, warehouses are present for this item for which the Create Outbound Advice Despite Inventory Shortage check box is selected, a warning is displayed saying that this check box will be cleared for the item in all warehouses. If you select this check box, you are prompted to confirm or cancel this change for all warehouses where the Create Outbound Advice Despite Inventory Shortage check box was not selected in the Item Data by Warehouse (whwmd2510m000) session. Note If the value of the Allow Negative Inventory field is:
Allow Negative Inventory Allowed values The default value in this field is taken from the Allow Negative Inventory field of the Items - Warehousing Defaults (whwmd4501m000) session and is defaulted to the Allow Negative Inventory field of the Item Data by Warehouse (whwmd2110s000) session. The value in this field is defaulted from the Allow Negative Inventory field of the Items - Warehousing Defaults (whwmd4501m000) session. If you change the value of this field to No and in the Item Data by Warehouse (whwmd2510m000) session, warehouses are present for this item for which the value is Yes or If on Order, a warning is displayed saying that the Yes or If on Order values will be inactivated for the item in all warehouses. If you change the value of this field to Yes or If on Order, you are prompted to confirm or cancel this change for all warehouses where the value for this item is No in the Item Data by Warehouse (whwmd2510m000) session. Note Negative inventory is not allowed for:
Lot Price If this check box is selected, you can use inventory valuation method Lot Price (Lot). You can select this check box if the following applies:
After any inventory arrived for the item or after any issues have been made, you can no longer change the setting of this check box. In such cases, you can change the inventory valuation method in the Change Valuation Method (whina1232m000) session. Lot Entry for Direct Delivery If the value of this field is Yes, and the order line on the ASN is a direct delivery purchase line, you must register the lot code in the ASN Line Lots and Serials (whinh3105m000) session. Note If you enter a template in the Lot and Serial Registration Template field, the settings of that field can overrule this field. Lot Entry During Receipt If the value of this field is Yes, you must register the lot codes of lot-controlled items when you receive these items in inventory. However, the receipt of items that results from a transfer order is excluded, unless the Lot Entry During Transfer check box is also selected. If the value of this field is Yes and the Generate Lots Automatically check box in the Warehousing Order Types (whinh0110m000) session is selected for the order type of the order lines associated with received items, lot codes are automatically generated for the received items. If the Lots in Inventory check box is selected, this field has the value Not Applicable and cannot be changed. If the value of this field is No, the option to register lot codes of received items during receipt is not available. Note If you enter a template in the Lot and Serial Registration Template field, the settings of that field can overrule this field. Lot Entry During Transfer This field determines whether you must fill lot distribution tables during warehouse transfers. This field can have the following values:
Note
Register Lot Issue During As Built This field determines whether you must fill lot distribution tables for component item issues for a production order. This field can have the following values:
Register Lot Issue in Service & Maintenance This field determines whether you must fill lot distribution tables for items issues in Warehousing or in Service. The values of this field determine at which point you must register lot numbers for lot items whose issue from the warehouse is initiated by orders of the following origin:
For this field, the following values are available:
Serial Number Entry for Direct Delivery This field is available if the high volume scenario is used. The high volume scenario is used if the Serials in Inventory check box is cleared. If the Serials in Inventory check box is selected, the low volume scenario is used. As a result, the current field is read-only and the value is Not Applicable. If the value of this field is Yes, and the order line on the ASN is a direct delivery purchase line, you must register the serial number in the ASN Line Lots and Serials (whinh3105m000) session. Serial Number Entry During Receipt This field is available if the high volume scenario is used. The high volume scenario is used if the Serials in Inventory check box is cleared. If the Serials in Inventory check box is selected, the low volume scenario is used. As a result, the current field is read-only and the value is Not Applicable. If the value of this field is Yes, you must register the serial numbers of received serialized items in the Receipt Line Lots and Serials (whinh3123m000) session. If the value of this field is Yes and the Generate Serials Automatically check box in the Warehousing Order Types (whinh0110m000) session is selected for the order type of the order lines associated with received items, serial numbers are automatically generated for the received items. If the value of this field is No, the option to register serial numbers of received serialized items during receipt is not available. Registration of received serial numbers can be useful in tracking what happens to which serial, for example, during inspection. For serialized items that must be inspected, the serial numbers are copied from the Receipt Line Lots and Serials (whinh3123m000) session to the Inspection Lines (whinh2131m000) session. You can change the setting of this check box, but if inventory exists for the current item, a warning to that effect appears. Serial Number Entry During Transfer This field is available if the high volume scenario is used. The high volume scenario is used if the Serials in Inventory check box is cleared. This field can have the following values:
Register Serial Issue During As Built This field is available if the high volume scenario is used. The high volume scenario is used if the Serials in Inventory check box is cleared. The values of this field determine at which point you must register serial numbers for component items that are issued from the warehouse to the job shop to manufacture end items listed on production orders in Manufacturing. To issue component items, the following methods are available:
The values in this field relate to the third method, Manual warehouse processing. This field can have the following values:
Register Serial Issue in Service & Maintenance This field is available if the high volume scenario is used. The high volume scenario is used if the Serials in Inventory check box is cleared. The values of this field determine at which point you must register serial numbers for serialized items whose issue from the warehouse is initiated by orders of the following origin:
For this field, the following values are available:
Lot and Serial Registration Template The lot and serial registration template. To select a template, zoom to the Lot and Serial Registration Templates (whwmd4102m000) session. Print Stock Point Details on Shipment Documents If this check box is selected,, LN prints the lot codes and serial numbers present in the Shipment Line Stock Point Details (whinh4133m000) session on the shipment documents. This option is especially required if the shipment documents are printed automatically. Note The value of this field is defaulted from the Print Stock Point Details on Shipment Documents field in the Items - Warehousing Defaults (whwmd4501m000) session. Handling Units in Use If this check box is selected, handling units are used for the selected item in the current site. If the Use Global Item Warehousing check box is selected, the current check box is available if the Handling Units in Use check box is selected in the Warehouse Master Data Parameters (whwmd0100s000) session. If the Use Global Item Warehousing check box is cleared, the current check box is available if the Handling Units in Use check box is selected in the Warehousing Settings by Site (whwmd2101m000) session. Handling Unit Version Controlled If this check box is selected, handling units used for the current item are version controlled. Handling units for which splitting is enabled can be defined as version controlled. If a handling unit is version controlled, you can use the handling unit after it has been split. For each split-up handling unit, a new version code is generated. Handling units can be split up into two or more handling units, for example, as a result of inbound advice to different locations. A version-controlled handling unit is modified and kept active after activities such as adding or taking out inventory. Log Version History If this check box is selected, history records are maintained for the versions of version-controlled handling units of the item. Handling unit version history is displayed in the Handling Unit Version History (whwmd5531m000) session. Track Handling Unit Status If this check box is selected, a history record is generated for each status change of a handling unit. Handling unit history is displayed in the Handling Unit Version History (whwmd5531m000) session. Dynamic Cross-docking If this check box is selected, cross-docking is applicable for the selected item in the current site. If the Use Global Item Warehousing check box is selected, the current check box is available if the Dynamic Cross-docking check box is selected in the Inventory Handling Parameters (whinh0100m000) session. If the Use Global Item Warehousing check box is cleared, the current check box is available if the Dynamic Cross-docking check box is selected in the Warehousing Settings by Site (whwmd2101m000) session. Location Controlled No cross-dock orders will be generated for quantities less than this value. Note
Maximum Cross-dock Quantity No cross-dock orders will be generated for quantities more than this value. Note
Create Cross-dock Order for Maximum This field indicates whether a cross-dock order will be generated for the maximum cross-dock quantity if the ordered quantity of the outbound order line is more than the quantity defined in the Maximum Cross-dock Quantity field.
Note
DMS Supplied If this check box is selected, the selected item can be supplied by direct material supply in the current site. If the Use Global Item Warehousing check box is selected, the current check box is available if the Direct Material Supply (DMS) check box is selected in the Inventory Handling Parameters (whinh0100m000) session. If the Use Global Item Warehousing check box is cleared, the current check box is available if the DMS Supplied check box is selected in the Warehousing Settings by Site (whwmd2101m000) session. DMS upon Receipt Indicates whether DMS will be carried out for this item after confirm receipt. DMS upon JSC Receipt Indicates whether DMS will be carried out for this item after confirm receipt of a JSC order. DMS on Inventory Indicates whether DMS will be applied to the inventory for this item. Use Fulfillment Plan This field provides the default value for the Use Fulfillment Plan check box in the Item Data by Warehouse (whwmd2510m000) details session. Item Text If this check box is selected, a text about the item is present. Packing Instructions If this check box is selected, packing instructions for the item are present. Default Inventory Lot Size The default lot size in an inventory that is allowed in a warehouse. Note
Search Opens the search options for items. By Family Starts the Search for Items by Family (tigrt0181m000) session in which you can look up items by family. By Feature Starts the Search for Items by Feature (tigrt0182m000) session in which you can look up items by feature. By Definition Starts the Search for Items by Search Definition (tigrt0183m000) session. By Master Item Starts the Search for Items by Master Item (tigrt0184m000) session. Perform Analysis The options for various types of inventory analyses. Forecast The forecast options. Update active Parameters in Warehouses and Items Starts the Update active Parameters in Warehouses and Items (whwmd2200m000) session. Units - Inventory Starts the Inventory by Item, Effectivity Unit and Warehouse (whwmd2516m100) session. Change Location System by Warehouse Starts the Change Location System (whwmd3205m000) session. Qualified Demand by Period Starts the Item Issue by Period (whinr1520m000) session. (Un)Blocked Lots Starts the Lot Blocking (whwmd6120m000) session. (Un)Blocked Warehouse/Location/Lots Starts the Stock Point Blocking (whwmd6130m000) session. Global (Un)Block Stock Points Starts the Global Stock Point Blocking (whwmd6230m000) session. ... Starts the Lot and Serial Registration Templates (whwmd4102m000) session.
| |||||||||||||||||