Service Planning Parameters (tsspc0100m000)

This session contains:

  • A history list of parameter sets and their effective dates. The most recent parameter sets are at the end of the list.
  • The current parameter set, at the top of the list (without an effective date). To view historical sets, double-click one of the historical parameter sets. You can use the Print Service Parameters (tsmdm0400m000) session to print and compare the parameter sets.

To view or change the current parameters, double-click the set without an effective date that appears at the top of the list. The Service Planning Parameters (tsspc0100m000) details session starts.

If you make changes and save the new parameter setting, LN performs the following actions:

  • Adds the new set at the end of the history list.
  • Updates the current set (at the top of the list).
Note

By default, the Description field contains the date and time when the previous parameter setting was saved. To avoid confusion, if you change the parameters, change or delete the default Description text.

 

General
Introduction Date

The date and time from which the parameters are valid. The parameters are valid up to the effective date of the most recent parameter setting.

Description

The description of the parameter set. For example, the reason why the previous setting was changed.

Units
Unit for Year

The Unit for Year can be used for the upperscale in the graphical planning tool. This unit is also used for manual input of a prediction's relative moments.

Note

The unit must be of physical quantity time and must have a conversion factor.

Unit for Day

The Unit for Day can be used for the lowest scale in the graphical planning tool. This unit is also used for manual input of a prediction's relative moments.

Note
  • The unit must be a physical quantity of type time and must have a conversion factor.
  • All relative moments of the prediction are converted to this unit, before stored in the database.
Description

The description or name of the code.

Unit for Tolerance Period

The unit must be a physical quantity of type time.

Maintenance Scenarios
General
Number Group for Maintenance Scenarios

The default number group for maintenance scenarios.

Series for Maintenance Scenarios

The default series defined for the maintenance scenarios number group.

Use Master Routing

If this check box is selected, master routing data can be used to generate activities for service planning and concepts.

Use Rule Book for Maintenance Scenarios

If this check box is selected, the application determines the maintenance scenario for the serialized item using the rule book, based on the defined search criteria. If this check box is cleared, you can manually add a maintenance scenario for the serialized item.

Use Service Item Group

If this check box is selected, you can use the rules specified for the service item group of the serialized item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios check box is selected.

Use Serialized Item Group

If this check box is selected, you can use the rules specified for the serialized item group of the serialized item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios check box is selected.

Use Item

If this check box is selected, you can use the rules specified for the item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios check box is selected.

Use Project Segment of Item

If this check box is selected, you can use the rules specified for the project segment of the item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios and Use Item check boxes are selected.

Use Serial Number

If this check box is selected, you can use the rules specified for the serial number of the item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios and Use Item check boxes are selected.

Use Installation Group

If this check box is selected, you can use the rules specified for the installation group of the serialized item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios check box and Use Item or Use Service Item Group check boxes are selected.

Use Usage Class

If this check box is selected, you can use the rules specified for the usage class of the serialized item as a search criterion.

Note

This field is enabled only if the Use Rule Book for Maintenance Scenarios and Use Item check boxes are selected.

Planned Activities
Number Group for Planned Activities

The default number group for planned activities.

Description

The description or name of the code.

Series for Planned Activities

The default series defined for the planned activities.

Description

The description or name of the code.

Step Size for Activity

The number that defines the sequence for the successive steps that must be performed for activity.

Note

For example, if you enter the value 10, the numbers assigned to successive activities are 10, 20, 30, and so on.

Step Size for Line

Create Planned Inventory Transactions

If this check box is selected, LN allows you to create planned inventory transactions (PIT) for the planned activity material requirements, during the release of the planned activity.

Status after Order Activity Cancellation

Generate Planned Activities
Generate Planned Activities in the Past Allowed

If this check box is selected, you can set the From Date in the Generate Maintenance Plan (tsspc2200m000) session to a date before the current date.

Status Generated Planned Activity

The default status of the planned activities, that are generated when a maintenance plan is generated using the Generate Maintenance Plan (tsspc2200m000) session.

Generate Planned Activities - Department
Priority 1

The first priority to set the default department for the generation of planned activities.

Priority 2

The second priority to set the default department for the generation of planned activities.

Priority 3

The third priority to set the default department for the generation of planned activities.

Priority 4

The fourth priority to set the default department for the generation of planned activities.

Generate Planned Activities - Requirements
Copy on Status

The planned activity status which determines when the resource requirements are created.

Generate Planned Activities - Serialized Item Start Date
Priority 1

The first priority to set the earliest date for the generation of planned activities for serialized items.

Allowed values

Date Priority

Priority 2

The second priority to set the earliest date for the generation of planned activities for serialized items.

Allowed values

Date Priority

Priority 3

The third priority to set the earliest date for the generation of planned activities for serialized items.

Allowed values

Date Priority

Priority 4

The fourth priority to set the earliest date for the generation of planned activities for serialized items.

Allowed values

Date Priority

Generate Planned Activities - Serialized Item End Date
Use Life Cycle

If this check box is selected, you cannot generate the planned activities after the end date (life cycle) of the serialized item.

Territory Planning
General
Number Group for Territory Planning

The default number group for territory planning.

Series for Territory Planning

The default series defined for the territory planning number group.

Number of Visits per Day

The average number of visits a service engineer can perform in one day.

Unit

The unit in which the number of visits per day is expressed.

Calculation
Use Provider for Distance Calculations

If this check box is selected, LN uses web service to calculate distance/travel time.

Provider

The information provider to calculate travel/distance time.

Allowed values

Provider

Note

This field is enabled only if Use Provider for Distance Calculations check box is selected.

Create Log File

If this check box is selected, LN generates a log file on the server. This log file helps the user (or Infor Support) to detect and analyse the problems.