Job Shop Routings (tirou4100m000)

	Job Shop Routings (tirou4100m000) Use this session to manage job shop routing operations. Note To use this session the Job Shop by Site parameter in the v session must be set to Active or In Preparation. Related topics Job Shop Routing Site The site ID. Note You can only select sites for which you are authorized. For site-specific operation rates, this field must be filled. For non-site-specific operation rates, leave this field blank. Product The item being produced. Routing The routing ID. Revision The revision for which the routing is used. Status The status of the routing. Effective Date The date the routing becomes effective. Standard Routing If this check box is selected, the operation sequence is linked to a standard routing for the selected item and site combination. and may apply to several items. The Standard Routing Code field contains the standard routing code. Related topics Standard Routing Standard Routing Code If the Standard check box is selected, this field must contain a standard routing code. Related topics Standard Routing Routing Quantity The quantity of product on which the cycle time is based. Minimum Quantity The minimal quantity of product for which the routing is used. Maximum Quantity The maximal quantity of product for which this routing is used. Order Lead Time The production time of an item expressed in hours or days, based on the lead time elements as defined in the routing operations. You can determine the order lead time by using the Calculate command. The value of this field is calculated based on the routing operations, item ordering by site. The lead time, as based on the cycle time and other values, is multiplied with the economic order quantity specified in item ordering by site. Setup Scrap Unusable or rejects of intermediate products, for example, because of faulty components, or products lost in cutting and sawing operations. The gross requirements and/or an operation's input quantity must be increased to account for anticipated scrap. This scrap applies when the routing is without operations. If operations are defined, scrap needs to be defined per operation. Yield Percentage The usable output from a operation expressed as a percentage of its input. Example 1: An operation in the production process for light bulbs has a yield of 98%. So, out of every 100 light bulbs produced, 98 are good on average. The remaining light bulbs are faulty, and will therefore be rejected. Example 2: Steel wires are twisted together to produce a steel cable. Due to the twisting, the cable is 10% shorter than the wires from which it is produced. So, the yield is set to 90%. In case operations are defined, yield needs to be defined per operation. Subcontracting with Material Flow If this check box is selected, only subcontracting with material flow is used to produce the item. Use for Planning If this check box is selected, the selected JSBOM is used for planning. Note Per item and site, only one Job Shop bill of material can be used for planning. Use for Costing If this check box is selected, the selected JSBOM is used for costing. Note Only one JSBOM per product can be used for costing purposes. Expiry Date The date on which the operation line is no longer valid. If you do not specify an expiry date, LN automatically sets the date to its maximum value. Related topics Effective date of materials and operations Created On The date the routing was created. Created By The employee who created the routing. Approved On The date the routing was approved. Approved By The employee who approved the routing. Expired On The date the routing was expired. Expired By The employee who expired the routing. Exceptions Present If this check box is selected, exceptions are linked to this routing. In other words, the routing is unit effective controlled. If you delete the routing's exceptions in the Unit Effectivity module, the check box is cleared. Note You cannot define exceptions for a standard routing. Related topics Overview of unit effectivity Standard Configuration If this check box is selected, the routing is part of an item’s standard configuration. The costs related to the routing are included in the standard cost price. If the Standard Configuration check box is cleared, the routing is not part of an item’s standard configuration. The costs related to the routing are not included in the standard cost price. The Standard Configuration check box in combination with the setting of the Valid check box in the Exceptions (tcuef0105m000) session indicates whether the routing is used for a specific effectivity unit. If the Standard Configuration check box is selected, and the Valid check box is cleared for an exception linked to the routing, the routing will be omitted for a specific effectivity unit or requirement. If the Standard Configuration check box is cleared, and the Valid check box is selected for an exception linked to the routing, the routing will be added for a specific effectivity unit or requirement. Note If the routing has exceptions attached, but you do not want to use the exceptions, for example, for selling spare parts, or for an end item which is not unit-effective, then you can clear this check box. Related topics Overview of unit effectivity Text If this check box is selected, additional text is present.