The sequence number assigned to every individual receipt of goods.
Direct Material Supply Distribution (whinh6130m000)Use this session to change priorities and/or quantities for distribution before approving and processing. When processing the distribution, LN will generate cross-dock orders (of type Direct Material Supply) and transfer orders to support the transfer of the goods to the destination warehouses and locations. When this session is started, LN:
Handling processing errors When quantities have been assigned to demand and these assignments have been approved, the assignments can be processed. Processing takes place in order of user priority. If processing of specific demand returns an error, processing of remaining demand is skipped. One or more messages will indicate the problem, for example, for some reason a cross-dock order is prevented from being generated. You can then analyze the problem, modify assignments if necessary, and process again. If specific demand cannot be processed, you can do either of the following:
Reversing transfer orders A transfer order that was generated and processed by DMS, can be reversed by generating and processing a return order. As a result, the quantity of the original transfer order will be transferred back to the supply warehouse. To reverse a transfer order, complete the following steps:
Cleaning up open orders When you start the DMS session, or when DMS is run, open cross-dock orders and transfer orders generated by a previous DMS run may be displayed. These orders may be updated by LN when you assign received/on hand inventory to related demand. Any unchanged open cross-dock orders and transfer orders generated by a previous DMS run, will be deleted when processing the new DMS run. Note A cross-dock order's status remains Open as long as any of its cross-dock order lines have status Canceled or Open. The transfer (outbound) order lines that are linked to these cross-dock orders and that are still open (that is, no outbound advice exists yet for the transfer order line) will also be deleted. If a second open cross-dock order (plus lines) in the destination warehouse is still linked to the transfer (inbound) order line, this order will also be deleted.
Supply Information Receipt The sequence number assigned to every individual receipt of goods. Receipt The receipt line for which DMS is run. Inspection The inspection number. Inspection The inspection line number. Order The receipt order origin. Order The receipt order number. Order The receipt order line. Order The sequence number of the receipt order. Operation One of a series of steps in a routing that are carried out successively to produce an item. The following data is collected during a routing operation:
This data is used to compute order lead times, to plan production orders and to calculate standard cost. Warehouse The warehouse where the item was received. Location The location of the item in the warehouse. For more information, refer to Supply location and demand location. Location For more information, refer to. Cluster The cluster of the warehouse. Effectivity Unit A reference number, for example a sales order line or a project deliverable line, that is used to model deviations for a unit effective item. Item Quantities Inventory on Hand The available on-hand quantity for the item in the receiving warehouse. Inventory on Hand The unit in which the on-hand quantity is expressed. Received Quantity in Receipt Unit The received quantity of the item. Received Quantity in Receipt Unit The unit in which the received quantity is expressed. Received Quantity in Inventory Unit The received quantity of the item. Received Quantity in Inventory Unit The unit of measure in which the inventory of an item is recorded, such as piece, kilogram, box of 12, or meter. The inventory unit is also used as the base unit in measure conversions, especially for conversions that concern the order unit and the price unit on a purchase order or a sales order. These conversions always use the inventory unit as the base unit. An inventory unit therefore applies to all item types, also to item types that cannot be kept in stock. To be Assigned The quantity that still needs to be assigned to demand. A quantity that is not assigned will be inbounded. To be Put Away The quantity that cannot be assigned and will be inbounded. This situation occurs when the received quantity exceeds demand. To be Put Away The unit in which the put-away quantity is expressed. Settings Priority Definition A user-defined set of priorities assigned to one or more LN table fields. LN uses the cross-dock order priority definition to generate the cross-dock order system priority. Note
Warehouse Supply Structure Defined for direct material supply, a user-specific cluster of warehouses, which consists of one or more supply warehouses and a number of destination warehouses. Cross-dock Restriction Definition A user-defined set of rules that LN uses to determine whether to create cross-dock orders. The rules are checked one after the other. If a valid condition is met, no cross-dock orders will be created. If no rule applies, LN permits creation of cross-dock orders. Cross-dock restriction rules are taken into account regardless of the use of direct material supply. DMS upon Receipt Indicates whether DMS will be performed for this item. For more information, refer to DMS upon Receipt. DMS upon JSC Receipt Indicates whether DMS will be performed for this manuafactured item. For more information, refer to DMS upon JSC Receipt. DMS on Inventory Indicates whether DMS will be applied to available on-hand inventory. For more information, refer to DMS on Inventory. Cross-docking Time Fence The lower and upper limits of the time fence to be taken into account. Force Cross-docking Range If the receipt quantity of the receipt line is between the minimum and maximum quantities, LN will look for demand and try to cross-dock the goods accordingly. Distribution Sequence The number that identifies a data record or a step in a sequence of activities. Sequence numbers are used in many contexts. Usually LN generates the sequence number for the next item or step. Depending on the context, you can overwrite this number. User Priority A priority that is entered by the user. LN uses the user priority along with the system priority to determine a cross-dock order's priority. LN will generate cross-dock order lines and, during inbound advice, advise cross-dock order lines for cross-dock orders with the highest priority first. Note The user priority is taken into account before the system priority. Note If you change this priority, and then click Save or use the Recalculate Non-Approved command, all assigned received quantities will be recalculated. System Priority A priority that is based on the planning priority rules or the cross-dock order priorities. LN uses the system priority along with the user priority to determine a cross-dock order's priority. LN generates cross-dock order lines and, during inbound advice, advises cross-dock order lines for cross-dock orders with the highest priority first. Note
Demand Type The type of demand that is taken into account for this item. For more information, refer to DMS demand type. Order The origin of the order. Order The code of the warehousing order. LN uses the series specified in the Series field of the Warehousing Orders (whinh2100m000) session to generate the order number. If the warehousing order is generated for an order from a package other than Warehousing, this number corresponds to the original order number and is not based on the series specified in the Series field. Order Line The order (line) that causes demand. Demand may be for the same warehouse or for another warehouse. Order Line The sequence number of the warehousing order line. Order Line Requirement Date The date the goods are required. For actual orders this date equals the planned delivery date. Package Definition A particular configuration of items and their packaging. A package definition for an item can, for example, be the following: a pallet contains 12 boxes and each box contains 4 pieces. Unit Binding If this check box is selected, the order unit must be used to deliver the ordered goods. Effectivity Unit A reference number, for example a sales order line or a project deliverable line, that is used to model deviations for a unit effective item. Destination Warehouse The warehouse from which demand originates. For more information, refer to Warehouse supply structures. DestinationZone/Location The zone or location in the destination warehouse from which demand originates. For more information, refer to Supply location and demand location. Required Quantity The quantity in inventory unit still needed for the demand order (shortage). Assigned On Hand Quantity The on hand quantity in storage unit assigned by DMS. You can change this quantity. Assigned ReceivedQuantity The received quantity in storage unit assigned by DMS. Note If you change this quantity, and then click Save or use the Recalculate Non-Approved command, all assigned received quantities will be recalculated. Assigned Received Quantity Assigned Received Quantity The received quantity in inventory unit assigned by DMS. You can change this quantity. Assigned Received Quantity The unit in which the quantity is expressed. Approved Quantity to Cross-dock Processed If this check box is selected, an approved assignment is processed after processing the assignment.
Approve All Approves all assignments. Unapprove All Unapproves all assignments. Process Processes the approved lines. Recalculate Non-Approved After you approve part of the (re)assigned quantities, use this command to reassign the remaining quantity according to the planning priority rules. Reload Restores intial demand data and reassigns the quantities. This equals closing the session and staritng it again from the Receipt Lines Awaiting Direct Material Supply (whinh3512m300) session or the Inspection Lines Awaiting Direct Material Supply (whinh3522m300) session. Order Details Shows the order details of the selected demand. View Lines with Assigned Quantity Only Shows only demand lines with assigned quantities. Planning Priority Rules Starts the Planning Priority Rules (whinh6122m000) session. Warehouse Supply Structure Relationships Starts the Warehouse Supply Structure Relationships (whinh6141m000) session. Cross-dock Restriction Rules Starts the Cross-dock Restriction Rules (whinh6151m000) session. Set Status to Processed Sets the status of the Direct MaterialSupply Executed field of the receipt or inspection line to Processed. As a result, DMS cannot be run anymore for this receipt line. Received quantities that have not yet been assigned will eventually be inbounded. Direct Material Supply Transfers Shows the related transfer orders generated by DMS.
| |||