Warehousing Order (whinh2100m100)

Use this session to view and maintain warehousing orders by order origin.

Note

Use the Maps section to view the location of the Address and the Address. You must select only one record at a time.

For warehousing orders originating from other packages, you can only modify the data created in Warehousing.

If the Warehousing Order check box on the Inventory Handling Parameters (whinh0100m000) session is selected and you modify, create, or remove a warehousing order manually, history is generated to register the different versions of the warehousing order. This applies to orders and order lines.

You can divide each origin/order combination into multiple sets of order lines. All order lines that belong to one order set will have the same shipping attributes.

A manually created warehousing order can have the following order origins:

  • Sales (Manual)
  • Purchase (Manual)
  • Service (Manual)
  • Maintenance Sales (Manual)
  • Maintenance Work (Manual)
  • JSC Production (Manual)
  • Transfer (Manual)
  • Project (Manual)
  • Project Contract

For warehousing orders created in Warehousing, the order number is determined by the Number Group field in the Inventory Handling Parameters (whinh0100m000) session.

Warehousing orders are processed according to one of the following procedures:

  • The default warehousing procedure that is linked to the warehousing order type of the warehousing order header to which the current order line belongs.
  • The warehousing procedure defined for the current warehousing order.

To adjust the warehousing procedure for individual warehousing orders, select Activities by Warehousing Order (whinh2104m000) from the appropriate menu. Note that if, for a particular order, you change the first activity of the procedure from manual to automatic, you must use the Process command from the appropriate menu to start processing the order. You must also use the Process command for manual orders whose first activity is automatic. For further details on warehousing procedures, see Warehousing procedures.

Note
  • You cannot handle inventory adjustments in this session. Inventory adjustments are supported by the Cycle Counting Orders (whinh5100m000) session because they do not generate a physical transaction.
  • Inspections in LN Quality are possible for warehouse orders having order origin Transfer (Manual) only if the QM Implemented parameter is selected for the order type Warehouse Transfer in the Quality Management Parameters (qmptc0100m000) session.
  • LN allows you to add cost items for the warehouse orders that have the origin Project (Manual) and Project Contract.
  • The origin Project Contract is used for the orders that originate from the project contracts.

 

Order

The origin of the order. The origin refers to the package that initiated the warehousing order. The Transfer origin refers to Warehousing.

Order

The code of the warehousing order. LN uses the series specified in the Series field of the Warehousing Orders (whinh2100m000) session to generate the order number. If the warehousing order is generated for an order from a package other than Warehousing, this number corresponds to the original order number and is not based on the series specified in the Series field.

Order

order set In a kit handling scenario, an order set includes the components of a subkit item.

Blocked

If this check box is selected, the order is blocked.

Related topics

Header Status

The status of the warehouse order header.

Inventory Transaction Type

A classification that is used to indicate the type of inventory movement.

The following inventory transaction types are available:

  • Issue
    From warehouse to other entity than warehouse.
  • Receipt
    From other entity than warehouse to warehouse.
  • Transfer
    From one warehouse to another.
  • WIP Transfer
    From one costing work center to another.
Ship-From
Code

The company from where the goods are shipped.

The ship-from company is the logistic company to which the warehouse in the Ship-from Code field belongs.

Only take into account this field if the warehousing order concerns a multicompany warehouse transfer.

Ship-from Code

A code used, together with the ship-from type, to identify the exact source of a warehousing order.

Ship-from Site

The site from where the goods are shipped. This is the site defined for the entity indicated in the Ship-from Code field.

Related topics

Warehousing Order Type

A code that identifies the type of a warehousing order. The default warehousing procedure that you link to a warehousing order type determines how the warehousing orders to which the order type is allocated are processed in the warehouse, although you can modify the default procedure for individual warehousing orders or order lines.

Office

The department that handles warehousing orders.

Ship-To
Code

The company to which the goods are shipped.

The ship-to company is the logistic company to which the warehouse in the Ship-to Code field belongs.

Important!

Only take into account this field if the warehousing order concerns a multicompany warehouse transfer. A warehousing order is a multicompany warehouse transfer if:

  • The inventory-transaction type is Transfer.
  • The ship-from type and the ship-to type is Warehouse.
  • The warehouses specified in the Ship-from Code and Ship-to Code fields belong to different logistic companies.
Ship-to Code

The ship-to type is used, together with the ship-to code, to identify where goods are shipped to.

The ship-to type can have the following values:

  • Business Partner
  • Warehouse
  • Work Center
  • Project
Note

For warehouse orders that have the origin Project (Manual), cost items are allowed only when the Ship-to is set to Business Partner.

Ship-to Code

A code used, together with the ship-to type, to identify where goods are shipped to.

Description

The description or name of the code.

Address

The address to which the goods must be shipped.

Note

When you generate outbound advice, you can select all the warehousing orders for the same ship-to address to create a run.

Location

The location where the goods are shipped to.

You can specify a location in the current field if both the warehouse and the item are location controlled, and the order origin is one of the following:

  • Sales (Manual)
  • Service (Manual)
  • Maintenance Sales (Manual)
  • Maintenance Work (Manual)
  • JSC Production (Manual)
  • ASC Production (Manual)
  • Transfer (Manual)
  • Purchase (Manual)
  • Project Contract

You can only specify a location of type Pick or Bulk.

Note

In a Shop Floor warehouse, you can only receive goods in Bulk locations. Therefore, if you ship goods to a Pick location in a Shop Floor warehouse, you cannot receive these goods in this warehouse.

Ship-to Site

The site from where the goods are shipped. This is the site defined for the entity indicated in the Ship-from Code field.

Related topics

Item Transfer
Item

The item that will be transferred to another item.

Serial Number

The original serial number that will be replaced.

In the Supersede Serialized Item (tscfg2240m000) session, you can replace the item ID or both the item ID and the serial number of the top item of a physical breakdown, for example, if changes have been made to the components. If the serialized item is low volume, the inventory level of the original item must be reduced from 1 to 0 and the inventory level of the new item must be increased from 0 to 1. For this purpose, a warehouse order of type transfer is generated when the Supersede process is started up in the Supersede Serialized Item (tscfg2240m000) session.

You can also create manual serial transfers, but you cannot manually transfer serialized items that:

  • Are allocated
  • Are blocked for transfer or outbound
  • Have status Defective, Working Condition, To be Recycled, or Removed.
Lot

The code of the lot from which the item is transferred.

Note
  • If available, this field is mandatory.
  • This value in this field is defaulted from the From Serial Number field, if specified.
  • This field is a display field if the warehousing order line is specified for the order.

This field is available if:

  • The Lot Control in Use check box is selected in Warehouse Master Data Parameters (whwmd0100s000) session.
  • The Handling Unit in the Warehousing Order (whinh2100m100) session is not specified.
  • The From Item field is specified.
  • The Lots in Inventory check box is selected in the Item - Warehousing (whwmd4600m000) session or the Item - Warehousing by Site (whwmd4604m000) session.
  • The Order Origin is Transfer or Transfer (Manual) and the Inventory Transaction Type is Transfer.
  • The lot is present for the from-item in the Item - Lot (whltc1100m000) session.

This field is unavailable if:

  • The values in the From Item and Into Item fields are different.
  • The lot is blocked.
Lot

The code of the new lot to which the item is transferred.

Note
  • This field is mandatory if the From Lot field is specified.
  • The value in this field is defaulted from the Into Serial Number field, if specified.
  • This field is a display field if the warehousing order line is specified for the order.

This field is available if:

  • The Lot Control in Use check box is selected in the Warehouse Master Data Parameters (whwmd0100s000) session.
  • The Handling Unit in the Warehousing Order (whinh2100m100) session is not specified.
  • The From Item field is specified.
  • The Lots in Inventory check box is selected in the Item - Warehousing (whwmd4600m000) session or the Item - Warehousing by Site (whwmd4604m000) session.
  • The Order Origin is Transfer or Transfer (Manual) and the Inventory Transaction Type is Transfer.

This field is unavailable if:

  • The From Item is different from the Into Item field.
  • The lot is blocked.
  • Inventory is present for the to-lot in the in the ship-to warehouse. The to-lot is the lot to which the item is transferred.
Item

The code of the item to which the original item is transferred.

Serial Number

The serial number with which the original serial number was replaced.

In the Supersede Serialized Item (tscfg2240m000) session, you can replace the item ID or both the item ID and the serial number of the top item of a physical breakdown, for example, if changes have been made to the components. If the serialized item is low volume, the inventory level of the original item must be reduced from 1 to 0 and the inventory level of the new item must be increased from 0 to 1. For this purpose, a warehouse order of type transfer is generated when the Supersede process is started up in the Supersede Serialized Item (tscfg2240m000) session.

You can also create manual serial transfers, but you cannot manually transfer serialized items that:

  • Are allocated
  • Are blocked for transfer or outbound
  • Have status Defective, Working Condition, To be Recycled, or Removed.
Order Date

The date on which the warehousing order is generated or registered.

Order Group

The group of orders to which the warehousing order belongs.

You can use order groups to carry out the outbound process for each group of related warehousing orders, to save time.

Carrier/LSP

An organization that provides transport services. You can link a default carrier to both ship-to and ship-from business partners. In addition, you can print sales and purchase orders on a packing list, sorted by carrier.

For ordering and invoicing, you must define a carrier as a business partner.

Carrier/LSP Binding

If this check box is selected, The carrier selected in the Carrier/LSP field is mandatory. If freight orders are created from the warehousing order, the binding carrier is the carrier that must be used to plan the transportation of the freight orders. You can select or clear this check box for warehousing orders created in Warehousing. For warehousing orders that originate from sales orders or purchase orders, this check box is read-only. The value of this check box is determined on the originating sales order or purchase order.

Route

The route that is used to ship the goods. When you generate an outbound advice, you can select all warehousing orders for a specific route to create a run.

Freight Service Level

An entity that expresses the duration of transportation, such as: delivery within twelve hours. A freight service level (optional) is used as follows:

  • As a factor that determines the transportation costs of a load.
  • As a factor that determines the freight rate of a freight order.
Revision

The revision number of the order.

Revision

The revision number of the item.

Minimum Quantity Tolerance

If the warehousing order is of the Receipt transaction type, this field shows the greatest negative deviation from the ordered quantity that is tolerated, expressed in a percentage. The Hard Stop on Quantity field in the Inbound Order Lines (whinh2110m000) session indicates which action LN carries out if the tolerance is not met.

LN retrieves the Minimum Quantity Tolerance from the Items - Purchase Business Partner (tdipu0110m000) session or from the Items - Purchase (tdipu0101m000) session if you release a purchase order or if a purchase schedule is released to Warehousing.

Example receipt

Minimum Quantity Tolerance: 10%

Ordered quantity: 200

If the received quantity is less than 180 items, and the value of the Hard Stop on Quantity field in the Inbound Order Lines (whinh2110m000) session is:

  • No, you can confirm the receipt.
  • Warn, you can confirm the receipt, but you get a warning.
  • Block, you cannot confirm the receipt.
Maximum Quantity Tolerance

If the warehousing order is of the Receipt transaction type, this field shows the greatest positive deviation of the ordered quantity that is tolerated, expressed in a percentage. The Hard Stop on Quantity field in the Inbound Order Lines (whinh2110m000) session indicates which action LN carries out if the tolerance is not met.

LN retrieves the Maximum Quantity Tolerance from the Items - Purchase Business Partner (tdipu0110m000) session or from the Items - Purchase (tdipu0101m000) session if you release a purchase order or if a purchase schedule is released to Warehousing.

Example receipt

Maximum Quantity Tolerance: 10%

Ordered quantity: 200

If the received quantity is more than 220 items, and the value of the Hard Stop on Quantity field in the Inbound Order Lines (whinh2110m000) session is:

  • No, you can confirm the receipt.
  • Warn, you can confirm the receipt, but you get a warning.
  • Block, you cannot confirm the receipt.

If the warehousing order is of the Issue transaction type, this field shows the greatest positive deviation from the ordered quantity that is tolerated to be shipped, expressed in a percentage. The Hard Stop on Quantity field in the Outbound Order Lines (whinh2120m000) session indicates which action LN carries out if the tolerance is not met.

LN retrieves the Maximum Quantity Tolerance from the Items - Sales Business Partner (tdisa0510m000) session or from the Items - Sales (tdisa0501m000) session, if you release a sales order or a sales schedule to Warehousing.

If the value of the Tolerance Type field in the Items - Sales Business Partner (tdisa0510m000) session or in the Items - Sales (tdisa0501m000) session is:

  • Percentage, the value of the Maximum Quantity Tolerance field is equal to this percentage.
  • Quantity, LN determines the Maximum Quantity Tolerance, which is always expressed in a percentage, as follows:
maximum tolerance (expressed as a quantity) / ordered quantity * 100%
Note

If you manually create a warehouse order, you can also manually specify the Maximum Quantity Tolerance.

Example issue

Maximum Quantity Tolerance: 10%

Ordered quantity: 200

If the advised quantity is more than 220 items, and the value of the Hard Stop on Quantity field in the Outbound Order Lines (whinh2120m000) session is:

  • No, you can save the outbound advice.
  • Warn, you can save the outbound advice, but you get a warning.
  • Block, you cannot save the outbound advice.
Minimum Time Tolerance

The number of days that the supplier is allowed to deliver too early.

Deliveries before this limit will be signaled or blocked.

Maximum Time Tolerance

The number of days that the supplier is allowed to deliver too late.

Deliveries after this limit will be signaled or blocked.

Contract Date

The contract date for warehousing orders derived from orders linked to a contract.

Delivery Terms

The terms or agreements concerning the delivery of goods.

Point of Title Passage

The point at which the legal ownership changes. At this point, the risk passes from the seller to the buyer.

Motive of Transport

A reason code that indicates why transportation takes place, for example, Repair, Sales, Transfer, and so on.

The value in this field is taken from the originating order of the current warehousing order, or defaulted from the Default Order Types by Origin (whinh0120m000) session.

This field is available if the:

Delivery Code

A reason code that indicates who is to pay for the transportation of the goods.

The value in this field is taken from the originating order of the current warehousing order, or defaulted from the Default Order Types by Origin (whinh0120m000) session.

This field is available if the:

Language

The language in which the company communicates and in which the work instructions are printed.

Reference

Any informative description field used to refer to, for example:

  • The person or department with authorization to perform a specific task.
  • The business partner's contact.
  • The original invoice number.
Information

Enter any information in this field.

Assembly Kit

An order-dependent set of items that must be supplied together to the shop-floor warehouse.

Return Order

If this check box is selected, this order is a return order.

The current check box is selected and disabled if one of the following is true:

  • The order origin is Sales (Manual) and the inventory-transaction type is Receipt.
  • The order origin is Purchase (Manual) and the inventory-transaction type is Issue.

The current check box is enabled if the order origin is JSC Production (Manual).

Backflush Order

If this check box is selected, this order is a backflushing order.

Note

If the Suppress Backflushing Orders check box in the Inventory Handling Parameters (whinh0100m000) session is selected, backflushing orders are suppressed. Therefore, you cannot view these orders in the current session, unless they are not blocked and not shipped.

Blanket Order

If this check box is selected, this order is a blanket warehouse order.

Consignment

If this check box is selected, this order concerns consignment inventory.

Default value

LN retrieves the default value, if specified, from the Consigned check box of the Items - Purchase Business Partner (tdipu0110m000) session.

Related topics

Return Rejected Goods

If this check box is selected, the order is used to return rejected items to the business partner.

Related topics

Return Quarantine Inventory Payable to Supplier

If this check box is selected, the order is used to return quarantine items to the business partner.

Direct Material Supply Transfer

If this check box is selected, the order was generated by DMS planning.

Handling Unit

The handling unit to be transferred, linked to the warehouse order. The outbound order lines are created based on the handling unit structure.

Note
  • This field is enabled if the Ship-from and the Ship-to fields are set to Warehouse.
  • This field is applicable if:

    • The handling unit is linked to the ship-from warehouse.
    • The handling units in the handling unit structure are not blocked and the handling unit status is set to In Stock.
    • The handling units in the structure must not have active process data (inbound/outbound, cycle counting/adjustment, quarantine data) specified.

 

Create Return Order

LN creates a regular warehouse transfer order for the items to be transported back to the warehouse specified in the Ship-From group box. The Return Order transports the items from the Ship-To warehouse back to the Ship-From warehouse.

Example

When the first warehouse transfer is from warehouse A to warehouse B and you create a Return warehouse transfer, LN copies the warehouse transfer (same item, quantity and so on) and the transfer is from B to A.

Calculate Planned Delivery Date

Use this command to calculate the planned delivery date based on the planned receipt date using the following formula:

PRD - CC - TT - CCsf

PRDPlanned receipt date
CCCalendar correction (ship-to)
TTTransport time
CCsfCalendar correction (ship-from)

Note: When LN calculates the planned delivery date and the lead times are expressed in hours, LN takes into account all the time that is available on a day according to the actual calendar. However, if the lead times are expressed in days, LN considers a day a whole day if the actual calendar indicates that time is available on that day.

Example 1: lead times in hours. Planned receipt date: Friday 17:30:00. Transport time (in hours): 10. The ship-to business partner's actual calendar has an 8:30:00 start time and a 17:00:00 end time. The carrier's actual calendar has a 7:30:00 start time and an 18:00:00 end time. The ship-from's actual calendar has an 8:00:00 start time and a 17:00:00 end time. These calendars are all available from Monday through Friday each week.

According to the ship-to business partner's actual calendar, receipt cannot take place at Friday 17:30:00. Therefore the corrected planned receipt date is Friday 17:00:00. According to the carrier's actual calendar, the carrier will carry the goods 9.5 hours on Friday (from 7:30:00 until 17:00:00) and half an hour on Thursday (from 17:30:00 until 18:00:00). According to the ship-from's actual calendar, the goods cannot be delivered at Thursday 17:30:00. Therefore, the corrected planned delivery date is Thursday 17:00:00.

Example 2: lead times in days. Planned receipt date: Friday 9:00:00. Transport time (in days): 2. The ship-to business partner's actual calendar has an 8:30:00 start time and a 17:00:00 end time. The carrier's actual calendar has a 7:30:00 start time and an 18:00:00 end time. The ship-from's actual calendar has an 8:00:00 start time and a 17:00:00 end time. These calendars are all available from Monday through Friday each week.

According to the ship-to business partner's actual calendar, receipt can take place at Friday 9:00:00. Therefore, no calendar correction (ship-to) is needed. If the actual calendar indicates that time is available on a day, the day is considered a whole day. Thus, according to the carrier's actual calendar, Friday is considered a whole day, which means Friday and Thursday are transport days. According to the carrier's actual calendar, the planned delivery date is Thursday 7:30:00. However, taking into account the ship-from business partner's actual calendar, the planned delivery date is Wednesday 17:00:00 because Thursday at 7:30:00 the ship-from business partner's actual calendar is not open.

Note

  • If the planned receipt date is not specified, LN sets both the planned receipt date and the planned delivery date to the current date.
  • If the calculated planned delivery date is before the current date, LN sets the planned delivery date to the current date.
Print Warehousing Orders

Starts the Print Warehousing Orders (whinh2400m000) session. By default, LN starts this session to print the report.

Calculate Planned Receipt Date

Calculates the planned receipt date based on the planned delivery date using the following formula:

planned receipt date = PDD + TT + CC

PDDPlanned delivery date
TTTransport time
CCCalendar correction (ship-to)

Note: When LN calculates the planned receipt date and the lead times are expressed in hours, LN takes into account all the time that is available on a day according to the actual calendar. However, if the lead times are expressed in days, LN considers a day a whole day if the actual calendar indicates that time is available on that day.

Example 1: lead times in hours. Planned delivery date: Wednesday 10:00:00. Transport time (in hours): 8. The carrier's actual calendar has a 7:00:00 start time and a 17:00:00 end time. The ship-to business partner's actual calendar has an 8:30:00 start time and an 18:00:00 end time. Both actual calendars are available from Monday through Friday each week.

The carrier will transport the goods for seven hours on Wednesday (from 10:00:00 until 17:00:00) and for one hour on Thursday (from 7:00:00 until 8:00:00). Thus, according to the carrier's calendar, the planned receipt date is Thursday 8:00:00. However, also, taking into account the ship-to business partner's actual calendar, the planned receipt date is Thursday 8:30:00.

Example 2: lead times in days. Planned delivery date: Wednesday 16:00:00. Transport time (in days): 2. The carrier's actual calendar has a 7:00:00 start time and a 17:00:00 end time. The ship-to business partner's actual calendar has an 8:30:00 start time and an 18:00:00 end time. Both actual calendars are available from Monday through Friday each week.

If the actual calendar indicates that time is available on a day, the day is considered a whole day. Thus, Wednesday is considered a whole day according to the carrier's actual calendar, because one hour is left. The transport will thus take place on Wednesday and Thursday. The default planned receipt date is Friday 7:00:00 according to the carrier's actual calendar. However, also, taking into account the ship-to business partner's actual calendar, the default planned receipt date is Friday 8:30:00.

Note: If the planned delivery date is not specified, LN sets the planned delivery date to the current date.

Activities by Warehousing Order

Starts the Activities by Warehousing Order (whinh2104m000) session.

Activate

Use this command to change the status of the selected order from Planned to Open. For more information, refer to Planned status for warehousing orders and order lines. If the header status is Planned, Modified or when the order lines are set to Planned status, you can activate the order from the warehouse order header.

Deactivate

Use this command to change the status of the selected order from Open to Planned. For more information, refer to Planned status for warehousing orders and order lines. You can deactivate the order at header level only when the header status is Open or Modified and when at least one of the lines is set to Open status. If you deactivate, the order line status changes from Open to Planned.

Process
Activate Warehousing Orders

Starts the Activate Warehousing Orders (whinh2203m000) session.

Related Order

This command is available for multicompany transfers. Use this command to view the transfer order for the related company, which enables you to view information on the items to be transferred in the related company. If you are working in the from-company, click this command to view the related order in the to-company. If you access the order in the to-company, click this command to view the related order in the from-company.

The order number of the transfer order for the related company can be different. The reason is that each company can have different number groups and series for transfer orders.

If you create a transfer order to transfer items to a warehouse in a different company, LN creates the transfer order for both the from-company and the to-company. The from-company is the issuing company and the to-company is the receiving company.