Standard software environment procedure - details

1. Start the Package VRCs (ttadv1511m000) session.
2. On the toolbar, click New. The Package VRCs (ttadv1111s000) details session starts.
3. Enter the respective segment of the identifier for the new package VRC in the Package, Version, Release, and Customer fields.

   In this example you want to create the tcB60O_a_cus VRC. Specify this information:

   • Package: tc
   • Version: B60O
   • Release: a
   • Version: cus
4. Enter or select the package VRC from which you want to derive the new package VRC in the fields in the Derived from area.

   In this example the new VRC must be derived from the B60U_a_stnd VRC. Specify this information:

   • Version: B60U
   • Release: a
   • Version: stnd
5. Click Save, and click Close to return to the Package VRCs (ttadv1511m000) overview session.
6. Quit the overview session.

1. Start the Directories of Software Components (ttadv1115m000) session.
2. On the toolbar, click New Group and enter the new customization package VRC tcB60O_a_cus in the group fields above the grid.
3. On the toolbar, click New to create the new directories for the software components.
4. Type or select the software component for which you want to create a directory in the Software Component. field. It is recommended to specify a directory for each type of software component. In the Path on System field, you can enter the path to the directory on the system. This system can be local, or remote in a client/server environment. Refer to the session help for details.
5. Save the new data and close the session.

To create the package combination to which you can link the customization package VRCs:

1. Start the Package Combinations (ttaad1520m000) session.
2. On the toolbar, click New to create the new package combination. The Package Combinations (ttaad1120s000) session starts.
3. Specify the package combination, for example; b60oacus, in the Package Combination field, and enter the directory where the table definitions of the package combination must be stored in the Table Definition Path field. If the directory does not exist, you will be prompted to verify the creation of the directory.
4. Click Yes to confirm the creation of the table definition directory. The Package Combinations (ttaad1120s000) session restarts.
5. Click Save in the Package Combinations (ttaad1120s000) details session, and click Close to return to the Package Combinations (ttaad1520m000) session.
6. Quit the overview session.

To link the customization package VRC, tcB60O_a_cus, to the customization package combination, b60oacus:

1. Start the Packages by Package Combination (ttaad1121m000) session.
2. On the toolbar, click New Group and enter the customization package combination b60oacus in the group field above the grid.
3. On the toolbar, click New to link package VRCs to the package combination.
4. Specify the package VRC code in the Package Version, Release, and Customer fields. In this example, this code is tcB60O_a_cus. You must repeat this step for all package VRCs that must be included in the package combination. Infor recommends that you include VRCs for all packages, except Tools (tt) and Tools Add-on (tl).
5. Click Rebuild DD on the appropriate menu to rebuild the runtime data dictionary of domains, table definitions, sessions and file redirections. If necessary, the tables of the companies that are linked to the package combination will be reconfigured to the new data definitions. Before the process actually starts, the Select Device (ttstpsplopen ) session starts, which you can use to print an error report of the errors that occur during the procedure. When the process is completed, a message appears that shows the number of events that have occurred.
6. Click OK to return to the Packages by Package Combination (ttaad1121m000) session.
7. Quit the session when the process is completed.

To link the new package combination b60oacus to only one (existing) company:

1. Start the Change Package Combination by Company (ttaad1101m000) session.
2. Specify the old and new package combination.
3. Specify the company that you want to link to the new package combination in the Selection Range group box.
4. Click Change to start the process.
5. Click Close when the process is completed to quit the session.

To link the new package combination b60oacus to a large range of users:

1. Start the Change Package Combinations for Users (ttaad2200m000) session.
2. Specify the old and new package combination.
3. In the Selection Range group box, specify the users who you want to link to the new package combination.
4. Click Change to start the process.
5. Click Close when the process is completed to quit the session.

Change the package VRC in the developer authorization template to tcB60O_a_cus.

1. Start the Developer Authorization Template (ttams1151m000) session. This session is password protected.
2. Specify the required password. The session now starts.
3. On the toolbar, click New Group and specify the developer authorization template to which the new VRCs must be added.
4. Click New. The Developer Authorization Template (ttams1151m000) session starts.
5. Specify the new package VRC.
6. In the Authorization for group box, specify the modules and language for which the developers must be authorized.
7. On the toolbar, click Save and Close, to return to the Developer Authorization Template (ttams1551m000) overview session.
8. On the appropriate menu, click Convert Changes To Runtime DD to convert the template data to the run-time data dictionary.
9. Quit the session when the process is completed.

To be able to use this test tool, you must first specify the companies where the test data must be stored.

1. Start the Initialize Tools Add On (tlcom0200m000) session. This session will create tables required for the public test tool and to store data from Tools Add-ons (tl) regression tests.
2. You can setup a different company number for public test tool and regression tests. In the Public Test Tool Data and Analyzer Data fields, specify the company numbers in which the corresponding data must be stored. For example, specify 300 and 101 respectively.
3. Click Next to continue. An overview of the actions to be executed is displayed.
4. Click Finish to create the tables in the specified companies.

To change the package combination of a normal user to b60oacus:

1. Start the User Data (ttaad2500m000) session.
2. Double-click a user in the grid.
3. In the Package Combination field, enter the package combination of the new environment. In the Company field, enter a company that is linked to this package combination. Click Save and Close.
4. Select the user, and on the appropriate menu, click Convert Changes To Runtime DD. The Convert Changes to Runtime DD (ttams2200m000) session starts.
5. Based on your specific requirements, select the appropriate check boxes and then click Convert to Runtime to change the user’s package combination in the runtime data dictionary.
6. Click Close to quit the session.