Project (tppdm6600m400)Use this session to maintain master project data for each project. The project data defines all aspects of the project. Many fields depend on the parameter sessions for defaults or input. So, if a field has incorrect data, check the related field in the parameter sessions. Note Use the Maps section to view the location of the Address Code Project and the Ship-from Address. You must select only one record at a time. If the Authorization and Security functionality is implemented for Project, the usage of various fields such as project, warehouse, purchase contract, and enterprise unit are determined based on the specified permissions. See Authorization and Security Use the Rotate Currency button to see amounts in the different home currencies. The revenue recognition method and the cost of goods sold method is defined at the project, extension. RR and COGS can also be determined at the element and activity level depending on the method of RR and COGS selected. The usage of element and activity depends on whether the project is controlled by element or controlled by activity. On the project level and extension level, you can set a lower and upper limit on the revenue to be recognized. You can access the following sessions using the tabs in this session:
General Project Project Enter a new project code. You can choose to create a project from:
Description The description or name of the code. Project Status The status of the project. The project status is important for following the right course throughout the project life cycle. Note For projects of type Template, the project status does not hold any significance. General Project Manager The employee who is the manager for the project. Note When you specify a value in this field, Infor LN checks if the specified employee’s data exists in the Employees - People (bpmdm0101m000) session and the employee is Active (based on the First Date of Employment and the Last Date of Employment). Else, a warning message is displayed. You can ignore the message. Description The description or name of the code. Project Management Office The code of the project management office. Note You must specify a value in this field to perform intercompany trade transactions. The integration lines generated when this field is empty in relation to intercompany trade order (ITR) are different than when the ITR lines are generated. Address Code Project The code that identifies the location where the deliverables for the project can be sent. In the US this address code is used for the tax provider. Description The description or name of the code. Ship-from Address The address entered here will be used as the standard ship-from address for the project deliveries and services. Enterprise Unit A financially independent part of your organization that includes entities such as departments, work centers, warehouses, and projects. The enterprise unit's entities must all belong to the same logistic company, but a logistic company can contain multiple enterprise units. An enterprise unit is linked to a single financial company. When you carry out logistic transactions between enterprise units, the resulting financial transactions are posted to the financial companies to which each enterprise unit is linked. Description The description or name of the code. Financial Company The financial company to which the enterprise unit is linked. If the financial company is not the same as the operational company, the currency system of the financial company will be used for Project. Description The description or name of the code. Project Currency If the project is performed in another country, the project currency is useful for monitoring. This currency can be an external currency that is not specified as one of the home currencies. Description The description or name of the code. Project Procedure The project procedure code. A project procedure comprises various steps, also called activities, to update the budget status, update the work authorization status and generate control data. For more details, refer To use project procedures. Description The description or name of the code. Search Key An alternative form of a description used for convenience during searching. Typically, it is an abbreviation, an acronym, or a mnemonic alternative to a full description. Search Key II The second search key for the item. Project Type Internal Project If this check box is selected, the project is an internal project. An internal project has no contractual obligations to a business partner and its costs will be booked to the profit and loss account. Next to the simple internal project there is also a possibility of making a capital project if you check the Internal Project check box and the Capital Project check box. A capital project is an internal project that will be capitalized on the balance sheet as a fixed asset after completion. Capital Project A project used for internal use in which deliverables can be booked as fixed asset but delivery of goods to customers is not possible. In a capital project, you are the business partner. Note The check box cannot be selected if financial transactions have been processed for the project and the project has already been made Active. Template If this check box is selected, the project is of the type template and cannot be used for actual projects. This project can be used only for copying projects. Note You can select the check box only if the status of the project is Free. Hierarchy Type A project must belong to one of the project types. Main Project The main project to which the subproject belongs. Description The description or name of the code. Program The code that identifies the program linked to the project. Description The description or name of the code. Use Organization Breakdown Structure If this check box is selected, the organization breakdown structure (OBS) is used for the project. Note You can view this field only if the All Activity Types check box is selected in the Project Parameters (tppdm0100s000) session. Organization Breakdown Structure The code of the organization breakdown structure. Note You can view this field only if the All Activity Types check box is selected in the Project Parameters (tppdm0100s000) session. Description The description or name of the code.
Financial Agreement Specification Contract The code of the contract linked to the project. Description The description or name of the code. Sold-to Business Partner The code of the sold-to business partner linked to the project. Description The description or name of the code. Contract Amount The total amount of the project contract. For a time-phased budget version, the contract amount is expressed as follows: contract amount = profit fee + management reserve + distributed budget + undistr. budget The contract amount is used to determine the invoice limit. In Home Currency The contract amount expressed in home currency. Contract Type This field determines how the project contract amount is calculated. This affects the invoicing in Project. Invoice Type The invoice type you choose determines the way invoicing is handled in Invoicing. Payment Terms for Financial Analysis Material The average number of days between order date and payment date. Labor The average number of days between order date and payment date. Equipment The average number of days between order date and payment date. Subcontracting The average number of days between order date and payment date. Sundry Cost The average number of days between order date and payment date. Business Partners The average number of days between order date and payment date. Fixed Assets Asset Number If you select the Capital Project check box and you want to link the project to a fixed asset code, you can enter an asset number and an extension. The fixed asset will be appreciated at the closure of the project's actual costs. Zoom to the Assets (tffam1500m000) session to enter the fixed asset. Description The description or name of the code. Asset Extension The asset extension is a description field. You can enter up to 15 characters. You can use this field to, for example, choose from a range of fixed assets that belong to one asset number in the Assets (tffam1500m000) session. Financial Result Status This field determines the procedure for calculating the financial project result in Financials. Allowed values Budget Methods Budget by The project budget type determines the way you look at your budget. You can budget the project by:
Control by The project can be controlled by:
Note The project budget uses project control to:
Budgeting Method The budgeting method for the project. Use Extensions in Budget If this check box is selected, extensions are used in the budget and in cost control. Main Project Budgeting If this check box is selected, the budget cost analysis and the generated control data only include the budgeted costs of the main project itself. The actual costs include both the cost of the main project and the costs of the corresponding subprojects. If this check box is cleared, the budget cost analysis and the generated control data include both the budgeted cost of the main project and the budgeted costs of the corresponding subproject. Actuals Budget Top Element The top element of a project element or activity structure. The project budget is composed of a tree-like structure. The structure has only one top element or activity. Description The description or name of the code. Budget Cost Analysis Based on the project budget, several budget cost analyses can be performed in the Generate Budget Cost Analysis (tpptc3200m000) session. Each budget cost analysis is stored under the combination of project code and budget cost analysis code. For each project it is indicated which budget cost analysis code must be regarded as actual. Description The description or name of the code. Time-Phased Budget Analysis For a project, multiple time-phased budget analysis codes can be present. This code is used as a default value in sessions such as Generate Structure and Top-Down Budget (tpptc5210m000) session. Description The description or name of the code. Exchange Rate Type Budget The default exchange-rate type used for budget cost analysis across the package. The user can change the value while generating the budget cost analysis. Description The description or name of the code. Exchange Rate Type Costs The default exchange-rate type used for purchase cost analysis across the package. The user can change the value while generating the budget cost analysis. Exchange Rate Type Revenues The default exchange-rate type used for sales cost analysis across the package. The user can change the value while generating the budget cost analysis. Path for Budget Labor Rate Priority 1 The budget labor-rate search path for the labor cost rate and the sales rate in labor lines in the budget. Defaults Budget Date The budget date that is used as the reference for currency transactions. By default, the budget date as specified for the project is added to the new budget lines. Labor Cost Rate The project-specific labor cost rate is one of the three possible default values for the labor rate if the following is recorded:
The other defaults are:
Labor Cost Transaction Date Whenever the general cost rate is changed in a project, the transaction date of the cost rate is automatically filled with the system date, so that it is always known when the latest cost rate change took place. In Home Currency The cost rate in home currency. Description The description or name of the code. Labor Sales Rate A general sales rate for the labor costs in a project. Labor Sales Transaction Date Whenever the general sales rate is changed in a project, the transaction date of the sales rate is automatically filled with the system date, so that it is always known when the latest sales rate change took place. In Home Currency The cost rate in home currency. Rate Unit For example, the cost rate is 25 EUR and the unit is hours, this means the costs are 25 euros per hour. Description The description or name of the code. Planning Scheduling Active Plan The project plan used in the project. This field must be filled if the costs are controlled by the activity budget type. Note You can view this field only if the Use Plan check box is selected in the Project Planning Parameters (tppss0100s000) session. Description The description or name of the code. Planning Method The planning method is used to calculate the earliest and latest start and finish dates for the project. Allowed values
Note
Start Date This date is default for plans and of importance while running budget cost analysis and using surcharges. The start date is used to decide what (budget) surcharges are valid for the budget cost analysis. Lack of a start date will result in all surcharges to be used. Note If you use an extension for a fluctuation with invoice calculation method Actual Costs (set in the Extension (tpptc0110s000) session), it is mandatory to enter the project start date. Finish Date The finish date of the project. Substantial Completion Date The agreed date of the first completion of the project. This field only provides information. Project Lead Time Type The way time is viewed at in a plan. Estimated Lead Time This field enables you to record the time which is expected to be needed for the execution of a project. The field only serves to provide information. The required project time can be expressed in workdays or in calendar days, depending on the setting of the Project Lead Time Type field. Final Project Lead Time This field indicates the project lead time according to the specifications. The field is only used to provide information. The required project time can be expressed in workdays or in calendar days, depending on the setting of the Project Lead Time Type field. Phase You can link a phase to a project irrespective of the status. A phase can be used to differentiate the various stages of a project. For example, analysis, proposal, negotiation, and so on. Example You can link the Phase code 001 with description Analysis to several projects. It is now possible to easily filter all projects that are in the Analysis phase. Description The description or name of the code. Calendar The calendar which specifies the working hours of the Project. The description or name of the code. / The code for the availability type. The availability type and the applicable calendar are used to calculate the start and finish time of the activity to be performed. The value in this field defaults from the Project Planning Parameters (tppss0100s000) session. Note This field is enabled only if the Calendar field is specified. Actual Calendar Indicates the calendar code and the availability type linked to the project. Description The description or name of the code. Calendar Origin Indicates the entity where the Actual Calendar is defined. Requirements Planning Commit Inventory On Specify the phase when the inventory in the warehouse must be committed to the project, based on the availability. Allowed values:
Note An inventory reservation in Project is an inventory commitment in Warehousing. However, this value can only be modified if no inventory is reserved for the project. Priority Supply Warehouse A general warehouse that receives the deliveries for more than one project. The goods are sent from the priority supply warehouse to the project or the project warehouse. Note This field is mandatory only when the Warehouse Management (WH) check box is selected in the Implemented Software Components (tccom0100s000) session. Description The description or name of the code. Default Project Warehouse A project warehouse is used to store the delivered goods coming from the priority supply warehouse. Enter a warehouse in this field if you want to use one warehouse for the project. All inventory will be sent to that warehouse. You can also leave this field empty and link the warehouse on a lower level to an element or activity to improve inventory control. Planning Group The code that identifies the planning group, defined in the Planning Groups (tcpeg0101m000) session. Note If the project pegging functionality is implemented, a value must be entered in this field for the projects with the status Active. Description The description or name of the code. Installation Group The default installation group used to generate a physical breakdown in Service or to generate service orders from Project. Shipping Route The route linked to the project. Description The description or name of the code. Carrier/LSP The carrier / LSP for the project. Description The description or name of the code. Control Physical Progress Material Phys. Progress The level at which you can record the progress for this cost type. Labor Phys. Progress The level at which you can record the progress for this cost type. Equipment Phys. Progress The level at which you can record the progress for this cost type. Subcontracting Phys. Progress The level at which you can record the progress for this cost type. Sundry Cost Phys. Progress The level at which you can record the progress for this cost type. Register Progress Logging Control Data Generation Date The last date the Generate Control Data (tpptc1230m000) was run for this project. Control Data Generated By The logon code of the user who last ran the Generate Control Data (tpptc1230m000) session for this project. Description The description or name of the code. Last History Posting Date The latest date on which actual cost transactions were posted to the history. This date is automatically saved by LN during execution of the Post Transactions (tpppc4202m000) session. This field is only used to provide information. User Last History Posting This field shows the logon code of the user who last posted actual cost transactions for this project to the history. The value of this field is automatically updated during execution of the session. Description The description or name of the code. Last Build Actual Cost Control Date The date on which the Build Actual Cost Control (tpppc4803m000) session for this project was last run. User Last Control Data Generation The logon code of the user who last ran the Build Actual Cost Control (tpppc4803m000) session for this project. This field is only used to provide information. Description The description or name of the code. Path for Hours Labor Rate Priority 1 The labor rate for hours registration search path for the labor cost rate per hour and the sales rate per hour in the labor lines. Allowed values Project Creation User The user responsible for the project. The default value is the login name of the user who creates the project. This value can be changed. Description The description or name of the code. Project Creation Date The date the project is created. Project Origin Indicates how the project was created:
Source If applicable, the source from which this project was copied. Description The description or name of the code. Estimating Estimating Rejected A project can be rejected after being estimated. This field indicates whether the estimated project can continue with its life cycle of estimating, budgeting and invoicing. Reason Use this field, for example, in situations where a particular estimate is either rejected or the project is delayed. The reason code is mandatory if the estimate is rejected. Description The description or name of the code. Resulted in Project This field is filled only if different series are used for projects and estimates. The target project is displayed, after the copy process. Description The description or name of the code. Originated from Estimate This field is filled only if different series are used for projects and estimates. The estimate project used as the source is displayed. Last Launched by The logon code of the person who has launched the estimate to a project. The logon will be registered from the last launch. Description The description or name of the code. Date of Launch The latest date that the launch process is run. Interim Results Revenue Recognition Revenue Recognition Method Select the method for revenue recognition:
Calculation Method The method to calculate the percentage of the work completed. Allowed values Note This field is enabled only if the Revenue Recognition Method field is set to Percentage of Completion. Default value is Cost to Cost. You can modify this value only if the project status is Free or Active. To calculate the revenue to be recognized based on the Percentage of Completion method:
Percentage of Completion The percentage of completion of the project. You must multiply this percentage with the contract amount to calculate the revenue to be recognized. Note You can manually enter the percentage of completion or click Calculate to get the calculated value. LN calculates the percentage using the following formula: percentage of completion = costs (incurred) / estimate at completion cost or percentage of completion = number of actual hours spent on the project / the total hours forecasted for the completion of the project. Earned Revenue Factor Specify the earned revenue factor. You must multiply this factor with the cost to calculate the revenue to be recognized. Note You can manually enter the earned revenue factor or click Calculate ERF to get the calculated value. LN calculates the factor using the following formula: ERF = project contract amount / total budgeted costs To calculate ERF, the project status must be Active, because the total budgeted cost is known only for active projects. Base for Earned Revenue Factor The method based on which the Earned Revenue Factor Method is calculated. Allowed values Revenue Recognition Threshold The minimum percentage completion expected before revenue is recognized. Note Only if the percentage completion is greater than or equal to this field, revenue is recognized when interim results are generated using the Generate Interim Results (tpppc3250m000) session. However, if the Profit Percentage is negative, revenue will be recognized irrespective of minimum percentage completion being met or not. Default value 0 Revenue Recognition Limit The limit on the revenue to be recognized. Specify a maximum percentage. Note The value can be changed. The revenue recognition limit is valid for all RR methods except the Completed Project method. The percentage times the contract amount gives the maximum revenue that can be recognized (until the completion of the project). This percentage is ignored when the project is complete and the final revenue (and COGS) is posted. Default value 100 Cost of Goods Sold Method Select the method to calculate the cost of goods sold: Percentage of Completion The percentage of completion of the project. You must multiply this percentage with the estimate at completion (EAC) to calculate the cost to be recognized. Note
Profit Percentage Specify the profit percentage. The COGS is calculated on the basis of this percentage and the revenue recognized. Note You can manually enter the percentage or click Calculate to generate the calculated value. When the COGS is determined at project level, LN allows you to select the base to calculate the profit percentage. You can either select Budget or select Estimate at Completion as the base to calculate the profit percentage. If the profit percentage is calculated based on the Estimate at Completion (EAC), the application calculates the percentage: profit percentage = (Contract Amount - EAC) / contract amount or If the profit percentage is calculated based on the budget, LN calculates the percentage: profit percentage = (Contract Amount - budget) / contract amount Alternate Interim Results Scenario Description The description of the primary results. Scenario Description The description of the alternate results. Miscellaneous Classification Acquiring Method For statistical reasons you can enter the method you used to acquire this project. Description The description or name of the code. Financing Method The code that identifies the financing method used for this project. Description The description or name of the code. Business Sector The code that identifies a business sector. Description The description or name of the code. Geographical Area The geographical area. Description The description or name of the code. Category A user-definable classification for projects. Description The description or name of the code. Group A user-defined classification of projects. Description The description or name of the code. Picture Picture If required, you can add an image. Text Text Use this field to enter a text related to the project. Miscellaneous Sundry Cost Code for Provisional Amounts Costs relating to an extension of the Provisional Amount type are posted to a sundry cost object. This field identifies the code of the sundry cost object (standard or project-specific) used for this project. This field takes its default value from the Sundry Cost Code for Provisional Amounts field in the Projects (tppdm6100m000) session. Description The description or name of the code. Default Activity The activity is used as default in processes in which an amount must be posted to an activity and the activity is not specified. This occurs in the following cases:
Note The activity code is defaulted from the following sessions:
The activity must be of the type Control Account or Work Package. Description The description or name of the code. Use Surcharges The surcharges used to calculate the indirect costs for the project. If surcharges are used, you can select if the surcharges must be applied for the budgeted costs, actual costs, or for both the budgeted and actual costs. Sufferance Tax The code that identifies the sufferance tax that applies to this project. Description The description or name of the code. WIP Sales Value Surcharge The surcharge percentage calculated on the total costs of the project to determine the financial value of the work in process (WIP). This surcharge percentage is used only if the Sales Value Surcharge Costs in WIP check box in the Project Accounting Parameters (tpppc0100s000) session is selected.
Activate Activate a project or link a project to a contract link. Calculate Calculates percentage of work completed. Calculate ERF Calculates the earned revenue factor using the following formula: ERF = project contract amount / total budgeted costs To calculate ERF, the project status has to be Active, because the total budgeted cost is known only for active projects. This button is available only if the Revenue Recognition Method field is set to Earned Revenue Factor. Calculate Profit Percentage Calculates the profit percentage using the following formula: profit percentage = budget / contract amount This button is available only if the Costs of Goods Sold Method field is set to Profit Percentage. Change Interim Results Method LN allows the user to modify the interim result calculation method such as Cost to Cost, Method, and Method. Switch Primary and Alternate Results Settings Selects an alternate setting based on which the interim result must be calculated. For example, if the Primary scenario is specified, you can select the option to use another setting for the scenario, based on which the interim results are calculated. Consequently, the alternate interim result setting is considered as the primary interim result setting.
| |||