The date and time that the parameters were changed. The parameters are valid up to the effective date of a more recent parameter setting. The current set has no effective date.
Product Configuration Parameters (tipcf0100m000)Use this session to set the parameters that control the functioning of the Product Configuration (PCF) module. In the Product Configuration module, you can define constraints by generic item, or change the descriptions of predefined variables. A number of variables that are predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. Once you saved the parameters, you can no longer change them. Note The Constraint Expression tab is only available when the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session.
General Introduction Date The date and time that the parameters were changed. The parameters are valid up to the effective date of a more recent parameter setting. The current set has no effective date. Description The description of the parameter set. For example, you can indicate why you changed the parameters. Multilevel PCF Choice Structure If this check box is selected, product configuration is applied at multiple levels of the generic product structure. You can use a multi-level question structure for the configuration of product variants. The advantage of using this structure is that product features are linked to the proper generic items, which results in a more modular configuration structure. The structure also enables LN to include or exclude certain sets of questions during the product configuration process. Note The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session. PCF in Customer's Language If this check box is selected, the product configurator displays the descriptions of features, options, and constraints in the customer's language. This feature is an important aid for a proper communication with the customer, particularly in the case of telephone sales. If this check box is cleared, the product configurator displays the descriptions of product features, options and constraint validation messages in the employee language. Note The Product Configuration module is language-independent, which means that you can record, for example, the descriptions of product features and options in any language. This is especially of value for the communication with customers and other external relations. The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session. Display Implicit Options If this check box is selected, implicit option values are visualized by the product configurator. This means you use constraints to determine whether or not certain product features or questions must be filled, and whether a default option value is applicable. With the input of an implicit option value you can also use constraints to indicate whether or not the relevant product feature must be visible during the product configuration process. Note
If this check box is cleared, implicit options are not visualized by the product configurator. Generate Sales Quotation Texts If this check box is selected, LN generates sales quotation texts for sales quotations after the product configuration process. Note The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session. Identifying Item Code This parameter affects the way in which LN generates the item code for the product variant when you run the Generate (Project PCS) Structure for Sales Orders (tdsls4244m000) session in the Project Control module. If this check box is selected, the customized item code that LN generates in the Project Control module is identical to the generic item code, or to the code generated using the Generic Item - Settings for Data Generation (tipcf3101m000) session. If this check box is cleared, LN generates a new item code for each product variant. To generate the new item codes, LN adds a sequence number to the generic item code. You can specify the exact position of this sequence number in the Sequence Number of Item Code from Position and Sequence Number of Item Code to Position fields of the current session. Note
Use Standard to Order Item BOM In the Product Configuration (PCF) module, you sell variants of a certain product. Product is manufactured according to the customer's wishes by selecting components, or subassemblies from a list of predefined features and options. If you configure a generic item in Product Configuration (PCF), the generic bill of material (BOM) is converted to a customized product structure. If a specific configuration is selected often, either on end item or subassembly level, you can create a generic item in the Item Base Data (IBD) module. The parameter determines the use of generic items in the customized product structure. You can use the Generate (Project PCS) Structure for Sales Orders (tdsls4244m000) session to create a customized product structure. If this check box is selected, generic items may be used as parts of the customized BOM. The generic item must be defined in IBD to be available, the components are selected during the generation of the PCS project. If this check box is cleared, generic items may be used in the BOM, but all components must have the Customize check box selected in the Items (tcibd0501m000) session. To use a standard-to-order item multiple times on a PCS project The use of this Use Standard to Order Item BOM parameter is twofold. The parameter not only concerns the selection of components for standard-to-order items during project generation as described above, it also determines whether a customized standard-to-order subassembly can be used multiple times in a PCS project for different parent items. If this check box is cleared, two parent items in a specific PCS project cannot have the similar customized standard-to-order subassembly as a component. After a specific subassembly is used in the first parent item, you cannot use a similar subassembly in a second parent item anymore. The reason is that if a subassembly is used in a specific parent item, it receives a product variant number that conflicts with the product variant number of another parent item that requires the subassembly. If this check box is selected, a similar customized standard-to-order subassembly can be used in several parent items for the same project. The first parent item in which the subassembly is used assigns its product variant number to the subassembly. Despite of this product variant number, the subassembly can be used in other customized product structures, with other product variant numbers. Note If this check box is selected, and you change a customized standard-to-order subassembly in one of the parent items, the subassembly is also changed in the other parent items in which the subassembly was used. Use Standard Item for Configuration If this check box is selected, you can copy the customized item product structure to the selected standard item configuration in the Copy Customized Product Structure to Standard Structure (tipcs2232m000) session. If this check box is cleared, the customized item will not be copied to a standard item configuration. Allow reuse of Configurations If this check box is selected, and you enter the same generic item with the same options on multiple lines on a sales order, LN will use the same item code on both lines, if that is possible. This only applies to Job Shop configuration, not to Assembly. If this check box is cleared, and you enter the same generic item with the same options on multiple lines on a sales order, LN uses a different item code for each sales order line. It is not permitted to use the same customized item with different variant codes on multiple order lines. Note It is not always possible to use an item code on more than one sales order line. For more information, refer to Multiple sales order lines with identical product configurations Allow reuse of Item Structure If this check box is selected, reuse of a previously configured customized component: Reuse is allowed if:
CPQ Background Configuration External Sales Configurations If this check box is selected, the sales configuration can be received from an external source via Sales Order BOD. The sales configuration is stored in LN. Asynchronous Processing If this check box is selected, the CPQ background configuration process is performed in asynchronous mode. Note Only applicable if the External Sales Configurations check box is selected. Sequence Number of Item Code from Position This field determines the starting position of the generated sequence number for the Identifying Item Code. Note
Caution! For generic items with the With PCS check box cleared in the Items (tcibd0501m000) session, the current field and the Sequence Number of Item Code to Position field determine how many positions the generated sequence (combination of product variant and sequence number) may have. A position length that is too limited may cause the product variant number to be partly displayed. Example
Because the total number of positions is four (28, 29, 30, and 31), a fraction of the product variant is used (78) to generate the sequence number.
Because the total number of positions is 20 (28 - 47), the generated sequence number can contain the complete product variant number (12345678). Sequence Number of Item Code to Position This field determines the end position of the generated sequence number for the Identifying Item Code. Note
Caution! For generic items without a PCS project, the current field and the Sequence Number of Item Code from Position field determine how many positions the generated sequence (combination of product variant and sequence number) may have. A position length that is too limited may cause the product variant number to be partly displayed. Example
Because the total number of positions is four (28, 29, 30, and 31), a fraction of the product variant is used (78) to generate the sequence number.
Because the total number of positions is 20 (28 - 47), the generated sequence number can contain the complete product variant number (12345678). Product Configurator Version The product configurator version. The use of the product configurator can be divided in two parts:
Note you can always switch from one version to another. The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session. Interpreter Version Constraints must be tested to ensure that no errors are present. As a result, during runtime, constraints are continually read in, and interpreted or compiled. The advantage of the Interpreter Version mode is that you can immediately test a generic product model after changes are made to certain constraints, without first having to recompile all constraints. A disadvantage is that the performance of the product configurator is reduced. Object Version This version is available for the operational situation. During runtime, constraints are directly executed by the product configurator as objects, without the necessity to repeatedly read in and interpret or compile constraints. Compared to the interpreter version, the object version may result in a considerable performance improvement, especially in the case of more complex constraints. Prior to using the object version, all constraints must be compiled in the Compile Constraints by Configurable Item (tipcf2201m000) session. For this purpose, you need the compiler 'bic6.2' of Enterprise Server. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Product configurator version. Number Group for Product Variants The number group for product variants. Constraint Source Directory Before constraints can be compiled, this session first generates constraint sources. These constraint sources are stored in the <path.name>/ppcfcons<company.number> directory of your file system. Enter the path
name of the directory in which you want to store the constraint source. You can
enter the full path name or use the current directory as your departure point.
In the latter situation, the path name must begin with a period Note The system adds
the name of the constraint source directory to the path name automatically, but
you can also add the name yourself. The next time you use this session, the
saved directory is presented as the default. In case no directory has been
saved, the The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session. If no directory
has been saved, and you are working on a system that has no Constraint Object Directory Enter the path name of the directory in which you want to store the constraint objects. You can enter the full path name or use the current directory as your departure point. In the latter situation, the path name must begin with a period and a slash. Note The system adds
the name of the constraint object directory to the path name automatically, but
you can also add the name yourself. If no directory has been saved, the The check box is not visible unless the Product Configurator (PCF) check box is selected in the Implemented Software Components (tccom0100s000) session. If no directory
has been saved and you are working on a system that has no file called " Constraint Expression Input Option Value The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed. The Input Option Value variable enables you to indicate for each product feature whether or not the product configurator must prompt you to enter an option value. This variable has the following features:
Display Option Value Indicates for each product feature whether the product configurator must display that feature during the product configuration process in case of an implicit option value. This variable has the following features:
Note Value is true if the Input Option Value field is true. Validating The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed. This field indicates whether or not the product configurator validates a given product configuration. As a result, you can control the product configuration process and also prevent the configuration or generation of unallowed product variants. Note that product configuration covers all generic product information, such as product features and options, generic item data, generic bills of material, generic routing, and generic price lists. This variable has the following features:
Message The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed. The Message field enables you to generate messages during the product configuration process. These messages are displayed as warnings, notices, or explanations. Messages can be recorded in constraints in the form of texts or text blocks. When you have chosen product configuration in the customer's language, you can enter message in constraints in any language. Consequently, the product configurator generates and displays the message in the language linked to the customer's language code. This variable has the following features:
Note If a message is recorded in a foreign language, the (system) language code must be added to the variable Message. For example:
Item Data The Product Configuration (PCF) module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed. The data enables you to let the product configurator determine the data of a product variant item, such as item code, item description, material, size, norm, and item text. The variable data can be used in the "parameter substitution" part of a generic item data constraint. This variable has the following features:
Note Text blocks for item text generation have first priority. Price The Product Configuration module enables you to record constraints per generic item. A number of variables predefined in the Product Configuration Parameters (tipcf0100m000) session are used in these constraints. These variables can be filled only once. This means that once product constraints are defined, the descriptions of the variables can no longer be changed. With this field you can let the product configurator calculate the purchase or sales price for a product variant, based on, for example, a formula. The final purchase or sales price for a product variant may be composed of multiple price and/or surcharge components. Some data can be recorded in the generic purchase or sales price list for each generic item. This variable has the following features:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||