Vendor Ratings by Period (tdpur8102m000)

Use this session to maintain and to display vendor ratings by criterion and by period.

This session displays all periodic results, up to and including the current period, for the specified year.

The Vendor Ratings by Period (tdpur8102m000) session also stores the period ratings for a business partner, when LN calculates the overall vendor rating with the Update Vendor Rating (tdpur8850m000) session. In this case, the Criterion Type field and the Criterion field are empty to make clear that the displayed vendor rating is the period rating for the business partner or the period combination.

If you change the vendor rating, the following recalculation takes place:

  • If the method to calculate the overall vendor rating is Smoothing Factor, LN recalculates the overall vendor rating as follows:

New R = Current R + (factor * (new period R - old period R))

New RNew overall vendor rating
Current RCurrent overall vendor rating
New period RNew overall rating for the current period
Old period ROld overall rating for the current period
FactorSpecified in the Vendor Rating Parameters (tdpur0100m800) session
  • If the the method to calculate the overall vendor rating is Moving Average, LN recalculates the overall vendor rating as follows:

New R = sum of (rating * value) / sum of (value)

RatingThe rating for the period
ValueThe total value, the total quantity or the total number of purchase order lines for the period.
SumAll periods that apply to the business partnerare taken into account. You can specify the number of periods, that are taken into account, in the Vendor Rating Parameters (tdpur0100m800) session.

 

Business Partner

The business partner for whom LN calculates the vendor rating.

Allowed values

You can only enter business partners of the types:

Criterion Type

You can select one of the possible criteria types to maintain the vendor rating.

Criterion

The subjective criterion for which LN lists the vendor ratings by period.

Period Table

An alphanumeric code that identifies a group of defined time intervals.

Default value

LN retrieves the period table, which is used for vendor rating, from the Vendor Rating Parameters (tdpur0100m800) session.

Overall Vendor Rating

The vendor's overall rating.

Year

The year in which the period falls and for which the vendor rating is calculated.

You can calculate the vendor ratings on a monthly basis. For example, if you fill in the year 2000 and the period 11, this represents November 2000.

Vendor Classification

You can classify the ratings by different classes instead of showing the raw ratings. You can assign a one-letter code to each class. So, you can have A grade vendors.

Example

In the last column you can see by which class ratings are classified.

ValueRating codeDescriptionRatings in the classes
20ZNot tolerable0 - 20
40PPoor21 - 40
60AAverage41 - 60
80GGood61 - 80
100OOutstanding81 - 100

 

Vendor Classification

The rating class's description.

Note

You must not assign a description such as Top rated vendors, because you can also rate other issues such as items, buyers, and so on. In this case, use a description such as Top rated.

Period

The period for which LN calculates the vendor rating.

You can calculate the vendor ratings on a monthly basis. For example, if you fill in the year 2000 and the period 11, this represents November 2000.

Adjusted Rating

The vendor rating for the business partner/criterion/year/period combination.

The Update Vendor Rating (tdpur8850m000) session initially calculates this rating. You can only change the calculated rating, if you are an authorized user.

The vendor rating which is stated in the Adjusted Rating field, is taken into account when calculating the overall vendor rating for the business partner/year/period combination.

Note

If you change the rating manually and then update the vendor rating, LN takes the changed rating into account. As a result, you cannot have a proper overview of the vendor rating for the period.

As a result, if you consider it necessary to manually change the vendor rating, you should change it at the end of the period, after LN updates the vendor rating for the period for the last time.

Computed Rating

The initially calculated vendor rating for the business partner/criterion/year/period combination.

The rating is calculated by the Update Vendor Rating (tdpur8850m000) session.

You can use the rating to see which ratings are changed in the Adjusted Rating field and also to see what the original value of the changed ratings is. Therefore, you cannot change this rating.

The rating is not taken into account in any calculation.

Total Value

The total turnover of all purchase orders that are processed in the Process Delivered Purchase Orders (tdpur4223m000) session and that fall in the specified period. LN retrieves the data used for calculating the total value, from the Purchase Order Line History (tdpur4551m000) session.

Note

The total turnover in this field is always calculated.

If the Weighting Method field of the Vendor Rating Parameters (tdpur0100m800) session is Turnover, the total turnover is taken into account in the calculation of the rating for the business partner/criterion/year/period combination.

If the Weighting Method field of the Vendor Rating Parameters (tdpur0100m800) session is Piece Count or Order Lines, the turnover value is not taken into account in the calculation of the rating.

Total Quantity

The total quantity of all purchase orders that are processed in the Process Delivered Purchase Orders (tdpur4223m000) session and fall in the specified period. LN retrieves the data, used for the calculation of the total quantity, from the Purchase Order Line History (tdpur4551m000) session.

The total quantity is expressed in the inventory unit.

Note

The total quantity in this field is always calculated.

If the Weighting Method field of the Vendor Rating Parameters (tdpur0100m800) session has the value Piece Count, the total quantity is taken into account in the calculation of the rating for the business partner/criterion/year/period combination.

If the Weighting Method field of the Vendor Rating Parameters (tdpur0100m800) session has the values Turnover or Order Lines, the total quantity is not taken into account in the calculation of the rating.

Total Number of PO

The total number of purchase order lines that are processed in the Process Delivered Purchase Orders (tdpur4223m000) session and fall in the specified period. LN calculates the total number of purchase order lines, based on the data as entered in the Purchase Order Line History (tdpur4551m000) session.

Note

The total number of purchase order lines in this field is always calculated.

If the Weighting Method field of the Vendor Rating Parameters (tdpur0100m800) session is Order Lines, this total number of purchase orders is taken into account when calculating the rating for the business partner/criterion/year/period combination.

If the Weighting Method field of the Vendor Rating Parameters (tdpur0100m800) session is Turnover or Piece Count, the total number of purchase order lines is not taken into account.

Changed By

The employee of your company who changed the value of the Adjusted Rating field.

Default value

LN automatically enters the name of the employee who changed the value of the Adjusted Rating field.

 

Update Vendor Rating
Delete Historical Ratings