Inspection Orders (qmptc1100m000)

An integrated module or package to which an (inspection) order is related.

The order number of the order for which inspection is needed.

The position number on the order to which the inspection order is linked. This can be the position number of the sales order line, purchase order line, or the position number in the BOM.

One of a series of steps in a routing that are carried out successively to produce an item.

The sequence number of the inspection order on the basis of which characteristics are tested on different samples.

Displays a list of the inspection order lines generated for a particular inspection order. These lines correspond to characteristics maintained for each of the test groups that are linked to the quality ID.

Displays the sequence of the inspection that is carried out.

The acceptable quality level defined for a characteristic with Defect Type set to Critical in the Standard Test Procedure (qmptc0110m100) session.

The maximum quantity that can be rejected for a specified sample of a critical characteristic. For a quantity greater than this value, the whole sample is rejected.

The minimum quantity that can be rejected for a specified sample of a critical characteristic. For a quantity greater than this value, the whole sample is rejected.

The acceptable quality level defined for a characteristic with Defect Type set to Major in the Standard Test Procedure (qmptc0110m100) session.

The maximum quantity that can be rejected for a specified sample of a major characteristic. For a quantity greater than this value, the whole sample is rejected.

The minimum quantity that can be rejected for a specified sample of a major characteristic. For a quantity greater than this value, the whole sample is rejected.

The acceptable quality level defined for a characteristic with Defect Type set to Minor in the Standard Test Procedure (qmptc0110m100) session.

The maximum quantity that can be rejected for a specified sample of a minor characteristic. For a quantity greater than this value, the whole sample is rejected.

The minimum quantity that can be rejected for a specified sample of a minor characteristic. For a quantity greater than this value, the whole sample is rejected.

The method in which the acceptable quality level switching is done.

inspection order number.

The ordered quantity.

The code of the item.

Specification of the way in which the samples are taken from the order quantity.

The interval between two samples, expressed in the frequency unit.

You cannot continue the inspection procedure when your order quantity is less than the frequency quantity (for example, when your order quantity is 40, and your frequency quantity is 50). In such a case, no samples can be generated, and you must decrease the frequency quantity.

The sample size is the total quantity that is to be tested. In this field, the sample size is expressed as a percentage of either the order quantity or the frequency (in case you selected Continuous Sampling as the test type).

The unit of the sample size.

The size of the item for which the quality is tested.

The maximum percentage of a test sample that can be rejected for the item quantity to be approved. For example, if the specified Acceptable Quality Level (AQL) is 20%, ERP LN approves the item quantity only if the rejected quantity is less than or equal to 20%.

If this check box is selected, a text is present.

The code to which data is linked that is necessary to check the quality requirements of an item. Since one standard test procedure can be used for a group of products that require the same quality standards and tests, a standard test procedure can considerably reduce time.

The version number of the standard test procedure. When you modify a standard test procedure, LN assigns a new version number.

The definition of how often you take samples to test an order quantity, and what the sample size is.

The date on which the inspection order is created.

The date on which all inspection order lines are completed. This date is updated automatically in the Complete/Process Order Inspections (qmptc1202m000) session and cannot be entered manually.

The part of the sample quantity that is tested. Example A 5 kg sample will be tested by testing 1 kg at a time.

The description or name of the code.

buy-from business partner/ sold-to business partner

If this check box is selected, only a part of the lot is to be inspected.

The sampling rule for the inspection order.

The inspection standard defined for the inspection order.

The severity level defined for the inspection order.

The inspection level at which the inspection must be conducted.

The sampling plan for the inspection order.

The iterations performed for the sampling plan.

The number of times the iteration has been performed.

The part of the sample quantity rejected after testing.

The part of the sample quantity accepted after testing.

The version or revised version of an engineering item (E-item) or a revision-controlled item. Several revisions of an E-item can exist.

The description or name of the code.

The code that is linked to an end item for identification, and which can represent the deviation(s) from the standard end item. You can link an effectivity unit to manufactured items and purchased items.

The description or name of the code.

The code of the team to which the employees are assigned.