A classification of items used to identify if the item is, for example, a generic item, a service item, or an equipment item. Depending on the item's type, certain functions will only apply to that item.
Allowed values
Items - Planning Defaults (cprpd1110m000)Use this session to maintain the global item planning defaults for a combinations of item type and item group. This information is used when you enter a new item in the Items - Planning (cprpd1100m000) session.
Item Type Item Group A group of items with similar characteristics. Each item belongs to a particular item group. The item group is used in combination with the item type to set up item defaults. Planning Cluster The planning cluster to which the item is linked. General Ordering Site The ID of the item supplying site. Supply orders are created for this site and the linked ordering warehouse. Note The site must belong to the same planning cluster as the selected item. Plan Level The level within a hierarchical planning structure. When you plan on a higher plan level, plans are general and less detailed. Example ![[...]](../images/tr_graph_tiglossary_01.gif) Plan level 1 is the highest plan level; the higher the number, the lower the plan level. Supply Source The supply source of the plan item. Note If multisite is active, the supply source is defined in the Items by Site (tcibd1550m000) session. Allowed values Actual Supply Source The default supply source for the selected item group. This source is defined in the Item Defaults by Site (tcibd1551m000) and Item Control and Defaults by Site (tcibd1552m000) sessions. Default Warehouse The warehouse from and to which the item is normally delivered. Note
Planner The employee or department responsible for planning the production, purchase and distribution of items. The planner takes into account the inventory levels, availability of materials, and capacities of resources, and reacts on signals such as rescheduling messages that LN generates. If this field is empty, no planner in particular is responsible for this plan item. Horizons Master Plan If this check box is selected, an item master plan is maintained for the item. Note
Use Time Fence Select or clear the Use Time Fence check box to indicate whether or not you want to use the specified time fence to plan an individual item. If this check box is selected, Enterprise Planning uses the time fence according to the setting of the Generate within in the Generate Order Planning (cprrp1210m000) session to plan orders for an individual item. For example, when you select zero as time fence and you have a sales demand for yesterday, the planned finish date of the planned order is today, because Enterprise Planning cannot plan in the past. If this check box is cleared, Enterprise Planning ignores the time fence you defined for the current scenario. In this way you can overrule the setting of the Generate within check box in the Generate Order Planning (cprrp1210m000) session. If you clear the Generate within check box in the Generate Order Planning (cprrp1210m000) session, Enterprise Planning plans from the time fence for those plan items for which you select the Use Time Fence check box, and within the time fence for items for which the Use Time Fence check box is cleared. In the last case, Enterprise Planning can plan in the past (no time fence). For example, you have a sales demand for yesterday and you disable the time fence field. Enterprise Planning plans the finish date of the planned order for yesterday, because Enterprise Planning can plan in the past in that situation. Time Fence The date until which an item's supply plan and planned orders are frozen. The time fence is expressed as a number of working days or working hours from the date you carry out the simulation. As a rule, Enterprise Planning does not regenerate the supply plan or the planned orders within the time fence. However, you can overrule this behavior when you run a master-plan simulation or order simulation. The time fence is meant to prevent:
Usually, the lead time of an item's production process is a reasonable value for the time fence. Time Fence Select Hours or Days as the time unit in which you want to express the time fence. If you select Hours, LN sets the time fence by taking into account the workable hours, starting from the time point on which LN generates the order planning, and by adding up the value you define in the Time Fence field. Suppose you set the time fence to 7 hours, and the working hours for every day of the week are from 8:00 am to 17:00 pm. If LN generates the order planning on Wednesday, 13:00 pm, it sets the time fence to Thursday, 11:00 am. Forecast Time Fence The date up until which Enterprise Planning ignores the demand forecast when generating master plans and planned orders. In the first few days after the current date, LN expects to receive no more sales orders than the actual sales orders that you already received. This field contains the default value for the Forecast Time Fence field in the Items - Planning (cprpd1100m000) session. Order Horizon The time period for which Enterprise Planning uses order-based planning to plan supply. The order horizon is expressed as a number of working days from the date you carry out the simulation. If the order horizon is zero, Enterprise Planning does not use order-based planning for the item involved. To calculate the order horizon, LN uses the calendar that you specified for the enterprise unit of the default warehouse to which the plan item belongs. If you did not specify an enterprise unit for the default warehouse of the plan item, Enterprise Planning uses the company calendar to calculate the order horizon. Note LN moves the order horizon towards the end of the plan period) in which it falls, because Enterprise Planning must know whether a plan period falls within the order horizon. Planning Horizon The time period for which LN maintains planning data for an item. The planning horizon is expressed as a number of working days from the date you carry out the simulation. Enterprise Planning does not generate supply plans or planned orders that are after the item's planning horizon. To calculate the planning horizon, Enterprise Planning uses the calendar that you specified for the enterprise unit of the default warehouse to which the plan item belongs. Note Enterprise Planning moves the planning horizon to the end of a plan period. Production Schedules The time period for which Enterprise Planning uses planned production schedules to plan the supply. The production schedule horizon is expressed as the number of working days from the date you execute the simulation. If the value is zero, Enterprise Planning does not use planned production schedules to plan supply. To calculate this value, LN uses the calendar linked to the enterprise unit of the default warehouse of the plan item. Note This field is applicable only if Repetitive Production Schedules check box is selected in the Repetitive Manufacturing Parameters (tirpt0100m000) session. Operations Horizon The number of workdays after which the fixed lead-time horizon starts. Note The start of the fixed lead-time horizon is rounded to the end of a plan period. Effectively, this means that the fixed lead-time horizon starts at the next plan period. If the value of this field is greater than the order horizon, this effectively means that no fixed lead-time horizon is used. Important! If the Operations Horizon field is zero, you cannot transfer the generated planned orders to the execution level, because Enterprise Planning links no routing operations to the planned order. You can use this setting only for simulations. Performance aspects The setting of this field could affect system performance and database growth. For more information, refer to Start of fixed lead-time horizon. Lead Times Planned Order The production time of an item expressed in hours or days, based on the lead time elements as defined in the routing operations. Safety The safety time defined in the Item - Ordering (tcibd2100m000) details session. The safety time is expressed in days, or hours. Extra Lead Time Time reserved for extra activities that are necessary to fully complete a planned order. Enterprise Planning treats the extra lead time in the same way as the safety time: the order must be delivered earlier based on the extra lead time. The extra lead time is expressed in days or in hours. Extra Lead Time Select Hours or Days from the pull-down menu as the default quantity to specify the Extra Lead Time. Fixed Delivery The fixed-delivery code for the plan item involved. Note If this field is empty, fixed delivery is not used for the plan item involved. Automate Update Horizons If this check box is selected, LN automatically updates the order horizon and/or the planning horizon when you run the Check Horizons (cprpd1200m000) session. Use Available to Transfer Lead Time If this check box is selected, non-excess cost pegged supply may be transferred to a demand with a higher priority. New supply is raised to fulfill the demand of the original cost peg. Note Non-excess transfer is for inventory and scheduled supply. If a multiplier is applied to the minimum planning horizon you can determine the actual planning horizon. Capable to Promise Online ATP Update If this check box is selected, LN updates the ATP for a plan item online if a planned or actual inventory transaction is recorded for the plan item. LN updates the ATP over the entire planning horizon, but only in the actual scenario. Note Online ATP updates require processing power and therefore performance. You must only use online ATP updates for:
You can select this check box only if the Master Plan check box is selected. Note If you use ATP functionality for an item that has no master plan, no online ATP updates are necessary. In this case, the ATP is always computed online. Critical in CTP A plan item that is critical in CTP must be checked during a component CTP check for a higher level item in the bill of critical materials. A resource that is critical in CTP must be checked during a capacity CTP check for a plan item, if this resource is included in the plan item's bill of critical capacities. Note The performance (speed) of the component CTP check is greatly influenced by the number of components that are checked. The best approach is to have only the most important components checked. Component CTP If this check box is selected, a component CTP check will be carried out for this item, if the CTP of this item is checked, and the requested quantity of the item cannot be covered by the available inventory. Capacity CTP If this check box is selected, a capacity CTP check will be carried out for this item, if the CTP of this item is checked and the requested quantity of the item cannot be covered by the available inventory. Channel ATP If this check box is selected, a channel ATP check is carried out in addition to other CTP checks. CTP Time Fence The number of working days from the current moment, during which LN does not perform CTP checks. The CTP time fence must be smaller than the ATP/CTP horizon. During the period of the CTP time fence, CTP is considered to be zero. CTP Horizon The number of working days from the current moment, during which LN does not perform CTP checks. The CTP time fence must be smaller than the ATP/CTP horizon. During the period of the CTP time fence, CTP is considered to be zero. Master Plan Update Production Plan Select one of the following update options from the pull-down list. Purchase Plan Select one of the following update options on the pull-down menu. Inventory Plan Select one of the following update options on the pull-down menu. Demand Forecast Select one of the following update options from the pull-down list. Options Central Multicompany Planning If this check box is selected, the item can be planned in a central multicompany planning run. If you clear the Multicompany Planning check box in the Planning Parameters (cprpd0100m000) session, this check box is not available. Exclude from Pegging If this check box is selected, the planned item is excluded from pegging. Note This check box is disabled if the plan item is a project pegged item. Critical in Master Planning If this check box is selected, this plan item is critical in master planning. This means that in the master-planning process in Enterprise Planning, this item is treated as a critical component. In order planning, all components are taken into account. In master planning, only critical components are considered. Note Master planning uses an item's bill of critical materials (BCM) for production planning. As a rule, the BCM is derived from the BOM, and contains only those components that are designated as critical in master planning. You can generate a BCM for an item in the Generate Bill of Critical Materials (cprpd3220m000) session. Forecast Forecast-Based Generation Method If this check box is selected, the inventory plan is generated on the basis of the expected demand of the plan item during a certain forecast horizon. If this check box is cleared, the inventory plan is generated on the basis of the safety stock level and the seasonal pattern. Dependent Demand Forecast If this check box is selected, the calculation of the demand forecast is based on the historical demand data of both the dependent demand and the independent demand. If this check box is cleared, the calculation and consumption of the demand forecast is based on the independent demand only. If the calculation of the demand forecast takes the dependent demand into account, the forecast is also consumed by the dependent demand. Forecast Horizon The number of days into the future on which the calculation of the inventory plan is based. The forecast horizon is expressed as a number of calendar days. The forecast-based calculation of the inventory plan is based on the following principle: The inventory plan must be equal to the expected demand during a certain forecast horizon. Example If the forecast horizon is 10 days, LN aims at an inventory level for each plan period that is sufficient to cover the demand for the next 10 days. You can only access this field if the Forecast-Based Generation Method check box is selected. Family Item CTP Family CTP If this check box is selected, a family CTP check is carried out for this item, if the CTP of this item is checked. Family Company The logistic company in which an item family has been defined. The family company makes it possible to redirect CTP checks to a central logistic company. When a customer order is received, the CTP is checked at the family level in the central company. Example A large manufacturer of sports articles produces baseball bats in several states. A central master plan is maintained at headquarters (the central company). Each company has the bat defined as an item, and aggregation relationships have been set up to a product family of baseball bats at the central company. Family Item The family item denotes the item to which the CTP check can be redirected. Allowed values The item must have been defined in the family company. The family item can be an item that you defined in another logistical company. Start of Family CTP Horizon The time period for which LN performs the capable-to-promise (CTP) check for an item on a higher product-family level, instead of the level of the item itself. The start date of the family CTP horizon is defined in the plan-item settings. The end date coincides with the CTP time fence. The application of family CTP depends on the plan period in which the delivery date of a customer order falls:
Work Load Control Constraint If this check box is selected, the availability of the plan item is a constraint in the planning. This field is only used in the Workload Control master planning method. Note You can also select the Constraint check box for items to plan them with the Workload Control master planning method. Note that if the plan item involved is present in more than one planning cluster, you can only have a production plan in one planning cluster, because the warehouse specified in the BOM/BCM determines from which warehouse Enterprise Planning retrieves the components for the plan item involved. For a production plan for item X in planning cluster 1 and a production plan for item X in planning cluster 2, LN uses the same BCM warehouse: either in planning cluster 1 or in planning cluster 2. Master Plan Unit The plan unit for master planning. With a master plan unit, you can choose a master planning engine for an item. Note You do not have to enter a plan unit in this field in the following cases:
Priority Specify the appropriate level of priority if you selected the Constraint check box. Enterprise Planning takes into account the priority of a plan item if you use the workload control as master-planning engine, and you selected Yes or Only in the Consider Item Priority field of the Work Load Control Parameters (cpwlc2101m000) session.
| |||