| | Process Outbound Advice (whinh4200m000)In this session, you can do the following: - Choose Advise to generate
outbound advice, which you can view in the Outbound Advice (whinh4525m000) session.
- Choose Release Advice to
release outbound advices. Releasing outbound advices confirms the outbound
advices and makes it possible to create and print a picking list.
- Choose Direct Release to
generate and release outbound advices in one run.
- Choose Undo to undo both the
outbound advice's generation and the outbound advice's release for the selected
outbound-order line, if available.
Note You can select a range of orders or select specific
orders to be processed: - To select specific orders, click Specific Order Selection. The Specific Order Selection (whinh2800m000) session is started in which you can select
up to ten orders.
- To process another selection of orders, click Reset Selection.
As a result, the application removes the selection you made in the Specific Order Selection (whinh2800m000) session.
- To make a new specific selection, click Specific Order Selection.
Shipping Selection Range Run A code assigned to a group of warehousing order lines when they
are advised. LN assigns
or generates a run number if a user does not manually enter or select a run
number while he generates inbound or outbound advice for a group of warehousing
order lines. This is the case if, for example, a user generates outbound advice
by means of the Generate Advice command in the Outbound Order Lines (whinh2120m000) session. LN assigns run numbers
by user. For example, all inbound advice generated by user A on a particular
day obtain a particular run number, and those generated by user B obtain
another run number. For outbound movements, the user can release outbound
advice, generate picking lists, and confirm picking lists by run. For inbound
movements, the user can generate storage lists and confirm storage lists by
run. Note If you select a run assigned to not fully processed
outbound advice, while in the Run (whinh4100s000) session, the Always Allow Reuse check box is cleared, a dialog box
appears prompting you to select one of the following: - No to
skip this run.
- Yes to reuse this run for the current instance.
- Always Allow Reuse to always allow reuse of this run.
The latter option results in automatic
selection of the Always Allow Reuse check box in the Run (whinh4100s000) session. Overwrite Selection Range If this check box is selected, the set of
warehousing-order lines identified by the run number will overwrite any user-defined selection range. Shipping Selection Range Delivery Date The From and To fields define a range of: delivery dates. Warehouse The From and To fields define a range of: warehouses. Ship-to Type The From and To fields define a range of: ship-to types. Ship-to Code The From and To fields define a range of: ship-to codes. Ship-to Address The From and To fields define a range of: addresses where the goods are shipped. Route The From and To fields define a range of: routes. Carrier/LSP The From and To fields define a range of: carriers. Options Create Cross-dock Orders If this check box is selected, the application will
generate a cross-dock order for any outbound advice shortage. The cross-dock
order's requested quantity will be equal to the inventory shortage. Handle Alternative Items If this check box is selected, and the requested item
is not available and an alternative material has been defined in the bill of material (BOM), the application releases an alternative material. This check box is hidden if the Use Up and Alternative Materials check box in the Implemented Software Components (tccom0500m000) session is cleared. Create Outbound Advice Despite Inventory Shortage If this check box is selected, LN generates outbound
advice even if insufficient inventory is available. If the Negative Inventory check box in the Inventory Handling Parameters (whinh0100m000) session is cleared, this check box is
unavailable. Outbound advice for negative inventory is created for
items within the selection range for which the setting of the Allow Negative Inventory field in the Item Data by Warehouse (whwmd2510m000) session allows outbound advice for negative
inventory. Note If this check box is cleared, you can still manually
create outbound advice through the Outbound Advice (whinh4525m000) session in case of inventory shortage. Recalculate Excess and ATT Inventory If this check box is selected, the application recalculates the available excess inventory and the inventory available to transfer (ATT). Note This field is visible only if the Project Pegging functionality is
implemented. Advice Log Advice Log Indicate whether you want the application to create an
outbound advice log. In the outbound advice log, you can
view the decisions made while the application generates the outbound advice.
You can use the outbound advice log to trace, for example, why a shortage for
the item is reported or why you get other inventory advised than expected. You can view the outbound advice log in
the Outbound Advice Log (whinh3526m000) session. To start the Outbound Advice Log (whinh3526m000) session, in the current session, click Advice Log. Outbound advice log Order Selection Range Include Return Orders If this check box is selected, order lines listed on return orders present in the selection range are included. Include Return Rejects If this check box is selected, purchase return orders meeting specific conditions are included. These conditions are: - Present in the selection range
- Issued from quarantine
- The order lines contain items whose disposition is set to Return to Vendor.
By default, this check box is cleared. Rush Orders only If this check box is selected, outbound advice is only
generated and/or released for rush orders present in the selection range. Load Plan Load Plan If this check box is selected, outbound advice is
generated and/or released based on the load plan. Load The From and To fields define a range of: loads. Shipment The From and To fields define a range of: shipments. Print Errors If this check box is selected, the application prints
the errors that occur when outbound advice is generated and released based on
the load plan. Projected Shipments Projected Shipments If this check box is selected, you can specify the range of projected
shipments for which outbound advices must be processed. Note You can view this field only if Projected Shipments in use check box is selected in Inventory Handling Parameters (whinh0100m000) session. Load The From and To fields define a range of: projected loads. Shipment The From and To fields define a range of: projected shipments. DMS Items Apply DMS If this check box is cleared, standard outbound advice
functionality will apply to DMS items. If this check box is selected, the application will apply direct material supply (DMS) to the items. If DMS Items is set to Only, all
ranges in the session will be unavailable except for the item and warehouse
ranges. If DMS Items is set to Included, all ranges in the session will be
available. Note - In the latter case, any change in ranges applied by the
user can affect the result of DMS on Inventory. For example, if the planned delivery date range is
changed, high-priority demand might be excluded from the outbound advice run,
and lower-priority demand is met first.
- The warehouse range is also taken into account for DMS on Inventory.
- DMS will only be performed for the warehouses that are
defined as supply warehouses in the Warehouse Supply Structure Relationships (whinh6141m000) session.
Ordering Order by Planned Delivery Date If this check box is selected, the orders are processed
in the sequence determined by the planned delivery date/time of the
outbound-order line. If this check box is cleared, the
orders are processed in the sequence as specified in the order-type priority
fields. Order Origin The priority for processing outbound advice. Include If this check box is selected, an outbound advice is
generated and released for warehousing orders with this order origin. Print Print Advice If this check box is selected, the application prints
the outbound advice after being generated. Shortage If this check box is selected, the application prints a
shortage list for any items that cannot be allocated. Project Cost Peg Transfers If this check box is selected, the application prints the data of the cost
peg transfers that are created during the creation of outbound
advice. Note This field is visible only if the Project Pegging functionality is
implemented. Ownership If this check box is selected, the application prints the ownership details
of the inventory specified on the outbound advice. Item/Item Group Storage Conditions If this check box is selected, the application prints the Item/Item Group Storage Conditions on
documents/reports that are printed for the outbound procedure. Warehouse/Location Storage Conditions If this check box is selected, the application prints the Warehouse/Location Storage Conditions on
documents/reports that are printed for the outbound procedure. Print to predefined Device If this check box is selected, the application selects a default printer to
print the report. The use of default printers depends on the setup. For more information, refer to Default printers. Note By default, this check box is selected. Label Printing Label Printing The print options for the labels. Label Printing Settings Label Printing Method Indicates whether and how labels are printed for the advised goods. Note This field is enabled only if Overrule Order Settings option is selected. Copies The number of copies of the label that must be
printed. Handling Units Only If this check box is selected, the labels are printed only for the items
that use handling units. Note This field is enabled only if Overrule Order Settings option is selected. Label Printed by The application allows you to specify the application that
must be used to print the labels for the defined layout. Note You can view this field only if packaging level BOD is
implemented. Default value of this field is Infor LN. The value External application is not applicable when the packaging label BOD is not
implemented. Label Layout The code of the layout of the label. You must specify a label layout if the Label Printing Method field in the current session
has one of the following values: Note This field is enabled only if the check box Handling Units Only is cleared. This field is enabled only if Overrule Order Settings option is selected. | |