Purchase Schedule Lines (tdpur3111m200)

Use this session to view the purchase schedule lines that are displayed based on the filter settings in the Purchase Schedules (tdpur3610m100) session.

When you double-click a line or click New, the Purchase Schedule Lines (tdpur3111m000) session is started.

 

Receipt Date Due

The number of days until which the purchase schedule line's planned receipt date is due.

Note
  • If a negative value is displayed in this field, the schedule line is already due and the number of days after the planned receipt date is displayed.
  • If the purchase schedule line is already received, no value is specified in this field.
Schedule

The number of the purchase schedule.

For pull schedules, the same schedule number can occur two times in the Purchase Schedules (tdpur3110m000) session. The first number represents the Pull Forecast schedule type and the second number represents the Pull Call-off schedule type.

Note

You can specify the default number group for purchase schedules in the Number Group for Purchase Orders / Purchase Schedules field of the Purchase Schedule Parameters (tdpur0100m500) session.

You can determine the default series for the purchase schedule number group in the following sessions:

  • Purchase Offices (tdpur0112m000)
  • Purchase User Profiles (tdpur0143m000)
Line

The number of the schedule line. This number uniquely identifies each requirement of an item that a specified business partner must supply at a specific date and time.

Note

For purchase schedule lines that are manually specified, you can determine the default step size in the Step Size for Purchase Schedule Lines field of the Purchase Schedule Parameters (tdpur0100m500) session. For purchase schedules that are automatically generated, to avoid position numbers getting exhausted too soon, step size 1 is used.

Buy-from Business Partner

The buy-from business partner who is derived from the schedule header.

Note

This field cannot be changed on schedule line level.

Ship-from Business Partner

The ship-from business partner who is derived from the schedule header.

Note

This field cannot be changed on schedule line level.

Item

The item that is derived from the schedule header.

Note

If the Option List ID is also filled in this session, the item is a configured item.

Schedule Quantity

The schedule quantity that is required by the supplier.

Note

Enterprise Planning uses this field to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Quantity Unit

The unit in which the Required Ordered Quantity is expressed.

Inventory on Hand

The inventory on hand that is allocated in the warehouse, expressed in the purchase unit.

Inventory on Hand

The inventory on hand that is allocated in the warehouse, expressed in the inventory unit.

Inventory on Order

The total quantity of supply orders that is demand pegged and will be received in the warehouse, expressed in the purchase unit.

Inventory on Order

The total quantity of supply orders that is demand pegged and will be received in the warehouse, expressed in the inventory unit.

Unallocated

The inventory on hand that is not allocated in the Warehouse, expressed in the purchase unit.

Unallocated

The inventory on hand that is not allocated in the Warehouse, expressed in the inventory unit.

Purchase Type

A purchase order property that enables you to identify the kind of purchase made and in this way, the kind of payable. This property is used to post the purchase to the correct Accounts Payable account when the invoice is created. To post a purchase invoice, LN retrieves the control account from the purchase type linked to the purchase order line.

Note

A control account is defined for every purchase type. When purchase invoices are posted, LN retrieves the purchase type to determine the control account that must be used for posting.

Invoiced Quantity

The invoiced quantity of all approved invoices linked to this schedule line, expressed in the purchase unit.

Invoiced Quantity in Inventory Unit

The invoiced quantity of all approved invoices linked to this schedule line, expressed in the inventory unit.

Note

If the Method of Calculating Average Purchase Price field in the Purchase Order Parameters (tdpur0100m400) session has the value Current Inventory, the current field is also filled when partial invoices are approved. The reason for this is to make correct calculations for the average purchase price.

Invoice Amount

The invoiced quantity times the purchase price of all approved invoices linked to this schedule line.

Invoice Date

The date on which the invoice is printed.

Invoice

The identification of an invoice, which consists of the transaction-type code and the first free number in the series used for invoices for the order type.

Payment

Use this field to define the payment between the purchase office, which issues the purchase schedule, and the supplier.

Note

This field is set to:

  • Pay on Use if the Consigned check box is selected for the purchase schedule.
  • Pay on Receipt when delivering to a warehouse with a linked sold-to business partner.
  • Pay on Receipt for items that are not received in a warehouse.

For push schedules with a linked blanket warehouse order, this field is defaulted from the Payment field of the Purchase Schedules (tdpur3110m000) session.

For sequence shipping schedules, if the Option List ID is specified for any of the linked sequence shipping data records in the Sequence Shipping data (tdpur3517m000) session, you cannot select Pay on Use or No Payment.

Allowed values

Payment

Planned Receipt Date

The planned date on which the items on the order/schedule line are planned to be received. The planned receipt date cannot occur before the order date/schedule generation date.

The planned receipt date is important for schedules that are Receipt Based, as defaulted from the Shipment/Receipt Based field of the Purchase Schedules (tdpur3110m000) session.

The planned receipt date is used to:

Note

If the schedule is Shipment Based, you can calculate the planned receipt date from the planned shipment date.

Payment (Internally)

Use this field to define the payment between the purchase office, which issues the purchase schedule, and the warehouse, which receives the purchase schedule.

Note

This field:

  • Is set to Pay on Receipt when delivering to a project (without a warehouse), or a work center.
  • Is set to Not Applicable if the Payment field is set to No Payment.
  • Cannot be set to No Payment.
  • Is defaulted from the Payment (Internally) field of the Purchase Schedules (tdpur3110m000) session for push schedules with a linked blanket warehouse order.

Allowed values

Payment

Payment (Direct Delivery)

Use this field to define the payment between the purchase office, which issues the purchase schedule, and the customer.

This field applies if a purchase schedule is created at the supplier's site for directly delivering goods to a VMI warehouse at the customer's site by a third party.

Note

This field:

  • Must be set to Pay on Use or No Payment if the warehouse has a sold-to business partner linked to it.
  • Is set to Not Applicable if the warehouse has no linked sold-to business partner.
  • Cannot be set to Pay on Receipt, because no sales orders can be generated for purchase schedules.
  • Is defaulted from the Payment (Direct Delivery) field of the Purchase Schedules (tdpur3110m000) session for push schedules with a linked blanket warehouse order.

Allowed values

Payment

Tax Classification

An attribute of order headers and order lines that you can use to define tax exceptions for the transaction. LN retrieves the default tax classification from the invoice-from and invoice-to business partners.

For example, you can use the tax classification to indicate:

  • That payments to an invoice-from business partner are subject to withholding tax and social contributions
  • To group business partners that have the same tax aspects for your company, for example, subcontractors, or agents
  • That the tax must be paid in a country other than the sales office or service office's home country

Default value

This field is defaulted from the purchase schedule header.

Exempt

If this check box is selected, tax exemption applies.

Note

If the Tax Exempt Level parameter in the Tax Parameters (tctax0100m000) session is set to:

  • Limited and you select this check box manually, the Tax Code is defaulted from the Exempt Purchase field of the Tax Handling (tctax0138m000) session. If you clear this check box manually, the tax code is not changed.
  • Extended and you select this check box manually, the Tax Code is not changed. If you clear this check box manually, the Exempt Reason and Exempt Certificate fields are cleared and disabled.
Tax Country

The country used for tax purposes.

Own Tax Number

A number used to identify legal persons or businesses. The tax authorities assign the tax numbers to the registered businesses. Your business partners must provide you with their tax number. Business partners without a tax number are considered to be private persons.

Tax Code

The tax code that applies to the purchase schedule line.

Note

The tax code that can be entered in this field can only be of the VAT kind.

Planned Shipment Date

The planned date on which the items on the order/schedule line must be shipped/picked up at the ship from business partner's site. The planned shipment date cannot fall before the order date.

The planned shipment date is important for schedules that are Shipment Based, as defaulted from the Shipment/Receipt Based field of the Purchase Schedules (tdpur3110m000) session.

The planned shipment date is used to determine in which segment the schedule falls, and, consequently to cluster schedule lines and calculate a schedule line's requirement type.

Note

If the schedule is Receipt Based, you can calculate the planned shipment date from the planned receipt date.

BP Tax Country

The country in which the business partner has the tax ID.

BP Tax Number

The business partner's tax ID.

Note

The business partner's tax ID is date effective. To determine and display the correct tax ID for the business partner, LN uses the planned receipt date.

Exempt Certificate

Your own exemption certificate.

Note
  • LN prints the exempt reasons on the invoices.
  • This field only applies if the Tax Exempt Level parameter is set to Extended in the Tax Parameters (tctax0100m000) session.
  • This field is defaulted from the method that is used to retrieve tax details, as defined in the Search Sequence Tax Libraries group box of the Tax Parameters (tctax0100m000) session.
Exempt Reason

The reason why your own company is exempt from sales tax.

Note
  • This field only applies if the Tax Exempt Level parameter is set to Extended in the Tax Parameters (tctax0100m000) session.
  • This field is defaulted from the method that is used to retrieve tax details, as defined in the Search Sequence Tax Libraries group box of the Tax Parameters (tctax0100m000) session.
  • The reason code must be of the Tax Exemption type and must be date effective, as valuated by the Planned Receipt Date.
Project

The code of the project for which the item is required.

Note
  • You can only enter TP projects in this field. PCS projects are not allowed.
  • You can only enter a project code in this field for push schedules.
Element

The smallest part of an element structure. An element is used to define the (structure of the) work of the project, so that you can carry it out.

Requirement Type

The requirement type of the purchase schedule line.

If the requirement type in which the schedule line falls changes as a result of regeneration, the requirement type is updated according to the new segment set. The new requirement type is then stored on the schedule line.

Note

For pull schedules of the type Call-off, no segment sets are used. The requirement type is always Firm.

Allowed values

Requirement Type

Activity

The unique identification of an activity.

Extension

The parts of projects for which special arrangements are have been made that concern invoicing, such as variations, provisional amounts, quantities to be settled, and fluctuation settlements. An extension can be attached to one or more budget lines.

Note

This field is empty and unavailable if the Peg Distribution check box is selected in this session.

Related topics

Cost Component

A cost component is a user-defined category for the classification of costs.

Cost components have the following functions:

  • To break down an item's standard cost, sales price, or valuation price.
  • To create a comparison between the estimated production order costs and the actual production order costs.
  • To calculate production variances.
  • To view the distribution of your costs over the various cost components in the Cost Accounting module.

Cost components can be of the following cost types:

  • Material Costs
  • Operation Costs
  • Surcharge on Material Costs
  • Surcharge on Operation Costs
  • WIP Transfer Costs
  • General Costs
Note

If you use Assembly Control (ASC), you cannot use cost components of the General Costs type.

Note

This field is empty and unavailable if the Peg Distribution check box is selected in this session.

Status

The schedule line's status.

Note

If the Use Confirmation check box is selected in the Buy-from Business Partner (tccom4120s000) session, you cannot approve a purchase schedule line before the Confirmed Quantity and Confirmation Date fields are filled.

Allowed values

Purchase Schedule Status

Purchase Schedule Type
Preferred Manufacturer Part Number

The preferred manufacturer part number (MPN) for the scheduled item.

Note

The MPN must have the status Approved on the requirement date, which is the planned delivery date.

Manufacturer

The item's manufacturer or the manufacturer that is linked to the manufacturer part number (MPN).

Item Revision

The revision of the engineering item.

Related topics

Schedule Quantity

The schedule quantity expressed in the purchase unit.

This field is filled with the value of the:

  • Confirmed Quantity field if the Confirmation Date is filled.
  • Required Ordered Quantity field if the Confirmation Date is not filled.
Purchase Unit

The unit in which you purchase an item, also referred to as the purchase quantity unit.

Note

The unit set in which the unit is stored must be linked to the item in the Items - Defaults (tcibd0102m000) session.

You can define units in the Units (tcmcs0101m000) session, unit sets in the Unit Sets (tcmcs0106m000) session, and units by unit set in the Units by Unit Set (tcmcs0112m000) session.

Note
  • A conversion factor must be linked to the item in the Conversion Factors (tcibd0103m000) session.
  • If a contract is linked to the schedule, the unit defined in the Purchase Contract Lines (tdpur3101m000) session is used by default. If no contract is linked, LN uses the purchase unit that is specified in the Items - Purchase (tdipu0101m000) session.

Related topics

Schedule Quantityin Inventory Unit

The schedule quantity that is required by the supplier, expressed in the inventory unit..

Note

Enterprise Planning uses this field to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Inventory Unit

The unit of measure in which the inventory of an item is recorded, such as piece, kilogram, box of 12, or meter.

The inventory unit is also used as the base unit in measure conversions, especially for conversions that concern the order unit and the price unit on a purchase order or a sales order. These conversions always use the inventory unit as the base unit. An inventory unit therefore applies to all item types, also to item types that cannot be kept in stock.

Schedule Quantityin Inventory Unit

The schedule quantity converted to the inventory unit.

This field is filled with the value of the:

  • Confirmed Quantity field if the Confirmation Date is filled.
  • Required Schedule Quantity field if the Confirmation Date is not filled.
Confirmed Quantity

The schedule quantity that is confirmed by the supplier.

Note

Enterprise Planning uses this field to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Default value

This field is defaulted from the Confirmed Quantity field of the Purchase Release Line - Details (tdpur3522m000) session.

Confirmed Quantity Unit

The unit in which the Confirmed Quantity is expressed.

Default value

This field is defaulted from the Confirmed Quantity Unit field of the Purchase Release Line - Details (tdpur3522m000) session.

Confirmed Quantity in Inventory Unit

The schedule quantity that is confirmed by the supplier, expressed in the inventory unit.

Note

Enterprise Planning uses this field to check whether the confirmed quantities are enough to meet the planned quantities, or whether additional supply is required.

Default value

This field is defaulted from the Confirmed Ordered Quantity field of the Purchase Release Line - Details (tdpur3522m000) session.

Confirmation Date

The date on which the supplier confirmed the schedule quantity.

Default value

This field is defaulted from the Confirmation Date field of the Purchase Release Line - Details (tdpur3522m000) session.

Confirmation Accepted

If this check box is selected, the Confirmed Quantity is accepted by the buyer. No further negociations are possible with the supplier.

Note
  • This field can only be filled if the Use Confirmation (Purchase) check box is selected in the Implemented Software Components (tccom0100s000) session.
  • If a confirmed quantity of zero is accepted, the schedule line is canceled automatically.

Default value

This field is defaulted from the Confirmation Accepted field of the Purchase Release Line - Details (tdpur3522m000) session.

Firm Planned

If this check box is selected, during the next run of Enterprise Planning, the schedule line cannot be changed.

Note

If you click Undo Firm Planned on the appropriate menu of this session, you can change the schedule line's status to Firm.

Reference ID

The unique identification of the call-off that is linked to a referenced schedule, retrieved from a supply system.

The reference ID can be retrieved from one of the following supply systems:

To generate schedule lines from Assembly Control (ASC)

If the supply system is order controlled supply in line sequencing (SILS), a reference number/ID is generated in the Assembly Control (ASC) module, which represents a combination of Vehicle number (VIN), Line Station, and Assembly Kit. For this reason, a one-to-one relationship exists between the schedule line reference and the sequence shipping data, as stored in the Sequence Shipping data (tdpur3517m000) session. The reference ID is a unique field, which informs you about all items that must be packed together or that must be treated as a single entity.

If the supply system is order controlled batch, in the Assembly Control (ASC) module, a reference ID is created for each material line.

To generate schedule lines from Warehousing

If pull call-off schedule lines are generated from Warehousing, the reference ID is generated while creating the purchase schedule line. The reference ID stored in the current field is used as an individual reference for the pull call-off schedule line.

Note

If pull call-off schedule lines are generated from Warehousing, the generated reference ID is derived from the number group as entered in the Number Group for Call-offs field of the Purchase Schedule Parameters (tdpur0100m500) session.

Release

The number of the purchase release.

If this field is filled, a purchase release has already been sent to the supplier for this particular schedule line.

Related topics

Transactions Logged

If this check box is selected, transactions have been logged for the schedule line.

Note

Transactions are logged based on the value of the Transaction Time Fence field of the Purchase Contract Line Logistic Data (tdpur3102m000)/ Items - Purchase Business Partner (tdipu0110m000) session.

Schedule Text

If this check box is selected, a specific text with, for example, additional reference information is available.

Peg Distribution

If this check box is selected, a peg distribution is linked to this Purchase Schedule Line.

Note

Manual changes in this session can affect the linked peg distribution. If this is the case, and if the Manual Project Peg Modification check box is selected in the Project Pegging Parameters (tcpeg0100m000) session, a window is displayed in which you must specify the change reason. The project peg changes and the reason codes are logged in the Cost Peg Audit History (tpctm2500m000) session.

Subject to Trade Compliance

If this check box is selected, global trade compliance applies to the line.

Note

This field is available only if the Import Compliance check box is selected in the Global Trade Compliance Parameters (tcgtc0100m000) session.

Address

The address of the ship-from business partner.

Contact
Warehouse

The code of the warehouse where the goods must be delivered.

You must fill this field in case of standard items. In case of cost items, service items, project subcontracting, and equipment items, this field must be left empty. Project and equipment items are delivered at te project's address.

Address

The address of the warehouse or place where the goods must be delivered.

Extra Intrastat Info

Statistical import/export data that is not available as standard information in LN, but which is required on the sales listing or the Intrastat declaration by some of the EU member states.

You can add up to 15 data fields to the Intrastat statistical data by defining them as extra Intrastat information set. You can assign the extra Intrastat information sets to warehouse order lines.

Related topics

Customs Value

The tax that is levied on an export article's value.

The customs value is used during the customs check. If this field is filled, the customs value need not be calculated when passing the customs, which saves time and transport costs.

Restrictions

The customs value only applies:

  • To deliveries, not to receipts. As a result, this field can only be filled if goods must be returned.
  • If the goods are delivered by Warehousing. If this field is filled and you release the order to Warehousing, the customs value is defaulted to the Outbound Order Lines (whinh2120m000) session.
Note

If the Payment field is set to No Payment, the item's standard cost is displayed by default.

Schedule Currency

The currency in which the amounts on the purchase schedule are expressed.

Note

If the currency of the linked purchase contract price revision changes, the schedule currency is also changed.

Price Unit

The item unit in which an item's purchase price is expressed. This unit can differ from the item's inventory unit.

Price

The price you pay for an item, expressed in the purchase currency.

Note
  • If the business partner is an external business partner, prices and discounts are defaulted from the linked Purchase Contract Prices (tdpur3103m000) session.
  • If the item is a configurable item and the Option Based Pricing check box is selected in the Purchase Contract Lines (tdpur3101m000) session, the price is retrieved from the generic price list in the Generic Price Lists (tipcf4101m000) session.
  • If the Payment field is set to No Payment, the price is zero.
  • If the Material Pricing in Procurement check box is selected in the Material Price Parameters (tcmpr0100m000) session, this price can include material prices.
Schedule Amount

The cumulative order amount of all lines in a schedule after discounts are deducted.

Note

If the Payment field is set to Pay on Receipt, received schedule lines are not taken into account in the schedule amount calculation.

Total Discount Amount

The schedule line's total discount amount.

Total Discount %

The total of all discounts that are applied to the schedule line, expressed as a percentage.

Net Amount

The purchase schedule line's total net amount.

The net amount is calculated as follows:

Purchase schedule line quantity * price - discount. 
Note

f the purchase schedule is linked to a contract, prices and discounts are defaulted from the linked Purchase Contract Prices (tdpur3103m000) session. If no contract is linked to the purchase schedule, prices and discounts are retrieved from the Item Purchase Data module.

Landed Cost Amount

The total of all costs that are associated with the procurement of an item until delivery and receipt in a warehouse. Landed costs typically include freight costs, insurance costs, customs duties, and handling costs.

In LN, landed costs can be part of multiple landed costs sets.

Shipped Quantity

The shipped quantity expressed in the purchase unit.

Note

This field is only filled if you use advance shipment notices.

Shipped Quantityin Inventory Unit

The shipped quantity expressed in the inventory unit.

Note

This field is only filled if you use advance shipment notices.

Received Quantity

The actually delivered quantity of items on the purchase schedule line, expressed in the purchase unit.

When a receipt is confirmed/corrected in Warehousing, this quantity is updated in Purchase Control (PUR).

Received Quantity in Inventory Unit

The actually delivered quantity of items on the purchase schedule line, expressed in the inventory unit.

Approved Quantity

The approved quantity on the schedule line, expressed in the purchase unit.

If received goods must be inspected in a company, LN retrieves the approved quantity from the Warehouse Inspections Overview (whinh3122m000) session. If received goods need not be inspected, this field is equal to the value of the Received Quantity field.

Note

In the Inspection field of the Purchase Contract Lines (tdpur3101m000) session and/or in the Inspection field of the Items - Purchase Business Partner (tdipu0110m000) session, you can define for a company whether goods must be inspected upon receipt.

Approved Quantity in Inventory Unit

The approved quantity on the schedule line, expressed in the inventory unit.

Rejected Quantity

The rejected quantity on the schedule line, expressed in the purchase unit.

If received goods must be inspected in a company, LN retrieves the rejected quantity from the Warehouse Inspections Overview (whinh3122m000) session. If received goods need not be inspected, this field is always 0.

Note

In the Inspection field of the Purchase Contract Lines (tdpur3101m000) session and/or in the Inspection field of the Items - Purchase Business Partner (tdipu0110m000) session, you can define for a company whether goods must be inspected upon receipt.

Rejected Quantity in Inventory Unit

The rejected quantity on the schedule line, expressed in the inventory unit.

Received Amount

The received quantity * (price - discount amount per schedule line).

Note

If a receipt is confirmed for a configured item that deviates from the ordered configured item, in the Sequence Shipping data (tdpur3517m000) session, LN retrieves the price and discounts from the last Sent sequence shipping schedule line revision with a configured item that is equal to the received configured item. Otherwise, the price and discounts from the current session are used to calculate the amount.

Last ASN

The latest advance shipment notice (ASN) number received from the supplier for goods to be shipped.

Click Shipment Notice to view information about the last supplier's ASN in the Shipment Notice (whinh3600m000) session.

Last Shipment ID

The latest shipment ID linked to the schedule line.

Click Shipment Notice to view information about the last shipment ID in the Shipment Notice (whinh3600m000) session.

Receipt

The latest receipt number that identifies a receipt of goods on the schedule line. As soon as receipts are confirmed in Warehousing, this number is communicated to the Purchase Control module.

Note

You can have more than one receipt on a particular schedule line. To view partial receipt details for a schedule line, on the appropriate menu, click Receipts. This command starts the Purchase Schedule - Receipts (tdpur3115m200) session, in which you can view all receipt quantities and receipt numbers for a particular schedule line.

Receipt Date

The latest receipt date of the goods.

Note

As soon as a receipt is confirmed in Warehousing, this number is communicated to the Purchase Control (PUR) module.

Demand Pegged to Sold-to Business Partner

The sold-to business partner to which this supply object has been demand pegged.

LN can use the items supplied by the current schedule to fulfill a schedule for the sold-to business partner displayed in this field.

Demand Pegged to Ship-to Business Partner

The ship-to business partner to which this supply object has been demand pegged.

LN can use the items supplied by the current schedule to fulfill a schedule for the ship-to business partner displayed in this field.

Demand Pegged to Business Object

The type of order to which this schedule has been demand pegged.

Note

The following fields are always used in combination; together, they identify the relevant order or order line:

  • Business Object Type
  • Business Object
  • Business Object Reference
Business Object

The order, or order line, to which the items in this schedule have been demand pegged.

Note

The following fields are always used in combination; together, they identify the relevant order or order line:

  • Business Object Type
  • Business Object
  • Business Object Reference
Demand Pegged to Reference

The reference code to which this supply object has been demand pegged.

LN can only use the items supplied by the current schedule to fulfill a demand specified by the reference displayed in this field.

LN can use this field in two ways:

  • If the Sold-to Business Partner field is filled, LN uses the Reference field to record a reference code defined by a customer.
  • If the Sold-to Business Partner field is empty, LN uses the Reference field to record an internal reference.

You can use a reference code to keep a collection of parts linked together, even if they follow different routings, for example, if some of the parts are transported to a subcontractor to be returned later.

Option List ID

The identification of the options and features for a configured item. The ID is used in the item specification to match supply and demand.

Note

Click Option List to view the configured item 's options and features in the Option List (tcibd4522m000) session.

Additional Field

User-defined fields of various field formats that can be added to various sessions, in which users can edit these fields. No functional logic is linked to the contents of these fields.

Additional information fields can be linked to database tables. When linked to a table, the fields are displayed in the sessions corresponding to the database tables. For example, a field defined for the whinh200 table is displayed as an extra field in the Warehousing Orders (whinh2100m000) session.

The contents of additional fields can be transferred between database tables. For example, the information specified by a user in additional information field A of the Warehousing Orders (whinh2100m000) session is transferred to additional information field A in the Shipments (whinh4130m000) session. For this purpose, additional information fields with identical field formats and field name A must be present for the whinh200 and the whinh430 tables (whinh430 corresponds to the Shipments (whinh4130m000) session).

Click Extended Additional Information to view all additional information fields that are linked to the purchase document in the Extended Additional Information (tcstl2110m000) session.

 

Approve

Approves the schedule line, which can be done from the statuses Created and Disapproved.

Disapprove

Changes a purchase schedule line's status to Disapproved, which can be done from the statuses Approved and Created.

Cancel

Cancels the schedule line, which can be done from the statuses Created, Approved, Disapproved, and Order Generated. To cancel a line for which a release is sent, the original line receives the status Canceled and a new release is created for the line to inform the supplier about the cancellation of the line.

Make Firm Planned

If a schedule is made Firm Planned, during the next run of Enterprise Planning, the line cannot be changed.

Undo Firm Planned

If the Firm Planned check box is selected and you click Undo Firm Planned, the schedule line's status changes to Firm.