Shipment Lines (fmlbd3150m000)

Use this session to view and maintain shipment lines. A shipment has one or more shipment lines. Shipments and shipment lines are created using the load building engine or can be created manually.

Print options

On the Print submenu of the File menu, the following print options are available for selected shipments:

  • Shipments
    Print shipment and shipment line details.
  • Planning
    Print planning data grouped by freight order, originating order, or load.
  • Available Inventory for Shipment Lines
    Print the available inventory.
Note

If the value of the Ship-from Type field is Warehouse, the available inventory for the item on the shipment line is shown in the following fields:

  • Originating Warehouse
  • On Hand
  • On Order
  • Allocated
  • Committed

 

Shipment Line

The identification number of the shipment to which the shipment lines belong.

Shipment Line

The position number of the shipment line.

Status

The status expresses the progress of the shipment in its life cycle from creation in Freight, through execution in Warehousing, to completion after approval in the Accounts Payable module of Financials.

BOM Line

The identification number of the component item line.

Additional Cost Line

If this check box is selected, the current shipment line is an additional cost line. If additional costs must be paid for the goods listed on a shipment line, an additional cost set is linked to the shipment line. LN does this by creating a new shipment line where it stores the additional cost set. The new shipment line, called additional cost line, is then linked to the shipment line that lists the goods for which the additional costs must be paid.

Plan

The load plan to which the shipment of the shipment line belongs.

Load

The load to which the shipment of the shipment line belongs.

Freight Order Line

The identification number of the freight order on which the shipment line is based.

Freight Order Line

The position number of the freight order line on which the shipment is based.

Item

The item that must be transported. If the status is Completed or Closed, the item has reached the destination address.

Inventory Handling

In Warehousing, items are processed by component or by main item. If the value in this field is By Component, the originating order from which the current shipment line is derived is processed by component and the shipment line includes component items. If the originating order is processed by main item, the shipment line lists only main items.

Origin

The origin of the order from which the freight order of the current shipment line originates.

Originating Order

The identification number of the order from which the freight order of the current shipment line originates.

Reference

Any informative description field used to refer to, for example:

  • The person or department with authorization to perform a specific task.
  • The business partner's contact.
  • The original invoice number.
Delivery Point

The location where the shipment must be delivered by the carrier. For more information, refer to Shipment building in Freight.

Note
  • The value is retrieved from the Delivery Point field in the Freight Order Lines (fmfoc2101m000) session if the Single Delivery Point per Shipment check box is selected.
Delivery Point

The description or name of the code.

Customer Order

The customer order number based on which the goods are pickedup from the supplier site. All the shipment lines that have the same customer number are combined into a single shipment. If an existing shipment is not found, LN creates a new shipment for freight order line.

For more information, refer to Shipment building in Freight.

Shipment Reference

The shipment reference based on which the goods are picked up from the supplier site. The shipment reference, among other criteria, determines how the goods issued/picked up from the supplier warehouse are grouped into shipments. The items that have the same Shipment Reference must be grouped into one shipment to the customer. In the automotive business this is called a Pickup Sheet (PUS) process. For more information, refer to Shipment building in Freight.

Note
  • The value is retrieved from the Shipment Reference field in the Freight Order Lines (fmfoc2101m000) session if the Single Shipment Reference per Shipment check box is selected.
  • The field is derived if the shipment line has the Confirmed status.
Text

If this check box is selected, additional text about the current shipment line is available. To create a text, click [...] or press CTRL-T.

Planned Quantity

The quantity of the shipment line that is planned for transportation.

Planned Quantity

The unit used to express the quantity of the item.

Ordered Quantity in Storage Unit

The ordered quantity of the item. The ordered quantity can be changed until the shipment line obtains the In Progress status.

Ordered Quantity

The unit used to express the quantity of the item.

Shipped Quantity

The confirmed quantity of the item that is actually shipped. This quantity can differ from the ordered quantity due to insufficient loading capacity, damage during loading or unloading, and so on.

BOM Quantity

The BOM quantity of the item.

BOM Quantity

The unit by which the BOM quantity is expressed.

Ordered Quantity Main Item

The ordered quantity for the main item. This field is filled if a Bill of Materials (BOM) exists for the item.

Planned Quantity Main Item

The planned quantity for the main item. This field is filled if a Bill of Materials (BOM) exists for the item.

Shipped Quantity Main Item

The shipped quantity for the main item. This field is filled if a Bill of Materials (BOM) exists for the item.

Ordered Quantity

The ordered quantity expressed in the inventory unit.

Planned Quantity

The planned quantity expressed in the inventory unit.

Shipped Quantity

The shipped quantity expressed in the inventory unit.

Delivered Quantity

The quantity of the goods that was delivered to the customer’s location. This quantity is expressed in the inventory unit. By default, Warehousing fills this field with the shipped quantity for outbound shipment lines; inbound shipment lines receive the receipt quantity. If the shipment line is not linked to Warehousing, the status of the shipment line is manually changed in the Confirm Delivery / Receipt (fmlbd3252m000) session. If the status is changed to Shipped, the Shipped Quantity Planned Quantity field and the shipped capacity fields are filled by default with the values from the Planned Quantity field and the planned capacity fields. If the status is changed to Completed, the Delivered Quantity field and the delivered capacity fields are filled by default with the values from the Shipped Quantity field and the shipped capacity fields. If the status of a shipment line is Completed, this field becomes available for manual changes. You can then enter the delivered quantity when the customer has provided you with this information.

Damaged Quantity

The quantity of the goods that were damaged during loading, transport, or unloading. You can manually enter the damaged quantity when the carrier has provided you with this information.

Reason for Damage

The reason code that explains the cause of the damage.

Originating Warehouse

The warehouse from which the goods listed on the freight order line are shipped.

On Hand

The physical quantity of goods in one or more warehouses (including the inventory on hold).

Default value

This field is defaulted from the On Hand field of the Item Inventory (whwmd4100m100) session.

Inventory Unit

The unit of measure in which the inventory of an item is recorded, such as piece, kilogram, box of 12, or meter.

The inventory unit is also used as the base unit in measure conversions, especially for conversions that concern the order unit and the price unit on a purchase order or a sales order. These conversions always use the inventory unit as the base unit. An inventory unit therefore applies to all item types, also to item types that cannot be kept in stock.

On Order

The planned receipts. The inventory has been received and the inbound advice is generated. However, the advice is not yet released. This quantity is included in the economic stock.

Default value

This field is defaulted from the Inventory on Order field of the Item Inventory (whwmd4100m100) session.

Allocated

Inventory throughout all warehouses that is allocated to outbound order lines. After the inventory is shipped, that is, has left the warehouse, the allocation is deleted. Also referred to as standard allocation or soft allocation. See also inventory location allocation.

Default value

This field is defaulted from the Allocated Inventory field of the Item Inventory (whwmd4100m100) session.

Committed

A quantity of goods that is blocked. On-hold inventory can arise when the location, the lot, the zone, or the stock point is blocked. You can block inventory for various reasons, for example, for inspection or cycle-counting.

If a location has been blocked for all transactions, the blocked quantity is equal to the inventory on hand. You cannot partially block the inventory at a location.

Default value

This field is defaulted from the Committed field of the Item Inventory (whwmd4100m100) session.

Weight

The aggregated weight of the planned goods listed in the current shipment line.

Weight

The unit used to express the weight.

Volume

The aggregated volume of the goods listed on the current shipment line.

Volume

The unit used to express the volume of the goods listed on the shipment line.

Floor Space

The aggregated surface area of the goods listed on the shipment line.

Floor Space

The unit used to express the surface area.

Pieces

The aggregated piece unit quantity of the goods listed on the shipment line.

Shipped Weight

The actual weight of the goods listed on the shipment line. This is the weight of the goods after the shipment line is given the Confirmed status in Warehousing.

If the cost allocation is based on weight, this value must be higher than zero after the shipment line has received the Shipped status.

Shipped Volume

The aggregated volume of the goods that were shipped. The value in this field is derived from the shipped quantity and the Planned Volume field. This is the volume of the goods after the shipment line is given the Confirmed status in Warehousing, provided that the shipment is not based on manually created freight orders.

If the cost allocation is based on volume, this value must be higher than zero after the shipment line has received the Shipped status.

Shipped Floor Space

The aggregated floor space of the goods that were shipped. The value in this field is derived from the shipped quantity and the Planned Floor Space field. This is the surface area of the goods after the shipment line is given the Confirmed status in Warehousing, provided that the shipment is not based on manually created freight orders.

If the cost allocation is based on floor space, this value must be higher than zero after the shipment line has received the Shipped status.

Shipped Pieces

The aggregated piece unit quantity of the goods listed on the shipment line. The value in this field is derived from the shipped quantity and the Pieces field. This is the piece unit quantity of the goods after the shipment line is given the Confirmed status in Warehousing, provided that the shipment is not based on manually created freight orders.

Delivered Weight

The aggregated weight of the goods that were delivered to the customer’s location. The value in this field is derived from the delivered quantity and the Shipped Weight field.

Delivered Volume

The aggregated volume of the goods that were delivered at the customer’s. The value in this field is derived from the delivered quantity and the Shipped Volume field.

Delivered Floor Space

The aggregated floor space of the goods that were delivered at the customer’s. The value in this field is derived from the delivered quantity and the Shipped Floor Space field.

Delivered Pieces

The aggregated piece unit quantity of the goods delivered at the customer's. The value in this field is derived from the delivered quantity and the Shipped Pieces field.

Piece Unit
Planned Additional Rate Quantity

A quantity by unit against which you can define freight rates. You can choose from the units defined in Common. Many freight rates are based on distance and weight. Additional quantities/units enable you to define rates that are based on other units, such as volume, or define rates that are based on combinations of distance, weight, and other units.

Example 1

Freight rate by additional quantity/unit:

Additional Rate Quantity: 1 pallet, Distance: 1000 km

Amount byDistance: 10

Example 2

Freight rates by combinations of units by distance/zone:

Weight: 10 kg

Additional Rate Quantity: 1 m³

Break Type: Minimum

Distance:0100500
Amount byDistance101520
Amount byWeight5510
Amount byAdditional Rate Unit557

 

In this example, freight rates are based on distance by weight and volume. Shipment SH0001, from Amsterdam to Rotterdam, includes the following details: Distance: 70 km, Weight: 50 kg, Volume: 7 m³

The freight costs for shipment SH0001 are:

 10 * 70 (distance) + 5 * 50 (weight) + 5 * 7 (volume) = 985 
Planned Quantity

A quantity by unit against which you can define freight rates. You can choose from the units defined in Common. Many freight rates are based on distance and weight. Additional quantities/units enable you to define rates that are based on other units, such as volume, or define rates that are based on combinations of distance, weight, and other units.

Example 1

Freight rate by additional quantity/unit:

Additional Rate Quantity: 1 pallet, Distance: 1000 km

Amount byDistance: 10

Example 2

Freight rates by combinations of units by distance/zone:

Weight: 10 kg

Additional Rate Quantity: 1 m³

Break Type: Minimum

Distance:0100500
Amount byDistance101520
Amount byWeight5510
Amount byAdditional Rate Unit557

 

In this example, freight rates are based on distance by weight and volume. Shipment SH0001, from Amsterdam to Rotterdam, includes the following details: Distance: 70 km, Weight: 50 kg, Volume: 7 m³

The freight costs for shipment SH0001 are:

 10 * 70 (distance) + 5 * 50 (weight) + 5 * 7 (volume) = 985 
Planned Freight Value

The value of the goods that are planned to be transported. The value in this field is filled from the freight order on which the shipment line is based.

Shipped Freight Value

The value of the goods that are planned to be transported. The value in this field is filled from the freight order on which the shipment line is based.

Planned Freight Value

The currency by which the freight value is expressed.

Estimated Freight Cost

The estimated freight costs of the shipment line. The estimated costs are derived from the carrier agreements maintained in the LN Pricing module, or they can be entered manually. The currency used to express the estimated freight costs is the currency defined for the buy-from business partner of the carrier selected for the current shipment line.

Recalculate for Invoice Amount

If this check box is selected, the freight cost amount must be recalculated manually due to partial deliveries or over-deliveries.

Actual Freight Cost

The estimated freight costs set to Actual Cost Final for a load or a freight order cluster by the user, or the actual amount invoiced by a carrier to the shipping office to carry out the transportation of particular goods.

Actual Cost Final

If this check box is selected, the actual costs of the carrier invoice that have been approved by Financials for the current shipment line. If invoicing is not based on a carrier invoice, this check box is selected when the estimated costs for the load to which the shipment line belongs belongs is made actual and final.

Shipment Line Text

The text about the current shipment line. To edit the text or to write new text, click [...] or press CTRL-T.

 

Set to Ignored

Use this command to set selected shipment lines to Ignored. Shipment lines with the Ignored status are not processed further and can be deleted. For example, you must set a shipment line to Ignored in the following situations:

  • An inbound shipment is set to Shipped, but the goods are never received because the shipment was heavily damaged during transport. If you do not set the shipment lines to Ignored, the shipment lines and related shipments and loads retain the Shipped status indefinitely.
  • An inbound shipment is set to Shipped, but the supplier delivered the goods on a shipment other than the one listed in the Planned Loads/Shipments (whinh4180m000) session. Likewise, if you do not set the shipment lines to Ignored, the shipment lines and related shipments and loads retain the Shipped status indefinitely.

Note that in Warehousing loads and shipments are automatically set to Ignored if you do not advise the quantity of the shipment or load on the warehousing order related to the load or shipment. For further information, see Planned Loads/Shipments Status.

You can delete Ignored shipment lines by selecting the shipment line that you want to delete and use the Delete Record command. You cannot delete entire Ignored shipments or loads. A shipment is deleted when the shipment lines are deleted, a load is deleted when the shipments are deleted.

Print Shipments

Starts the Print Shipments (fmlbd3400m000) session. By default, LN starts this session to print the report.